|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
karl1974
Junior Member
|
18. April 2008 @ 18:04 |
Link to this message
|
|
Fair play and a big thank you to all who help others on this thread , without their knowledge the vast majority would be lost Oggnogg , Scoopdog , Bryandir , Turner123 and all others.......
|
|
Advertisement
|
 |
|
|
Junior Member
|
18. April 2008 @ 18:04 |
Link to this message
|
Originally posted by prasiet:
Originally posted by Scoopdog:
Originally posted by zappp64:
Originally posted by stewson:
hello to all iv been reading this thread all week and tryed to follow advice without asking what to do as many ppl seem to ask the same questions, well i could nt get my box going so i searched around more well i found a chap who could help me and he did, he sorted my boxes out for me yesterday and they are fine im so happy he did it as id never have got it going i found him here if your the same as me then go to this link it could be just what you need
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...8693873
dont pay for it, what he is offering is availble free.
i find a lot of people find the terms and language off-putting like nagraroms,ifa, crossover ethernet leads etc. and when you actually look into it your doing a basic file transfer from your pc to a box, thats all it is no great mystery i find that all the info you need for "any box" is on bigmaq and with people involved so get reading
http://www.4shared.com/dir/4221132/a307c346/sharing.html
here's a link i have for a d box guide messing with this stuff is not easy but a bit of a challenge
exactly.
thing is that people will pay for free info
just read the previous posts and the anwsers are there
|
Junior Member
|
18. April 2008 @ 18:08 |
Link to this message
|
Originally posted by karl1974:
Fair play and a big thank you to all who help others on this thread , without their knowledge the vast majority would be lost Oggnogg , Scoopdog , Bryandir , Turner123 and all others.......
cheers karl we can all help each other by not paying some scrounger to fix a DVB which we can all do our selves :):):):):):)[img][/img]
|
|
daguvnor
Newbie
|
18. April 2008 @ 19:33 |
Link to this message
|
Don't know whether this is the right forum or not but here goes: Just flashed the new Laky-pro-1 image to my dbox,everything is fine except i have no Bouquet editor just "organizing channels".Also when i link the dbox to my pc using either IE or cuteftp i cannot see any folders so therefore can't import Bouquet.xml or services.xml.
Any help would be appreciated. Thanks
|
|
daguvnor
Newbie
|
18. April 2008 @ 19:54 |
Link to this message
|
Ooops, i got into the folders using Flashfxp...but i need to know now which folder to install Bouquets to.Also where can i find Bouquets for the Teesside area ?
|
|
buggu
Junior Member
|
18. April 2008 @ 22:44 |
Link to this message
|
Originally posted by daguvnor:
Ooops, i got into the folders using Flashfxp...but i need to know now which folder to install Bouquets to.Also where can i find Bouquets for the Teesside area ?
The bouquets are installed in: /VAR/TUXBOX/CONFIG/ZAPIT/.
You problably mean service file for teeside. Maybe someone else could help you or you could try scanning.
|
|
billie22
Junior Member
|
19. April 2008 @ 05:50 |
Link to this message
|
Hi I have read back I cannot find the answer to the question below,I need someone to tell me where to start, PLEASE READ BELOW AND TELL ME WHERE TO START
Originally posted by billie22:
can someone PLEASE tell me is this box in debug or Kein mode because I don't know! When I start my set up the LCD screen has nothing on it,the TV reads Herzlich Willkommen when I translate means Cordially welcomes,I can do nothing with the remote (is this box in debug or Kein mode) Please help so I know where to start Debug or flash or what else it is I do????
Billie22
|
|
turner123
Suspended permanently
|
19. April 2008 @ 05:53 |
Link to this message
|
Originally posted by billie22:
Hi I have read back I cannot find the answer to the question below,I need someone to tell me where to start, PLEASE READ BELOW AND TELL ME WHERE TO START
Originally posted by billie22:
can someone PLEASE tell me is this box in debug or Kein mode because I don't know! When I start my set up the LCD screen has nothing on it,the TV reads Herzlich Willkommen when I translate means Cordially welcomes,I can do nothing with the remote (is this box in debug or Kein mode) Please help so I know where to start Debug or flash or what else it is I do????
