Originally posted by sc0user:

---

It is here on AD http://forums.afterdawn.com/thread_view.cfm/559483 also this has been released by the manufacturers and is on all forums.

---

Originally posted by barm:

---

Originally posted by chris2404:

---

Hi, I have the black eurovox max V 2008 box and it has stopped working. I was flicking through the stations and a message came up saying the box has developed a fault, contact your supplier and then shut off. I cant do anything with the box and all that happens is two green lights appear on the front of the box when plugged in. This is the second box in a month to do this to me! I dont believe I have a clone. I have been looking around and a number of people seem to have had the same problem but nobody has a solution...anybody here got any ideas????

---

Happened to me Saturday night as well :( damn, sending it back to my supplier today

Originally posted by Messy11:

---

Folks,

I have a Eurovox Max and tried to update my channels to try and get Bravo+ and Living+ back last night but obviously did something wrong and have lost the signal for all the channels now !! Can anyone provide a fool proof way (step by step guide) of getting them back. I am with N*L any help would be really appreciated.

---

Originally posted by Celtic71:

---

If you want to update the new firmwa*e you dont need the null modem cable , the loader is built into it so when you click the middle download button it puts the file on without you havening to browse for it

---

Originally posted by yayamark:

---

Originally posted by Celtic71:

---

If you want to update the new firmwa*e you dont need the null modem cable , the loader is built into it so when you click the middle download button it puts the file on without you havening to browse for it

---

i really dont understand that at all do i have to plug my box into my laptop?

---

Originally posted by blue2006:

---

Hi

I am having troubles to get a eurovox max red 2007 to work with choxxs.
I have downloaded the may firmware, reset to factory settings, scan at 6875, added chorus frequency manually and auto scan no joy.Power scan no joy. I have choxxs cable.The quality signal is around5.I had another eurovox ( it just died ) and it was working fine.
Any ideas?

---

Originally posted by blue2006:

---

Yes it is. ( it goes from 2% to 5%)
If I do a power scan, the signal is 90% and quality from 2 to 5.If I unplug the cable it is still signal 90%.

---

Originally posted by Bingbooth:

---

Hi Forum

can anyone help - I bought the 2008 Eurovox MAX and live in Swords and have CH***S cable. I have performed a power scan, all the channels are tuned in but i only have 4 of them unscrambled. I get a message of 'System Unknown' on all the other channels.

Do i need nagravision codes - can anyone explain where i can get these and how i input them?

thanks in advance

---

Originally posted by sc0user:

---

Originally posted by blue2006:

---

Yes it is. ( it goes from 2% to 5%)
If I do a power scan, the signal is 90% and quality from 2 to 5.If I unplug the cable it is still signal 90%.

---

You are sure you have a live true cable feed. Please also connect the Eurovox directly into the incoming feed when updating the frequencies, take away any splitters.

Ch**** Frequencies

363.000 works 371.000 works
355.500 works 347.000 works
339.500 works 386.000 works
347.500 works 394.000 works
419.000 works 410.000 works
322.000 works 347.500 works
314.000 426.000


To add these frequencies you need to
1.Go to installation
2.Press green button for ch edit
3.Press red button add channel
4.Enter frequency and symbol rate 6875
5.Press ok, then repeat these steps till all freqs added. When they're all in press exit and go back to first page of install menu. Press the red button for auto scan. This will do a scan an all the frequencies entered and should hopefully give you 138 TV channels and the rest are radio.

---