Originally posted by kewlguy98:

---

anti virus turned off windows firewall off `bought new cables if i ping the ip it works mabe 1 or 2 out of the 3 pings other one times out ive no wireless using cross network cable no other networks turned on

---

Originally posted by kewlguy98:

---

im getting passed loggin (sometimes) username root password dbox2 ill go try your setting s on mine cheers

---

Originally posted by kewlguy98:

---

the 1 im using now is sportster 1.05 rc025

---

Originally posted by kewlguy98:

---

just tryed it i got connection failed then i got something like
connecting to dbox2 - ip 192.168.1.110 port 21
connected to dbox2
220 wilkomen auithrer dbox
user root
connection timed out

---

Originally posted by kewlguy98:

---

Originally posted by trikytrix:

---

Originally posted by heike:

---

HOPE THIS HELPS


i have flashed four dbox2 boxes today so here is how to

you will need

laky-pro 1(from BIGMAQ tool-bar)

Image flashing assistant (GOOGLE)

null-modem cable how do i get image flashing assistant and laky pro 1?

patch/crossover-cable



Now we need to setup the dbox to use ftp easily via your existing patch/crossover-cable.

1.Get your dbox remote in your hand press dbox.
2.Select the settings menu press ok.
3.Select network then press ok.
4.Change ip address to 192.168.0.100
5.Change subnet mask to 255.255.255.0
6.change default gateway to 192.168.254.2
7.Save all setting press the home button.


Now plug your patch/crossover-cable into the back off the dbox.
Some off you might not have a rj45 lead spare, So use the one that the routers got
plugged into.

It the lead that plugs into your current computer network card to the broadband box.

Now we need to setup your computer to talk to the dbox via ftp

On your computer press the following (windows only)

1.Press Start
2.Press my network places
3.Press view network connections
4.Highlight local area connection.
5.Right click select properties.
6.Scroll down to tcp/ip
7.press enter.
8.Select the use the following ip.
9.Enter ip address 192.168.0.105
10.Enter subnet mask 255.255.255.0
11. Enter default gateway 192.169.254.2

Press ok shuts the window then press ok again shuts all network windows.


using your Image flashing assistant flash you dbox2 with the NEW laky-pro image

when finished flashing turn of the Image flashing assistant

un-plug your box from the mains (then restart)

select English

press blue button

select town (box will re-boot)

scan for channels

done!

ps turn off your firewall

good luck

---

---

ok done this tryed about 10 other ip configurations from other people my box flash ftp says connected logs in hangs for ages trys to download list then times out after about 6 mins of hanging ive got 2 dbox`s 1 with sportster 1 with patino ive tryed this with both and its same thing over and over for the last 3 days any one any ideas ps i did my eurovox by null modem in about 2 mins and the d boxes are 1 chip boxes

---

Originally posted by kewlguy98:

---

Originally posted by trikytrix:

---

Originally posted by heike:

---

HOPE THIS HELPS


i have flashed four dbox2 boxes today so here is how to

you will need

laky-pro 1(from BIGMAQ tool-bar)

Image flashing assistant (GOOGLE)

null-modem cable how do i get image flashing assistant and laky pro 1?

patch/crossover-cable



Now we need to setup the dbox to use ftp easily via your existing patch/crossover-cable.

1.Get your dbox remote in your hand press dbox.
2.Select the settings menu press ok.
3.Select network then press ok.
4.Change ip address to 192.168.0.100
5.Change subnet mask to 255.255.255.0
6.change default gateway to 192.168.254.2
7.Save all setting press the home button.


Now plug your patch/crossover-cable into the back off the dbox.
Some off you might not have a rj45 lead spare, So use the one that the routers got
plugged into.

It the lead that plugs into your current computer network card to the broadband box.