its not in debug thats the original german startup
|
|
billie22
Junior Member
|
19. April 2008 @ 06:07 |
Link to this message
|
THANK YOU Quote:
turner123
This means I need to try to debug it I dont know if I can but at least I know where to start from to try to fix it!THANK YOU
Originally posted by turner123:
Originally posted by billie22:
Hi I have read back I cannot find the answer to the question below,I need someone to tell me where to start, PLEASE READ BELOW AND TELL ME WHERE TO START
Originally posted by billie22:
can someone PLEASE tell me is this box in debug or Kein mode because I don't know! When I start my set up the LCD screen has nothing on it,the TV reads Herzlich Willkommen when I translate means Cordially welcomes,I can do nothing with the remote (is this box in debug or Kein mode) Please help so I know where to start Debug or flash or what else it is I do????
its not in debug thats the original german startup
Billie22
|
|
turner123
Suspended permanently
|
19. April 2008 @ 06:10 |
Link to this message
|
Originally posted by billie22:
THANK YOU Quote:
turner123
This means I need to try to debug it I dont know if I can but at least I know where to start from to try to fix it!THANK YOU
Originally posted by turner123:
Originally posted by billie22:
Hi I have read back I cannot find the answer to the question below,I need someone to tell me where to start, PLEASE READ BELOW AND TELL ME WHERE TO START
Originally posted by billie22:
can someone PLEASE tell me is this box in debug or Kein mode because I don't know! When I start my set up the LCD screen has nothing on it,the TV reads Herzlich Willkommen when I translate means Cordially welcomes,I can do nothing with the remote (is this box in debug or Kein mode) Please help so I know where to start Debug or flash or what else it is I do????
its not in debug thats the original german startup
i did have a pdf showing the original screen when not in debug but the words you said above klicked and i remembered what id read ill try and locate it again,do you get a picture on the tv screen ?
|
|
turner123
Suspended permanently
|
19. April 2008 @ 06:11 |
Link to this message
|
Debug mode without Short-circuit HowTo
General information
On parts to the software mentioned here there is copyright of Sun, and/or Betaresearch. Making it available to download, and/or other spreading of this software (BR image or files from it) is forbidden.
Everything you do with your Box happens on own danger.
I do not take over any adhesion for any damage.
Needed implements:
A functioning NIC in the PC, a serial zero-modem, the Dbox2-Bootmanager and a file named minflsh.tar.gz.
This minflsh is unfortunately not freely available, since it receives files on those rights from Sun, and/or are appropriate from Betaresearch, for this reason we cannot make it available for download, and/or pass.
Please do not ask us.
Preparations:
Respects first that you your network map a firm IP assigned (autom. ones to refer out). If you do not know wich, simply follow this example:
IP address: 192.168.5.3
Subnet MASK: 255.255.255.0
(please use a address from the private sector (192.168.X.X) if you do not exact know what you are doing)
Also pay attention to the Settings of the serial interface in Windows.
Bit per second: 57600
Data bits: 8
Parity: None
Stop bit: 1
River price increase: None
Afterwards possibly a restart of Windows is necessary.
Unpacked then minflsh archives, best after C:\minflsh.
Now you need the current tuner.so , in flash.so rename and thus the existing flash.so in C:\minflsh\root\platform\drv replace.
The procedure:
With a Sagem with 1xIntel-Flash breaking of the update off is unnecessary, likewise if a BR version lower than 1.6 is installed on the box.
With such a box you can continue with the boot procedure.
At first you have to start an update of the BR-Software.
In addition there are several possibilities:
Normal update:
Go to Dbox internal (Dbox-Button) - > Settings, there is a point software updates.
If the Software tells you, you have allready the current version of the operating system installed, then you have to choose one of the other possibilities.
Card exchange:
Simply start the box with the "wrong" smartcard (cable - Sat).
Afterwards you can start the update.
flash erase
If you have no way to use another card (neighbour etc.), then you can do a "flash erase".
Move the box to deep-standy (or plug off), wait until "Start..." appears in the LCD and then press the arrow-down key at the Dbox until "flash erase" appears in the LCD. Do this twice (the start-assistent should not appear during this procedure), then there should appear a message in the LCD:
"Ihre Software konnte nicht ordnungs.....Drücken Sie OK um die Software zu akutalisieren."
At this point, press OK on the remote.
This method functioned usually on the first time, one does not have to usually repeat the procedure few times.
Antenna mark out.
Plug the antenna off an then start the box. The error message UD4 will appear in the LCD.
Do not press OK, simply plug off the box.
The plug the antenna in and start the box.
The box should introduce now a software update.
When the update runs:
Control LCD. There have to be 1-4 bars, (not the fast passing bars while loading..., but itself slowly of on the left of developing bars of the software update. With BN2.1 premiere there is in the LCD at this time)
Then plug off the box.
Plug off the antenna, some boxes do notanswer to RSH if the antenna is connected.
Now the box should start from minflsh and open RSH.
