|
Nero ENCODE PROBLEM
|
|
|
sajjan1
Suspended due to non-functional email address
|
3. September 2009 @ 13:28 |
Link to this message
|
Hi,
Im having problem copying a dvd using re encode of nero. The dvd which i am re encoding is a copy it encodes perfectly, but the problem is it burns 50 percent and the disc comes out with a burn error. The message i get is out of memory could it be it is a copy and there are no other files for it to re encode as on the dvd its the main movie only?
|
|
Advertisement
|
|
|
|
Junior Member
|
4. September 2009 @ 06:17 |
Link to this message
|
Nero will have added a 'start' and 'end' to the image file (ISO) when it encodes so that you should have no blank at the end of the disk like you describe.
The error message makes me think that you don't have enough hard drive space to do the full burn. Try encoding the file with Nero as you have done but save it instead of burning it. You can save it as an image file on the hard drive. Then close Nero and any other progs running and try burning with IMGburn. Its free and uses loads less memory than Nero. You may have to delete some stuff off your hard drive if you still have the problems. How much space is free? You'll need 10Gig for Nero sometimes.
|
|
sajjan1
Suspended due to non-functional email address
|
7. September 2009 @ 06:08 |
Link to this message
|
I have 2.8 gb free on my local disc.
|
|
sajjan1
Suspended due to non-functional email address
|
7. September 2009 @ 06:35 |
Link to this message
|
Now when i try to re encode a dvd the program crashes
|
Junior Member
|
7. September 2009 @ 06:38 |
Link to this message
|
Can you paste the Nero log so that we can have a look at it - it may provide some clues as to the problem.
|
Junior Member
|
7. September 2009 @ 06:39 |
Link to this message
|
Also 2.8GB is not enough for Nero to recode. It can need up to 10 GB depending on what you are doing. This is prob why its crashing
|
|
sajjan1
Suspended due to non-functional email address
|
9. September 2009 @ 07:25 |
Link to this message
|
the space i have on c drive is 21.2 gb.
Still dont know what the problem is?
In nero re encode it takes mins to encode a dvd, and then its not the main movie its just the adverts before the film?
I have never had this problem before
|
|
sajjan1
Suspended due to non-functional email address
|
9. September 2009 @ 08:38 |
Link to this message
|
What i want to do is copy a dvd on to a dvdr,
the best way and quickest way for me to do this was by using nero encode then burning it using nero.
Now it is takeing quite a bit of time, the main movie does not get encoded and sometimes while burning there will be an burn error of some sort.
|
Junior Member
|
9. September 2009 @ 10:16 |
Link to this message
|
If you are trying to back-up a regular shop bought DVD then Nero can't do this - there is copyright protection on it. Use DVD fab to remove the protection and then shrink the size with DVD Shrink (both free) - burn onto a single layer disk then with Nero. There is plenty of help for both DVDfab and DVDShrink here http://forums.afterdawn.com/forum_view.cfm/125
|
|
sajjan1
Suspended due to non-functional email address
|
9. September 2009 @ 13:35 |
Link to this message
|
These dvds are not copy protected as I have copied these before using the same method.
Now when ever i attempt to do something with nero it just freezes and says nero has encountered an error.
|
Junior Member
|
9. September 2009 @ 13:45 |
Link to this message
|
uninstall Nero and try a clean install. If the DVD is protection free it should just copy fine - that's if its a single layer disk.
|
|
sajjan1
Suspended due to non-functional email address
|
9. September 2009 @ 14:16 |
Link to this message
|
|
Yes, i will do so tommorow and let you know the results.
Thanks for your time and advise!
|
|
sajjan1
Suspended due to non-functional email address
|
16. September 2009 @ 07:53 |
Link to this message
|
Here is a log of what is happening:
01:18:30 File LangStreamPatcher.cpp, Line 56
Command table patching started...
01:18:30 File LangStreamPatcher.cpp, Line 129
All tables successfully patched!
Burn settings:
Target: _NEC DVD_RW ND-4551A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: My Documents\Nero Recode (29160247296 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD DL, ram.cfm" class="forum_link" target="_blank">DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
01:18:37 File burn_dvdfiles.cpp, Line 237
Compile DVD: init
VMG Menus Vobs [2 vobus] 0.25MB -> 0.06MB [R 1.00]
Video: 0.04MB, extra: 0.02MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]
VTS_01 Title Vobs [14083 vobus] 3821.12MB -> 3821.12MB [R 1.00]
Video: 3586.21MB, extra: 234.91MB
Audio: 1 streams
0. 0. MPEG-1 2-ch Unspecified 207.40MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
01:18:38 File burn_dvdfiles.cpp, Line 1243
Compile DVD: begin copy 1
01:18:38 File NeroRecorderBase.cpp, Line 510
Writing to disc: DVD+R
01:18:38 File NeroRecorderBase.cpp, Line 524
Free capacity on disc: 2283092 sectors (2295104)
01:19:02 File burn_dvdfiles.cpp, Line 547
Compile DVD: burning 2283092 sectors (1956530 required)
01:19:02 File burn_dvdfiles.cpp, Line 743
Compile DVD: adjust target size to 4459.16MB (3821.35MB obtained)
01:19:02 File burn_dvdfiles.cpp, Line 593
Compiling DVD Volume started
01:19:02 File vob_record.cpp, Line 647
DirectBurn offset: VIDEO_TS.VOB 16
01:19:02 File burn_dvdfiles.cpp, Line 1149
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.25MB -> Expected 0.06MB -> Output 0.06MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.02MB
Source video size = 0.04MB
Pictures Modified [I 0] [P 0] [B 0]
01:19:33 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 144
01:51:18 File NeroRecorder.cpp, Line 668
Burn failed (3)
----- Begin NeroAPI error log -----
1K20-58X3-0K95-4014-5038-617A-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero API version: 8.3.2.1
Using interface version: 8.0.1.1
Installed in: C:\Program Files\Nero\Nero8\Nero Burning Rom\
Application: Nero\Nero Recode
Internal Version: 8, 3, 2, 1
Recorder: <_NEC DVD_RW ND-4551A> Version: 1-85 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : SAMSUNG SP2504C iaStor Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-4551A E: CdRom0
JLMS DVD-ROM XJ-HD166 F: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 281MB (288632kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.1.2006
NeroAPI
01:18:38 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
01:18:38 #2 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 0 ( 0:00.00, 0MB)
01:18:38 #3 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO
01:18:38 #4 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: _NEC DVD_RW ND-4551A, Media type: DVD+R
01:18:38 #5 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:18:58 #6 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.