Now we need to setup your computer to talk to the dbox via ftp

On your computer press the following (windows only)

1.Press Start
2.Press my network places
3.Press view network connections
4.Highlight local area connection.
5.Right click select properties.
6.Scroll down to tcp/ip
7.press enter.
8.Select the use the following ip.
9.Enter ip address 192.168.0.105
10.Enter subnet mask 255.255.255.0
11. Enter default gateway 192.169.254.2

Press ok shuts the window then press ok again shuts all network windows.


using your Image flashing assistant flash you dbox2 with the NEW laky-pro image

when finished flashing turn of the Image flashing assistant

un-plug your box from the mains (then restart)

select English

press blue button

select town (box will re-boot)

scan for channels

done!

ps turn off your firewall

good luck

---

---

ok done this tryed about 10 other ip configurations from other people my box flash ftp says connected logs in hangs for ages trys to download list then times out after about 6 mins of hanging ive got 2 dbox`s 1 with sportster 1 with patino ive tryed this with both and its same thing over and over for the last 3 days any one any ideas ps i did my eurovox by null modem in about 2 mins and the d boxes are 1 chip boxes

---

Originally posted by turner123:

---

Originally posted by billie22:

---

sorry can I ask one other thing? how do I start do I have the DBox connected to the cable input? and connected to the TV? then connect both to the PC? what do I use to connect to PC I have both null modem and crossover?

---

Debug Mode?
I said earlier, we need to replace the original Betanova soft by Linux, that way the Dbox2 will be allowed to run ?unsigned? software (ie: check the Graphical User Interfaces later on). In order to do this, we need to put the Dbox2 in Debug Mode. This only needs to be done ONCE.
First let?s check if your box is not already in Debug Mode.
For this we need to apply power and to turn the dbox2 ON. (Also connect the SCART cable, no need for the feed yet).

If you can see a picture similar to that one the TV then you still have the original software -> it?s very unlikely that your Dbox2 is in Debug Mode.
If you can see the following LCD logos then you are already in Debug Mode.


The BEST website about how to put your Dbox2 into Debug Mode is http://www.dietmar-h.net/
Go there and put your Dbox2 in Debug Mode, there is 3 different ways of doing that:
-Short Circuit method -broken BR -new MHC method
For the tutorial on putting your Dbox2 into Debug Mode, you will need to find out which BMON version you have, switch the box on while holding the UP button. A number will come up similar to
01DD10081 161608
Explanation:
01 : mID (here Nokia) Dd : feID (front-end)
10 : Bmon version (here v1.0; if 12 then you have v1.2)
081 : FPrev. Software revision of the front processor (with Bmon 1,0 as SWRev designates)
16 : Internal RAM (here 16MB)
16 : External RAM (here 16MB)
08 : Flash Memory (here 8MB)

---

Originally posted by kewlguy98:

---

just tryed it i got connection failed then i got something like
connecting to dbox2 - ip 192.168.1.110 port 21
connected to dbox2
220 wilkomen auithrer dbox
user root
connection timed out

---

Originally posted by billie22:

---

Originally posted by turner123:

---

Originally posted by billie22:

---

sorry can I ask one other thing? how do I start do I have the DBox connected to the cable input? and connected to the TV? then connect both to the PC? what do I use to connect to PC I have both null modem and crossover?

---

Debug Mode?
I said earlier, we need to replace the original Betanova soft by Linux, that way the Dbox2 will be allowed to run ?unsigned? software (ie: check the Graphical User Interfaces later on). In order to do this, we need to put the Dbox2 in Debug Mode. This only needs to be done ONCE.
First let?s check if your box is not already in Debug Mode.
For this we need to apply power and to turn the dbox2 ON. (Also connect the SCART cable, no need for the feed yet).

If you can see a picture similar to that one the TV then you still have the original software -> it?s very unlikely that your Dbox2 is in Debug Mode.
If you can see the following LCD logos then you are already in Debug Mode.


The BEST website about how to put your Dbox2 into Debug Mode is http://www.dietmar-h.net/
Go there and put your Dbox2 in Debug Mode, there is 3 different ways of doing that:
-Short Circuit method -broken BR -new MHC method
For the tutorial on putting your Dbox2 into Debug Mode, you will need to find out which BMON version you have, switch the box on while holding the UP button. A number will come up similar to
01DD10081 161608
Explanation:
01 : mID (here Nokia) Dd : feID (front-end)
10 : Bmon version (here v1.0; if 12 then you have v1.2)
081 : FPrev. Software revision of the front processor (with Bmon 1,0 as SWRev designates)
16 : Internal RAM (here 16MB)
16 : External RAM (here 16MB)
08 : Flash Memory (here 8MB)

---

Hi, I think my LCD screen is faulty or broken as I did what you said and no numbers are not showing totally blank,could it be broken? if so what would I do?