The boot procedure:
Then start the Dbox2-Bootmanager.
As Dbox2-IP take an IP address, the network fits on (if you followed my example take 192.168.5.7).
Rarp-Server starten: Ein
BootP/TftP-Server starten: Ein
Bootfile für die Dbox: C:\minflsh\kernel\os
NFS-Server starten: Ein
Root-Verzeichnis: C:\minflsh
Com-Port: Öffnen
Verbindungsgeschwindigkeit: 57600
Now press on Start and plug in the box.
Now the LCD should stop while lade....
Wait a little while, it can last up to 30secs till RSH works.
Change to the rider "RSH Client" and send help with the Send Cmd Button.
Afterwards following messages appear:
> help
ChorusOS r3 rsh daemon - valid COMMANDS are:
mount [ hostaddr:filesystem|special file [ mount point ] ]
umount [ - v|F|f|A|t [ UF|NFS ] ] [ special file ]
swapon mount point
and still some other lines.
If that does not happen and something of "timeout" comes instead,try breaking the update at another point (possibly with 5-9 bars)
Disabling write-protection
Now you have to disable the write-protection, the way to do differs from box to box. See in addition also: that HowTo
For boxes with 2 x Intel flash there is a new method, which develop that the plate makes redundant: Only briefly, (1 second) connect GND (its under the fixing bolts) with Pin12 of one flash-chip. You have to count for Pin12, Pin1 is a marked (thick point) in the appropriate corner of the Flash.
With the Sagem 1xI as well as with the 2xAMD boxes this method does not function unfortunately.
Enabling the Debug-Mode
If the necessary bridge is set, you execute the Script "enable_debug_mit_minflsh.txt" with the "Execute Script" Button of the boot manager.
After this a few lines and many error messages appears. That is normal. > umount /
> mount 192.168.5.3:C/minflsh/ /
C_INIT: mount 192.168.5.3:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
started aid = 10
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/nokia-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 58 sec, 920000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 62 sec, 820000000 nsec
INIT: afexec of upgrade failed - No such file or directory
At this point, the Network seems to be ok.
Now take a look at the com-terminal. If there is:
DebugEnabler (C) tmbinc, gillem +(sagem, amd, philips) 1,8 beta
bl-version: 1.0
product? at: 10000944
current state: tmb locked
flashrom type: 2x16 bit? yes. vendor: INTEL
unprotecting:
flashing NOW: DONE!
then everything is correct.
The exact expenditures are different from box to box, the last line is the important one. If there is flashing NOW: failed, you did not successfully disable the write-protection. If there is nothing, control the settings of the serial port and the zero-modem.
So, if everything suceeded, you ar now in the Debug mode.
Now plug off the box and remove all the bridges of the write-protection.
Turn off the bootmanager(Stop).
Now turn on the box, in the LCD will come many merry indications (BMon....etc.).
That is correct, this are the expenditures of the Debug mode.
After the debug-mode is enabled
Let the BR-Software do its update to the end.
Make sure that it still works correctly.
If is settled, read your Flash contents with the "Image auslesen" Button of the boot manager.
When allways the message nochmal, nochmal... is in the com-terminal, you can use this Tool.
If the image is successfully picked out, extract the ucodes with the "Dateien extrahieren" Button of the boot manager.
That's it. The box is in the Debug mode and the necessary files is secured. Now can start you a Yadd or flash a Linux Image, e.g. from the update side
|
|
billie22
Junior Member
|
19. April 2008 @ 06:30 |
Link to this message
|
|
sorry can I ask one other thing? how do I start do I have the DBox connected to the cable input? and connected to the TV? then connect both to the PC? what do I use to connect to PC I have both null modem and crossover?
Billie22
|
|
smoggy
Suspended due to non-functional email address
|
19. April 2008 @ 07:59 |
Link to this message
|
|
Hi everybody, this is ti thanks fir all the help I have received, my box is up and working again, thanks to evrybody, take care,
Gordon
BORO-North East's Finest
|
|
trikytrix
Junior Member
|
19. April 2008 @ 08:22 |
Link to this message
|
Originally posted by heike:
HOPE THIS HELPS
i have flashed four dbox2 boxes today so here is how to
you will need
laky-pro 1(from BIGMAQ tool-bar)
Image flashing assistant (GOOGLE)
null-modem cable how do i get image flashing assistant and laky pro 1?
patch/crossover-cable
Now we need to setup the dbox to use ftp easily via your existing patch/crossover-cable.
1.Get your dbox remote in your hand press dbox.
2.Select the settings menu press ok.
3.Select network then press ok.