01:18:58 #7 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Access is denied.
01:19:02 #8 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
01:19:02 #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1028
Estimated filesystem size: 544
01:19:02 #10 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
01:19:02 #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1727
Buffering files started
01:19:02 #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1433
Buffering VIDEO_TS.VOB
01:19:02 #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2632
Finished buffering file VIDEO_TS.VOB of size 63488 bytes (31 sectors)
01:19:02 #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VIDEO_TS.VOB of size 63488 bytes (31 sectors)
01:19:02 #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2712
Buffering files finished successfully
01:19:03 #16 CDR -1205 File BurnAtOnceRecorder.cpp, Line 1889
Burning Layer 1
01:19:04 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x0b5c1440: Len x804
01:19:04 #18 Text 0 File DVDR.cpp, Line 7494
Drive: _NEC DVD_RW ND-4551A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
01:19:04 #19 Text 0 File DVDR.cpp, Line 6901
Drive: _NEC DVD_RW ND-4551A
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
01:19:04 #20 CDR -1207 File DVDR.cpp, Line 6605
Book Type automatically set to: DVD-ROM
01:19:04 #21 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
01:19:32 #22 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 0. Length: 624
01:19:32 #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1916
Reserved start fragment at 0
01:19:33 #24 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 624. Length: 64
01:19:33 #25 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_1.VOB at sector 688
01:28:22 #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)
01:28:22 #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2310
Added extra file VTS_01_2.VOB
01:28:22 #28 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_2.VOB at sector 524975
01:36:47 #29 Text 0 File BurnAtOnceRecorder.cpp, Line 2699
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)
01:36:47 #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2310
Added extra file VTS_01_3.VOB
01:36:47 #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_3.VOB at sector 1049262
01:51:18 #32 SPTI -1114 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 14 64 D0 00 00 10 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x0b440040: Len x8000
0x00 00 01 BA 44 25 C4 AC C4 1D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 80 05 21 09 73 50 91 E6 AE B0 45
0x69 AE 85 82 23 7D DD 55 B9 D0 9A 54 B7 35 75 4A
01:51:18 #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2181
Failed to write cache to disc at 1336528
01:51:18 #34 Phase 179 File APIProgress.cpp, Line 282
Writing file to disc failed
01:51:22 #35 Text 0 File BurnAtOnceRecorder.cpp, Line 3716
Disc info:
Partitions: 0
01:51:22 #36 Text 0 File DVDR.cpp, Line 7494
Drive: _NEC DVD_RW ND-4551A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
01:51:22 #37 Text 0 File DVDR.cpp, Line 6901
Drive: _NEC DVD_RW ND-4551A
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
01:51:22 #38 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
01:51:22 #39 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
01:51:22 #40 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
01:51:25 #41 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)
|
|
Advertisement
|
|
|
Junior Member
|
16. September 2009 @ 08:48 |
Link to this message
|
I would suggest that there are a few problems here;
1- Memory in use : 72 % =WAY too high.
2- Free physical memory: 281MB =Way too small
3- Check supported media : Disabled =not sure why this needs to be disabled and maybe causing an error if the media is not suitable
4- KEY_ILLEGAL_REQUEST = suggest that disk and firmware on drive are not compatible. Have you tried updating your firmware or using a DVD-R? Or copy-protection on the disk
5-BurnAtOnceRecorder = this function is going to struggle with so little memory esp in Nero which is a memory hog
6-KEY_UNIT_ATTENTION = drive has reset because it's got really upset with something most likely the combination of errors before.
I would suggest (and I'm open to ideas)
Copy protection or errors on the disk/files you are transcoding. I would try running the files through DVDFab or similar to check for copy protection and check for scratched/ bad disk
Multiple programs and low on memory causing Nero to flake. Close any other progs down and try to free up some memory. Ideally use another prog to burn which doesn't need so much resource. If you want to burn a normal DVD image (to play on DVD player etc) then try Imgburn. It's free and v. good.
Old firmware/media compatibility problem. Try updating your firmware and try a DVD-R disk or another better brand of disk.
Hope this helps. It could just be one of these issues causing the fail but because they are all popping up on the error log I would suggest that its the combination of factors killing the burn.
|