---

Originally posted by heike:

---

read what i have said

laky-pro 1(from BIGMAQ tool-bar)

Image flashing assistant dbox2(GOOGLE)

---

Originally posted by turner123:

---

Originally posted by billie22:

---

Originally posted by turner123:

---

Originally posted by billie22:

---

sorry can I ask one other thing? how do I start do I have the DBox connected to the cable input? and connected to the TV? then connect both to the PC? what do I use to connect to PC I have both null modem and crossover?

---

Debug Mode?
I said earlier, we need to replace the original Betanova soft by Linux, that way the Dbox2 will be allowed to run ?unsigned? software (ie: check the Graphical User Interfaces later on). In order to do this, we need to put the Dbox2 in Debug Mode. This only needs to be done ONCE.
First let?s check if your box is not already in Debug Mode.
For this we need to apply power and to turn the dbox2 ON. (Also connect the SCART cable, no need for the feed yet).

If you can see a picture similar to that one the TV then you still have the original software -> it?s very unlikely that your Dbox2 is in Debug Mode.
If you can see the following LCD logos then you are already in Debug Mode.


The BEST website about how to put your Dbox2 into Debug Mode is http://www.dietmar-h.net/
Go there and put your Dbox2 in Debug Mode, there is 3 different ways of doing that:
-Short Circuit method -broken BR -new MHC method
For the tutorial on putting your Dbox2 into Debug Mode, you will need to find out which BMON version you have, switch the box on while holding the UP button. A number will come up similar to
01DD10081 161608
Explanation:
01 : mID (here Nokia) Dd : feID (front-end)
10 : Bmon version (here v1.0; if 12 then you have v1.2)
081 : FPrev. Software revision of the front processor (with Bmon 1,0 as SWRev designates)
16 : Internal RAM (here 16MB)
16 : External RAM (here 16MB)
08 : Flash Memory (here 8MB)

---

Hi, I think my LCD screen is faulty or broken as I did what you said and no numbers are not showing totally blank,could it be broken? if so what would I do?

---

fix it lol sorry ... can pick them up from ebay very easy to fit and could have a nice blue 1 lol same as me

---

Originally posted by billie22:

---

Originally posted by turner123:

---

Originally posted by billie22:

---

Originally posted by turner123:

---

Originally posted by billie22:

---

sorry can I ask one other thing? how do I start do I have the DBox connected to the cable input? and connected to the TV? then connect both to the PC? what do I use to connect to PC I have both null modem and crossover?

---

Debug Mode?
I said earlier, we need to replace the original Betanova soft by Linux, that way the Dbox2 will be allowed to run ?unsigned? software (ie: check the Graphical User Interfaces later on). In order to do this, we need to put the Dbox2 in Debug Mode. This only needs to be done ONCE.
First let?s check if your box is not already in Debug Mode.
For this we need to apply power and to turn the dbox2 ON. (Also connect the SCART cable, no need for the feed yet).

If you can see a picture similar to that one the TV then you still have the original software -> it?s very unlikely that your Dbox2 is in Debug Mode.
If you can see the following LCD logos then you are already in Debug Mode.


The BEST website about how to put your Dbox2 into Debug Mode is http://www.dietmar-h.net/
Go there and put your Dbox2 in Debug Mode, there is 3 different ways of doing that:
-Short Circuit method -broken BR -new MHC method
For the tutorial on putting your Dbox2 into Debug Mode, you will need to find out which BMON version you have, switch the box on while holding the UP button. A number will come up similar to
01DD10081 161608
Explanation:
01 : mID (here Nokia) Dd : feID (front-end)
10 : Bmon version (here v1.0; if 12 then you have v1.2)
081 : FPrev. Software revision of the front processor (with Bmon 1,0 as SWRev designates)
16 : Internal RAM (here 16MB)
16 : External RAM (here 16MB)
08 : Flash Memory (here 8MB)

---

Hi, I think my LCD screen is faulty or broken as I did what you said and no numbers are not showing totally blank,could it be broken? if so what would I do?

