|
Post your DISC quality scans here 2
|
|
AfterDawn Addict
|
19. November 2008 @ 11:22 |
Link to this message
|
|
hobbit thanks for informing us about that "error". I use the 1.06bt f/w but was told the 1.Z2 f/w is pretty good. I didn't realize the 1.Z3 f/w had issues. Thank goodness for other smarter members. :)
....gm
|
|
Advertisement
|
|
|
|
Senior Member
|
19. November 2008 @ 12:23 |
Link to this message
|
Here's the linky where Dee says she found an error. Doesn't say what the error affects in particular.
I misspoke earlier, Dee says if you are going to burn at 16x or above, revert back to the 1.Z2. Maybe the error in the firmware is just for burning faster than 16x?
I went back to 1.Z2 myself, though I didn't encounter any issues with 1.Z3 for the short time I used it.
on a different note, I might have to pick up a 7200A and see if I can shoehorn it into my external litey enclosure. My external doesn't like some of my DLs that I use.
|
AfterDawn Addict
7 product reviews
|
19. November 2008 @ 13:22 |
Link to this message
|
|
THANK YOU SOOOO MUCH. I figured there would be modified f/w somewhere. Would that void my warranty. I guess I shouldnt care too much though. 30$ really isnt that much.
To delete, or not to delete. THAT is the question! |
Senior Member
|
19. November 2008 @ 13:36 |
Link to this message
|
|
Yes it does void your warranty. There is a disclaimer.
|
AfterDawn Addict
7 product reviews
|
19. November 2008 @ 13:54 |
Link to this message
|
|
ahhh... but could I roll back to the original f/w or simply hold on to one of their future upgrades? Oh... and should I worry about my opti's buffer? It hangs around 95% Fluctuates alot more than my other drives.
To delete, or not to delete. THAT is the question! |
Senior Member
|
19. November 2008 @ 14:03 |
Link to this message
|
|
Senior Member
|
19. November 2008 @ 14:18 |
Link to this message
|
@ o-man7
I think the flashing tool does have the capability to "back up" your corrent firmware, but I don't know if there are traces left behind after a flash.
My buffer also fluctuates, more so than my other drives. There has been discussion about it and I remember that Cincyrob was involved. Maybe he can shed some more light on that subject.
|
AfterDawn Addict
7 product reviews
|
19. November 2008 @ 14:24 |
Link to this message
|
Appreciate your quick feedback, THANKS. I wouldnt think that future firmware releases would void the warranty. But I know what you mean by leaving traces, ;) With sony, I wouldnt doubt it for a minute.
To delete, or not to delete. THAT is the question! |
Senior Member
|
19. November 2008 @ 15:30 |
Link to this message
|
@Omegaman7,
Remember you can flash back to an older version of your firmware, unless the drive dies completely that is. I have cross-flashed a Sony DRU-800A to a Lite-on 1693S custom firmware which works better than either the Sony or the Lite-On firmwares out there. Experiment to see which one gives better results for you.