4.Change ip address to 192.168.0.100
5.Change subnet mask to 255.255.255.0
6.change default gateway to 192.168.254.2
7.Save all setting press the home button.
Now plug your patch/crossover-cable into the back off the dbox.
Some off you might not have a rj45 lead spare, So use the one that the routers got
plugged into.
It the lead that plugs into your current computer network card to the broadband box.
Now we need to setup your computer to talk to the dbox via ftp
On your computer press the following (windows only)
1.Press Start
2.Press my network places
3.Press view network connections
4.Highlight local area connection.
5.Right click select properties.
6.Scroll down to tcp/ip
7.press enter.
8.Select the use the following ip.
9.Enter ip address 192.168.0.105
10.Enter subnet mask 255.255.255.0
11. Enter default gateway 192.169.254.2
Press ok shuts the window then press ok again shuts all network windows.
using your Image flashing assistant flash you dbox2 with the NEW laky-pro image
when finished flashing turn of the Image flashing assistant
un-plug your box from the mains (then restart)
select English
press blue button
select town (box will re-boot)
scan for channels
done!
ps turn off your firewall
good luck
|
|
stewson
Suspended permanently
|
19. April 2008 @ 09:21 |
Link to this message
|
|
i got alot mixed feelings cause i got someone to do my box for me i had no chance in hell doing it so i did not mind how i got it sorted as long as it is on now im happy
This message has been edited since posting. Last time this message was edited on 21. April 2008 @ 16:48
|
|
jpw1956
Suspended due to non-functional email address
|
19. April 2008 @ 09:32 |
Link to this message
|
Hi Everyone
I have a Sagem DBOX which has lost most of the channels again.
A week ago I managed to get it working by entering the new code into Tuxbox settings. It worked great for a few days but the shows a blank screen for any of the non terrestrial channels. (still shows program details).
Does anyone know what I need to do this time to restore the missing channels? Is there a newer code or is there more to it? Do I need to connect it to my PC if so where do I get the required files etc??
I realise that this may have been already answered.. but I have trawled through the forums but I'm unsure which information applies to me. Connected to v1rgin in midlands area.
DBOX start up info...
-------------------------------
Image Name - dbox2
Base image version - 2.0
UK translation - cryongenic
UK Cable Coding - Cydine
Provider & Version - Sportstar 1.7 uk04
--------------------------------
|
|
turner123
Suspended permanently
|
19. April 2008 @ 10:33 |
Link to this message
|
Originally posted by billie22:
sorry can I ask one other thing? how do I start do I have the DBox connected to the cable input? and connected to the TV? then connect both to the PC? what do I use to connect to PC I have both null modem and crossover?
Debug Mode?
I said earlier, we need to replace the original Betanova soft by Linux, that way the Dbox2 will be allowed to run ?unsigned? software (ie: check the Graphical User Interfaces later on). In order to do this, we need to put the Dbox2 in Debug Mode. This only needs to be done ONCE.
First let?s check if your box is not already in Debug Mode.
For this we need to apply power and to turn the dbox2 ON. (Also connect the SCART cable, no need for the feed yet).
If you can see a picture similar to that one the TV then you still have the original software -> it?s very unlikely that your Dbox2 is in Debug Mode.
If you can see the following LCD logos then you are already in Debug Mode.
The BEST website about how to put your Dbox2 into Debug Mode is http://www.dietmar-h.net/
Go there and put your Dbox2 in Debug Mode, there is 3 different ways of doing that:
-Short Circuit method -broken BR -new MHC method
For the tutorial on putting your Dbox2 into Debug Mode, you will need to find out which BMON version you have, switch the box on while holding the UP button. A number will come up similar to
01DD10081 161608
Explanation:
01 : mID (here Nokia) Dd : feID (front-end)
10 : Bmon version (here v1.0; if 12 then you have v1.2)
081 : FPrev. Software revision of the front processor (with Bmon 1,0 as SWRev designates)
16 : Internal RAM (here 16MB)
16 : External RAM (here 16MB)
08 : Flash Memory (here 8MB)
|
|
karl1974
Junior Member
|
19. April 2008 @ 11:19 |
Link to this message
|
Any help to get this box going before the game would be great.OK i've flashed the box with the Andromeda image from Oggnogg , transfered the naggrarom 7,10 and 11 into my keys folder done a reboot.Durning the channel scan it's finding 56TV , 29Radio , 9Data and when the scan is finished i get an error no channels were found.
|
|
kewlguy98
Junior Member
|
19. April 2008 @ 11:30 |
Link to this message
|
Originally posted by trikytrix:
Originally posted by heike:
HOPE THIS HELPS
i have flashed four dbox2 boxes today so here is how to
you will need
laky-pro 1(from BIGMAQ tool-bar)
Image flashing assistant (GOOGLE)
null-modem cable how do i get image flashing assistant and laky pro 1?
patch/crossover-cable
Now we need to setup the dbox to use ftp easily via your existing patch/crossover-cable.