---

fix it lol sorry ... can pick them up from ebay very easy to fit and could have a nice blue 1 lol same as me

---

Is it possible to continue debug mode without LCD,as there is 3 screws on the box that I cant get of I looked on eBay and they cost £20 + P+P which I dont mind but if I cant get the box opened it would be a wast of money,what do you think?

---

Originally posted by bigclaret:

---

Originally posted by huntrob:

---

Hi, this is how i got my DBOX working -

1 - press the blue button on your DBOX - and go to option 2 Tuxbox commander.

2- then scroll down to the option that says "var" and press ok
3- scroll down to "keys" and press ok
4- scroll down to "keylist.txt and press 4 (to edit)
5- If your like me and are in the Pure NTL area your codes will start like N 5401 00 etc etc, press ok on the 1st key which starts with N 5401 00
6 - Type in this key after 00 - 46896D870724422F
7- press ok to exit then go to the key which starte "N 5401 01"
8 - type in this key after 01 - 9128EFB57B371FED
9 - Press ok to exit then press the button under your power button (under the orange button) and save changes when asked.


After that you need to deactivate your auto update because if you dont the channels will not stay on. So press the blue button again click on sportster then click on emu settings,evocamd and then emu/auto update and deactivate. Then reboot the dbox and hopefully it should work.

---

When I press the ok button after locating the get tostep number 5 all the code dissapear so I can't go any further, any sugestions pleas.?

---

Originally posted by heike:

---

Originally posted by kewlguy98:

---

Originally posted by trikytrix:

---

Originally posted by heike:

---

HOPE THIS HELPS


i have flashed four dbox2 boxes today so here is how to

you will need

laky-pro 1(from BIGMAQ tool-bar)

Image flashing assistant (GOOGLE)

null-modem cable how do i get image flashing assistant and laky pro 1?

patch/crossover-cable



Now we need to setup the dbox to use ftp easily via your existing patch/crossover-cable.

1.Get your dbox remote in your hand press dbox.
2.Select the settings menu press ok.
3.Select network then press ok.
4.Change ip address to 192.168.0.100
5.Change subnet mask to 255.255.255.0
6.change default gateway to 192.168.254.2
7.Save all setting press the home button.


Now plug your patch/crossover-cable into the back off the dbox.
Some off you might not have a rj45 lead spare, So use the one that the routers got
plugged into.

It the lead that plugs into your current computer network card to the broadband box.

Now we need to setup your computer to talk to the dbox via ftp

On your computer press the following (windows only)

1.Press Start
2.Press my network places
3.Press view network connections
4.Highlight local area connection.
5.Right click select properties.
6.Scroll down to tcp/ip
7.press enter.
8.Select the use the following ip.
9.Enter ip address 192.168.0.105
10.Enter subnet mask 255.255.255.0
11. Enter default gateway 192.169.254.2

Press ok shuts the window then press ok again shuts all network windows.


using your Image flashing assistant flash you dbox2 with the NEW laky-pro image

when finished flashing turn of the Image flashing assistant

un-plug your box from the mains (then restart)

select English

press blue button

select town (box will re-boot)

scan for channels

done!

ps turn off your firewall

good luck

---

---

ok done this tryed about 10 other ip configurations from other people my box flash ftp says connected logs in hangs for ages trys to download list then times out after about 6 mins of hanging ive got 2 dbox`s 1 with sportster 1 with patino ive tryed this with both and its same thing over and over for the last 3 days any one any ideas ps i did my eurovox by null modem in about 2 mins and the d boxes are 1 chip boxes

---

you must connect your cables directly to the pc and box not through your router

make sure you are using a null-modem cable and a patch/crossover-cable or the image loader wont work

---