|
Eurovox max security
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 10:30 |
Link to this message
|
|
Hi Sc0user.tried wot u said with symbol rate in second box and start and end freqs and nothing.i have the direct feed into rf socket also
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
19. February 2008 @ 10:34 |
Link to this message
|
|
What does it say on the TV screen?
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 10:34 |
Link to this message
|
|
also forgot to mention..its also sayin no transponder to scan if it try update
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 10:40 |
Link to this message
|
|
where there should be a list of channel freqs and symbol rate and modulator are all blank its not finding any channels when i try a power scan and its sayin no transponder to scan
|
AfterDawn Addict
|
19. February 2008 @ 10:46 |
Link to this message
|
Are you definitely plugged into the RF In socket on the back of the box when you are doing the powerscan?
Do me a favour and plug the coax directly into the back of the TV and tell me if you get any channels that way?
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 10:51 |
Link to this message
|
yeah its defo in the rf socket and i can get about 13 channels through the coax..does it make any difference that i have another box a starview in me dads room and had a splitter in the maxv box with coax and the direct feed??but..they worked fine before like that and the other box is still workin fine now!!
|
AfterDawn Addict
|
19. February 2008 @ 10:57 |
Link to this message
|
Just for now try a powerscan from the direct feed, (where your cable enters the house), with the Eurovox, take away any splitters.
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 10:59 |
Link to this message
|
tats wot i did just direct into the box.removed the splitter and left coax out of tv
|
AfterDawn Addict
|
19. February 2008 @ 11:09 |
Link to this message
|
OK just to reiterate this is what you have done?
Press menu, config,clear data, clear channel data, press OK. If it asks for a pin use 1004. Then go to installation,user installation, press yellow button, powerscan screen will appear. For N**, you need to add 6887 in second symbol rate. Input start frequency at 290.000 and end frequency at 403.000. Press OK to start scan. When scan is complete, press menu, installation, user installation. Press red button to update channels, screen will go blank for a minute and will then load channels.
It is important that you perform this from your direct feed, where the N** cable enters your house directly into the RF IN socket on the back of the Eurovox.
This will work unless your tuner has become faulty or your RF in socket has developed a fault, try it from the cable loop out socket to verify if that is the case.
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 11:28 |
Link to this message
|
|
i think ive done a factory default by accident..shit.its asking for timer settings when i go to installation
|
AfterDawn Addict
|
19. February 2008 @ 11:35 |
Link to this message
|
|
Just unplug it and go through the set up above again.
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 11:37 |
Link to this message
|
|
i prob doing ur head in m8 soz ill try and fingers crossed
|
AfterDawn Addict
|
19. February 2008 @ 11:47 |
Link to this message
|
|
Not a problem take your time.
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 12:02 |
Link to this message
|
|
ok did th and got only 10 channels and when i try view thm its sayin no signal then searching for signal..then updating code and back to no signal again
|
AfterDawn Addict
|
19. February 2008 @ 12:05 |
Link to this message
|
|
OK press menu, installation and user installation. You should see 13 TPs in there, tell me what it says roughly for each TPs signal level/quality.
Also press menu, config and system info and post what that says also.
This message has been edited since posting. Last time this message was edited on 19. February 2008 @ 12:06
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 12:18 |
Link to this message
|
|
newbie Q..wot are tp's??
|
AfterDawn Addict
|
19. February 2008 @ 12:21 |
Link to this message
|
|
Transponders, (frequencies channels are broadcast on).
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 12:34 |
Link to this message
|
|
its only showing 1 TP on freq 402.00 the level and quality chanes but roughly the lvl is 24% but all of a sudden goes up to 85% then bac dow and the same for quality 27% up to 85% then bac don again and the sys details are as follows...
Model:DVB-XC BoxV TDA
S/W Ver:1.0 STC4 Oct 15 2007
H/W Ver:2.0 K5
Bootstrap:v0001
S/W Build:Kuro
|
AfterDawn Addict
|
19. February 2008 @ 12:43 |
Link to this message
|
Could be a number of problems, tuner or C14 capacitor on its way out. You could try to reflash it with the latest firmware which is one revision above yours and see if that helps or just send it back for a replacement as it is still under warranty as you bought it less than a year ago. BTW its a Eurovox Max V that you have.
Sorry I am leaving soon off to watch the match, I will be here for the next ten minutes or so if you need more info.
|
|
Skorezeny
Junior Member
|
19. February 2008 @ 12:46 |
Link to this message
|
|
no probs man thx for ur help much appreciated.they only thing is i didnt buy it of the net..my bro got it in a pub he worked in so maybe i'll get him to bring it back and see if he changes it maybe..any thx again :)
|
AfterDawn Addict
|
19. February 2008 @ 12:51 |
Link to this message
|
|
Say that will be a big maybe but you never know. If he fails to replace it for you come back and we may be able to get it going here ;)
|
Junior Member
|
19. February 2008 @ 13:16 |
Link to this message
|
Originally posted by tombull82:
Finally got a bit of time to sit down and sort out the EV Max 2008.