1.Get your dbox remote in your hand press dbox.
2.Select the settings menu press ok.
3.Select network then press ok.
4.Change ip address to 192.168.0.100
5.Change subnet mask to 255.255.255.0
6.change default gateway to 192.168.254.2
7.Save all setting press the home button.
Now plug your patch/crossover-cable into the back off the dbox.
Some off you might not have a rj45 lead spare, So use the one that the routers got
plugged into.
It the lead that plugs into your current computer network card to the broadband box.
Now we need to setup your computer to talk to the dbox via ftp
On your computer press the following (windows only)
1.Press Start
2.Press my network places
3.Press view network connections
4.Highlight local area connection.
5.Right click select properties.
6.Scroll down to tcp/ip
7.press enter.
8.Select the use the following ip.
9.Enter ip address 192.168.0.105
10.Enter subnet mask 255.255.255.0
11. Enter default gateway 192.169.254.2
Press ok shuts the window then press ok again shuts all network windows.
using your Image flashing assistant flash you dbox2 with the NEW laky-pro image
when finished flashing turn of the Image flashing assistant
un-plug your box from the mains (then restart)
select English
press blue button
select town (box will re-boot)
scan for channels
done!
ps turn off your firewall
good luck
ok done this tryed about 10 other ip configurations from other people my box flash ftp says connected logs in hangs for ages trys to download list then times out after about 6 mins of hanging ive got 2 dbox`s 1 with sportster 1 with patino ive tryed this with both and its same thing over and over for the last 3 days any one any ideas ps i did my eurovox by null modem in about 2 mins and the d boxes are 1 chip boxes
|
|
kewlguy98
Junior Member
|
19. April 2008 @ 11:35 |
Link to this message
|
|
sry i should have said im trying to upload the au fix not overwrite software th laky pro is listed for 2chip boxes will it work on 1 chip boxes?
|
|
caz4rob
Newbie
|
19. April 2008 @ 11:41 |
Link to this message
|
Originally posted by delooney:
Just need a couple of questions answering.... i have looked everywhere for these too!!
1. I've moved in to a brand new building and they already have a Telewest satellite point on the walls, do i have to actually ring up TW and subscribe to their tv service to then allow my DBOX2 to get the channels, or should the DBOX be able get the channels without the subscription. (i hope that all makes sense!)
2. What is the latest version of the image for the NOKIA DBOX2 (2x) Telewest London (UK) Neutrino. And where's the best place to get this? is it (modshack??)
3. Where can i find in the DBOX2 menus which version of which image is on my NOKIA DBOX2?
4. Any info on being a Mac user from anyone? tips? software? hints? etc? anything? VLC setup/settings?
Many Thanks in advance guys
delooney
|
|
turner123
Suspended permanently
|
19. April 2008 @ 11:44 |
Link to this message
|
Originally posted by kewlguy98:
sry i should have said im trying to upload the au fix not overwrite software th laky pro is listed for 2chip boxes will it work on 1 chip boxes?
NO YOU WILL PUT YOUR BOX INTO KEIN SYSTEM IF YOU PUT A 2X ON A 1X
|
|
kewlguy98
Junior Member
|
19. April 2008 @ 11:46 |
Link to this message
|
|
turner123
any idea why i cant get a stade network connection ?
|
|
sydati
Suspended due to non-functional email address
|
19. April 2008 @ 11:47 |
Link to this message
|
dbox 2 - I did all that using cute ftp and put keys in from PC was working day before. The next day channels are blank. I have inputted new keys today from bigmaq toolbar manually via remote. Rebooted nothing happenend. Im scanning now and Scan Transponder is highlighted in brown and then say error in channel not found all highlighted in brown. Somethings not right. Will i have to change keys every day. And through cute ftp all the time. Please shed some light.
|
|
Advertisement
|
|
|
|
turner123
Suspended permanently
|
19. April 2008 @ 11:49 |
Link to this message
|
Originally posted by kewlguy98:
turner123
any idea why i cant get a stade network connection ?
if you have a wireless device and you are connetced to it then your opening the ftp you will struggle disconnet from any other network ie disable them all except for the on you are using for ftp try that or anti virus maybe preventing you too
|