|
Senior Member
|
19. November 2008 @ 23:08 |
Link to this message
|
|
AfterDawn Addict
7 product reviews
|
21. November 2008 @ 02:01 |
Link to this message
|
Heres a scan of a TDK CMC dvd+r. I bought these (100PK) from costco for 20 bucks about a yr ago. The first printables I thought I would give a shot. I dont shy from verbs and ty's now :D I must admit though. For cmc and an obvious dru820 burn, its not a bad scan to me! See... my 820 (no longer employed) produced discs that scan much like this. An escalation of both pie and pif. Was a very faithful burner though. It saw ALOT ALOT of discs. probably in the neighborhood of 400 burns + rips. And the real kicker is it NEVER had a coaster! It was quite the freak of techonology for a while. Meaning it would read pretty nasty looking discs. Such a shame nothing lasts forever, SIGH
If people dont like me changing the colors let me know. I was simply bored. Only took 3 min too. :D
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
7 product reviews
|
21. November 2008 @ 03:12 |
Link to this message
|
Guess my DRU840 could still be in the game. A scan like this wouldnt surprise me if it were a TY premium. But this was a valueline. Only one itty bitty mark on the shield. Yes, im obsessed. I take a 9LED flashlight (BRIGHT) to discs with blocks in there scans to determine what caused them. 3/5 times, its due to a flake of dust or scuff, etc. This is one of the shiniest, most spotless discs ive ever seen! Average PIE VERY low. :D
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
4 product reviews
|
21. November 2008 @ 08:52 |
Link to this message
|
yes yes yes..and yes
i had the buffer problem big time. it would drop from 100% down to 4%
some say that is normal and not to worry about it. so i took it for what it was... then i found out from some others that if i burn from my hard drive. to have the .iso/video_ts files on a different hard drive than the OS and other programs running. and that made a big difference. so i now have my new WD gp 500gb hdd as a secondary drive with just video and pics on it no programs or anything like that.
omegaman7
that last TY you burnt there is perfect... only 3 incidents of a recordable PIF.cant ask for mush more than that.
i myself for the 7200S i like the 1.06bt F/W i tried the 1.Z2 didnt like it as much as the 1.06bt.. thats just me though.
BlivetNC
that is a sweet lookin scan on the older drive. mine is still kickin out some good burns as well.. but i know the newer DL disc. it cant read.. it needs a F/W update badly for the newer media.
|
|
onya
Suspended permanently
|
21. November 2008 @ 12:55 |
Link to this message
|
Here's everyones all time fav brand from a while ago....
I get shivers just looking at it.
Even though the box is ticked, Jitter still isn't showing up on any scan. Seems like it's always greyed out for whatever reason. Care to help out?
Edit: tdk -r 16x pile o crap ones..lol.
This message has been edited since posting. Last time this message was edited on 21. November 2008 @ 13:19
|
AfterDawn Addict
7 product reviews
|
21. November 2008 @ 13:11 |
Link to this message
|
Pioneers arnt the best readers. From what I hear, BenQ drives, and lite-ons are the drives of both preference, and capability for reading, Pi E and Pi F + Jitter. onya, what kind of disc is that. Oh never mind. I'll google it.
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
21. November 2008 @ 13:35 |
Link to this message
|
@onya
some drives just don't read the jitter. I think the Optiarc NEC 7200 S I have doesn't also or it could be an usb LG I have-one I have doesn't LOL. I know the litey does LH 20A1S
|
|
onya
Suspended permanently
|
21. November 2008 @ 13:51 |
Link to this message
|
@garmoon I thought that Pioneer brand was pretty darn good apart from not booktyping...perhaps they burn just a bit better than they read then lol. This ones getting a bit old, prolly near the four year+ mark I think, she's done lotsa work. :)
Even IF this pioneer was top notch, there's no way that tdk would've turned out any better. I've got another scan (won't bother posting) from around the same time-ish but on a Verb printable, it's messy as hell too. My current batch of verbs seem ok though, an occasional "misfire" doesn't hurt too much. :P
Cheers.
|
AfterDawn Addict
4 product reviews
|
21. November 2008 @ 13:54 |
Link to this message
|
as the good garmooner said. the 7200S or any of the 7200 series dont do jitter. but the liteons do as well as the benQ's. the benQ's will do the jitter as they scan everything else,instead of waiting unitl the end of the scan like the liteons do....
TTH02= made in india media
media tek,sony,pioneer,tdk
made for all these brands plus others.
from what i remember that pioneer 108-109 drives were great burners but lacked in the scanning field
This message has been edited since posting. Last time this message was edited on 21. November 2008 @ 14:00
|
AfterDawn Addict
|
21. November 2008 @ 15:20 |
Link to this message
|
Originally posted by cincyrob:
as the good garmooner said. the 7200S or any of the 7200 series dont do jitter. but the liteons do as well as the benQ's. the benQ's will do the jitter as they scan everything else,instead of waiting unitl the end of the scan like the liteons do....