These are the best TP Freq's for Carlow Town On Cable Digital that I could find.
I have manually scanned my way from ~270 to 500 Mhz and this is the results I have come up with.
These Freq's have all come in with perfect Signal for me. 80+ % and no jumping.
I've hit 12 TP's, Sc0ucer reckons there will be upto 13 TP's so I will keep looking for this. In the mean time if anyone has Digital Cable in Carlow Can you let me know if you are getting some Channels that I have not got mentioned below as I have not upgraded to Digital yet (still only on analogue connection) so I dont have a Cable supplier decoder to compare against.
315.000Mhz
RTE 1
RTE 2
TV 3
TG 4
Euro Sport
341.000Mhz
BBC 1
BBC 2
UTV
CH 4
347.000Mhz
Cartoon Network
CNN
Boomerang
Sky Sport News
Ch 6
Setanta Sport 1
357.000Mhz
MTV
National Geographic
Trouble TV
Sky Action
Sky Sport 3
Sky Premier
UKTV Gold
At The Races
364.000Mhz
Sky News
Discovery
Discovery Real Time
Sky Sport 1
Sky Sport 2
Sky Comedy
Sky 1
373.000Mhz
E4
Biography Channel
History Channel
Bravo
More 4
UKTV Style
Playboy
PPV Channel
389.000Mhz
Discovery Knowledge
MTV Dance
Travel & Leisure
Nick Toons
Paramount 2
MTV 2
397.000Mhz
Buzz TV
MTV R +1
Discovery Turbo
VH1 Classic
410.000Mhz
Sky Family
Sky Drama
MGM Movies
Sky Sport X
TCM
Living TV
VH1
418.000Mhz
Sky Sci Fi
Sky Classic
Sky Indie
Sky Modern
Film 4
Bloomberg
The Box
UK Docs
426.000Mhz
CBBC1
Cbeebies
BBC News 24
Setanta Golf
BBC 3
BBC 4
444.000Mhz
Sky 2
E!
EWTN
MTV Hits
Nick Jnr
Setanta Sport
Setanta Sport 2
323.000Mhz
Setanta Ireland
Disney Channel
Special Event
Paramount
Animal Plannet
QVC
Nickelodeon
Hope these come in handy for someone!!
Tom
Forgot to Mention!! Symbol Rate of 6875
Well lads picked up a box's for a few friend's and while tuning them in a came we across my 13th TP that I could'nt find at home in my house. Was hoping not to have to bother to change the splitter in the attic but looks like I may as in my house TP 323.000Mhz comes in very blocky due to this I'd say.
Anyway I've added to the list above.
This message has been edited since posting. Last time this message was edited on 19. February 2008 @ 13:18
|
|
dobson
Newbie
|
19. February 2008 @ 14:42 |
Link to this message
|
|
scOuser,it says the following onthesysteminfo.
Model-Dubxc box v TDA
s/w 1.0 stc4 oct 29 2009
h/wver 2.0 tks
Bootstrap v001
s/w build kvro
Its a box v that i have, i tried a couple of power scans earlier this evening, found all the chanels no prob, its just that they keep breaking up when i go to view,(something that might happen to my marriage if i dont get it sorted).They are ok for a few mins then the screen starts to freese up and i get no signal / code being updatedon the screen, I got this box from a friend of a friend so have no comeback.
Enjoy the game.
|
Member
|
19. February 2008 @ 17:18 |
Link to this message
|
Originally posted by dobson:
scOuser,it says the following onthesysteminfo.
Model-Dubxc box v TDA
s/w 1.0 stc4 oct 29 2009
h/wver 2.0 tks
Bootstrap v001
s/w build kvro
Its a box v that i have, i tried a couple of power scans earlier this evening, found all the chanels no prob, its just that they keep breaking up when i go to view,(something that might happen to my marriage if i dont get it sorted).They are ok for a few mins then the screen starts to freese up and i get no signal / code being updatedon the screen, I got this box from a friend of a friend so have no comeback.
Enjoy the game.
Bought 3 eurovox for friends in january.1 of them was giving the same symptoms as your box.The supplier replaced the box and said
that they had other complaints recently with signal fluctuating
between 87% to as low as 10%.He also said he was on to the manufacturers and hoped the issue was now resolved.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
19. February 2008 @ 17:40 |
Link to this message
|
|
DID yous win sc0user,did yous win ?????
|
