|
|
|
Nero 7 Burn Error Log
|
|
|
081081
Newbie
|
22. January 2010 @ 06:54 |
Link to this message
|
Please Help used various Disk Types and Programs
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-T50N>Version: RP05 - HA 1 TA 0 - 7.10.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <XIZQ 1ANCLYROXQB0 >Version: 3.5Z - HA 1 TA 1 - 7.10.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : XIZQ 1ANCLYROXQB0 3.5Z aweaj0mr Port 7 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-T50N E: CdRom0
XIZQ 1ANCLYROXQB0 F: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1979MB (2026768kB)
Free physical memory: 1411MB (1445840kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.1.2010
===== Disc-Copy over image - 1st step : Copy to image ...
10:48:05 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:48:05 #2 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
10:48:05 #3 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-ROM
S01 T01 Con 0x04 Start 0 Len 1100439 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:48:05 #4 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 1100439 = 1100439, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:48:05 #5 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
10:48:05 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1100438 (244:32.38, 2149MB)
10:48:05 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
10:48:05 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:48:05 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1100439 (1100439) = #1100439/244:32.39
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1100439 blocks [Image Recorder]
--------------------------------------------------------------
10:48:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2253699072, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1100439 | 1100439 | 0x00
1100439 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:48:05 #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)
10:48:05 #12 Phase 120 File dlgbrnst.cpp, Line 1762
Creating the image for burning
10:48:05 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:48:05 #14 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
10:50:05 #15 Text 0 File WriterStatus.cpp, Line 113
<Image Recorder> start writing Lead-Out at LBA 1100439 (10CA97h), length 0 blocks
10:50:05 #16 Phase 121 File dlgbrnst.cpp, Line 1762
Creating Image completed successfully
10:50:07 #17 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:50:08 #18 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:50:08 #19 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ...
10:50:09 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:50:16 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2253699072
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Users\Michael\Documents\TempImage.nrg>
10:50:16 #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
10:50:16 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1100438 (244:32.38, 2149MB)
10:50:16 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
10:50:16 #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-T50N, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: F16, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
10:50:16 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:50:16 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1100439 (1100439) = #1100439/244:32.39
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1100439 blocks [E: HL-DT-ST DVDRAM GSA-T50N]
--------------------------------------------------------------
10:50:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-T50N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2253699072, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1100439 | 0 | 0x00
1100439 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:50:16 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
10:50:16 #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)
10:50:16 #12 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
10:50:16 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:50:16 #14 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RITEK...
Media type ID: F16
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38 ...RITEK...F16.8
23 54 37 11 02 6C 6C 02 - BE 66 16 16 0B 0B 0A 0A #T7..ll..f......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
10:50:16 #15 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
10:50:16 #16 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
10:51:38 #17 SPTI -1039 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x2A 00 00 01 D0 20 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 35 01 04 0E 09 02
Buffer x0f312180: Len x10000
0x00 00 01 BA 44 26 6E FF C4 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 0F C9 9F 91 9D 54 83 9D 64
0xF8 FE 04 00 EC B0 1F 34 00 00 01 14 33 88 30 61
10:51:38 #18 CDR -1039 File Writer.cpp, Line 303
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-T50N
10:51:39 #19 SPTI -1039 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 0A 35 01 04 0E 09 02
10:51:39 #20 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
10:51:59 #21 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 118816
10:51:59 #22 CDR -1039 File WriterStatus.cpp, Line 162
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-T50N
10:51:59 #23 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
10:52:00 #24 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)
10:52:00 #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:52:03 #26 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
10:52:03 #27 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
|