TTH02= made in india media
media tek,sony,pioneer,tdk
made for all these brands plus others.
from what i remember that pioneer 108-109 drives were great burners but lacked in the scanning field
RedRob answered your question about jitter onya. ;) Pioneers do NOT have the ability to scan jitter. I would see about getting a cheapy Lite-On if you can just for scanning. :) Heck you never know you could get a good burner/reader out if it TOO!! :)
Heck RedRob even got the TTH02 thing too. :) I'll just sit back and watch him do his magic... Little Red magician that he is. :D
....gm
add: onya where do you buy your ODD's? If you're in the market we would love to help you spend your money. That's assuming you are wanting/willing to buy another ODD. :)
|
|
onya
Suspended permanently
|
21. November 2008 @ 16:36 |
Link to this message
|
Quote:
...we would love to help you spend your money.
@gm. You're too kind..lol. This old machine is a 478 socket and it took an age to find a replacement mobo for it. Just not enough scrap bins lying around I guess.. :) The brand Plextor seems to be or had been highly regarded, but this will all have to wait for a complete new system. As I said, this old banana box is due for retirement, and an easy life as a word processor for the ex wife heheheh.
A little off topic I know but, just the other month I saw an X-clio a380 shiny black case in a local window. Feck me those things are massive. My 14 yr old son took a liking to it..but nah, not fer me.
*sorry mods..back on track* :P
|
AfterDawn Addict
|
21. November 2008 @ 16:56 |
Link to this message
|
onya.... you can post OT in here.. lol. (MOD's don't read that....hehehe)
RedRob encourages it. ;)
I have a Gigabyte Aurora 570 and that thing is massive as well. My wife saw it the day I got it and was hoping that I didn't plan on filling it up with computer parts... I told her to late... hehehe.. the plan was already in action.... :D
Still got to add about 3 HDD's to it tho (it only has 1 atm)..... the 4 ODD's in there are a bit lonely. :P
....gm
|
AfterDawn Addict
|
21. November 2008 @ 17:00 |
Link to this message
|
@onya
Watch out for little green men who come into you nightmares and tell you to buy more ODDs. You get addicted and poorer for it. Altho newegg has ODD for the price of a 100 cake box DVD blanks.
|
AfterDawn Addict
|
21. November 2008 @ 17:16 |
Link to this message
|
Originally posted by garmoon:
@onya
Watch out for little green men who come into you nightmares and tell you to buy more ODDs. You get addicted and poorer for it. Altho newegg has ODD for the price of a 100 cake box DVD blanks.
Hi Onya, good to see you! I'm a two and two man! Two ODDs and two HDDs. I don't want or need more and that philosophy is going to banish my Tower for good and allow me to build the AMD I'm looking into that will do everything I do with my present rig better and faster in this case without overclocking!
I'm looking forward to it!
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
|
onya
Suspended permanently
|
21. November 2008 @ 17:51 |
Link to this message
|
|
G'day to you Russ, long time no hear. These boys giving you a rough time with their addictions are they? :) I can see their point though...why have a big case with bugger all in it. LOL. Absolutely criminal. :P
Nice case btw. ;)
Cheers.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
21. November 2008 @ 18:52 |
Link to this message
|
Originally posted by onya:
G'day to you Russ, long time no hear. These boys giving you a rough time with their addictions are they? :) I can see their point though...why have a big case with bugger all in it. LOL. Absolutely criminal. :P
Nice case btw. ;)
Cheers.
Yes the case is nice, but I didn't realize that it only has one external 5.25" bay, so I'm leaning more towards this case. http://www.newegg.com/Product/Product.aspx?Item=N82E16811163066 Install a pair of these Silverstone fans in the rear http://www.newegg.com/Product/Product.aspx?Item=N82E16835220023 and it should run very cool and very quiet at about minimum RPMs.
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
