|
|
|
Experiencing Difficulty Using DVD RB and CCE? If So, Then Ask Your Questions Here.
|
|
|
brobear
Suspended permanently
|
17. June 2005 @ 01:27 |
Link to this message
|
|
predator9
Just curious, what do you call a decent computer? Throw in a brand, model and some specs and then the rest of us might be able to make a better assessment of your situation. What operating system are you using? My old Gateway 350MHz was a decent comp, but it got dated and I traded up. I know that example is a bit extreme. Your processor has enough speed, but what type is it and what is the front side bus on it. 1 GB RAM is sufficient, so RAM shouldn't be an issue, unless you're trying to multi task and using some really memory intensive programing other than the recording software. If you have a "decent" PC, then it sounds as though it may be stuck in PIO. If I were you, I'd check the control panel to see what the DMA settings are. If it's not that, I'd try a newer or different version of SP or the retail Basic version and do a clean install with the Rockas installer.
This message has been edited since posting. Last time this message was edited on 17. June 2005 @ 01:44
|
|
Advertisement
|
 |
|
|
|
predator9
Newbie
|
17. June 2005 @ 03:48 |
Link to this message
|
|
hey brobear,
I am actually running a hp763n, I have no idea what the front side bus is, so if you tell me how to figure it out I can do that for you. I have 3 hard drives, one original 70GB and then my add ons being a Western Digital 160GB and a maxtor 200GB, They are all in Ultra DMA mode, I already checked thinking maybe that was the problem. About my comp, Everything runs fine most of the time, I just preformed diskeeper on all of my drives and they are all healthy. I also try to not use any programs while running rebuilder, but I do occasionally use firefox (like I am doing now) I have beem encoding for a little over 5 and a half hours now and and I am at 15% of a 6 pass with CCE.
I have talked to a few people about my problem to no avail, I did talk to one that had just about the same specs as me and he said it should only take between 1-2 hours to do 1 pass. I dont know whats going on, I have ran virus scans and spyware scans and still havent figured it out. I was told to go here because the people that are here know more about these programs than anyone else.
Thanks and I hope we can figure this out, it becomes frustrating when I can't use my computer for 24+ hours.
Pred...
EDIT: Oh, and I have also tried a different version of CCE as well as DVD Rebuilder and neither helped. I have downgraded my DVDRebuilder and upgrade my CCE, Actually before I was using a different version of rebuilder and I was having problems with output size. These programs have proved to be a little difficult for me so far.... :-)
This message has been edited since posting. Last time this message was edited on 17. June 2005 @ 03:51
|
|
whipshock
Newbie
|
17. June 2005 @ 06:47 |
Link to this message
|
|
@Sophocles
Thats the same guide i followed, it resulted in 1 DVD (VIDEO_TS) but two separate titles within the DVD, each are around 3.7 GB. When I load this in DVD-RB i only see VTS_01 (3.7GB), not the other title. Do you know of a way to merge these titles into 1 so theres 1 title of ~ 7.4GB ?
|
AfterDawn Addict
|
17. June 2005 @ 14:30 |
Link to this message
|
whipshock,
I'm not sure if this is what you're asking but there is a way of merging both sides of a flipper disc so that you only have one title and one menu using DvdReMake. You can follow this guide, after you're done, run those files thru RB/CCE and you should come out with a 4.33(or so) disc with one menu that operates both sides of the flipper disc. The movie will play seamlessly. Make sure you are in advanced mode of DvdReMake for this to work.
http://cgi.tripod.com/321ripforum/cgi-bin/YaBB.pl?board=remake_ca...
BTW, even using the Remake "merge Dvd's" feature where you have to choose side A or side B should work with RB/CCE. I have used it both ways and RB/CCE has always recognized both titles and came out right at 4.33. You will have a choice of disc 1 or disc 2 with the Remake emblem as your root menu. After you choose, then the respective menu should come up for the associated side.
Are you sure you exported your finished merged Dvd project to a seperate folder that you then used in RB/CCE?
 GO VOLS !This message has been edited since posting. Last time this message was edited on 17. June 2005 @ 14:42
|
|
whipshock
Newbie
|
17. June 2005 @ 18:52 |
Link to this message
|
@bigorange
thanks for the reply. i followed that link you posted and tried to register to read the thread but got a 500 error, site must be having issues
anyway yes i used the merge feature and selected projects for disc1 & disc2, and resulted in a merged project with two separate titles, saved to a new folder. i believe DVD-RB (0.93.2) only showed 1 title of around 3GB, im going to try again. my problem might be this however which i forgot and failed to mention: disc1 and disc2 are not the full originals, they are only the vobs from the main movie and i re-created the IFOs with IFOEdit. they are playable except they arent full disc backups anymore, they are movie-only backups. could this be the problem? i dont see why
is there a way to author a brand new dvd by importing all of the vobs as one title using an authoring program?
|
AfterDawn Addict
|
17. June 2005 @ 19:27 |
Link to this message
|
If you don't want the original menu, you can author the movie only with your own menu using an authoring proggy like NVE 3 or DvdLab Pro.
If I was using a DVD to copy from I would use the original menu, there are plenty of proggys that allow you to do movie and menu only. You could write to your HDD with no compression, then run them thru Remake and then compress with your favorite app and burn.
However, if you only have movie only then try NVE 3. It can be used using the trial if you don't have Nero Ultra 6. Ultra 6 is good each and every month from the 22nd to the 22nd. It must then be reloaded and installed after the trial expires. I also have a NVE 3 guide I wrote, for authoring a custom menu. I use it for movies off of TV(movie channels) and VHS for movies that simply aren't on DVD yet. My favorite is DvdLab Pro, but it costs 200.00 and you can use NVE 3 for free. NVE 3 allows chapters, custom backgrounds and moving clips with a handy import feature and it will write directly to a disc, or to your HDD and then run it thru whatever app you wish.
I'm not sure why you couldn't get in the forum, they have new members joining every day. My NVE 3 guide is also in there under Nero Ultra 6.
Try this link-
http://321ripforum.tripod.com/
if that doesn't work, try this-
http://cgi.tripod.com/321ripforum/cgi-bin/YaBB.pl
My NVE 3 guide is also here under Big O's mini guides:
http://www.zentarium.com/forums/forumdisplay.php?f=82
If you still can't get to the Remake guide let me know and I'll post it in AD in the Remake section. We don't want to stray from the thread here which deals with RB/CCE. Good luck :>)
GO VOLS !
This message has been edited since posting. Last time this message was edited on 17. June 2005 @ 19:28
|
|
whipshock
Newbie
|
17. June 2005 @ 20:17 |
Link to this message
|
|
@bigorange
thanks for your help again, im going to play around with NVE 3 and see if i can get it to do what i want
i still can't seem to sign up at 321, just tried again im getting 500 internal server error - strange. anyway i will keep trying and i managed to view some of your other guides regarding NVE. i will try to re-author both movie-only sides of the flipper into 1 with custom menus and see if DVD-RB/CCE will do the job. thanks again!
|
AfterDawn Addict
|
17. June 2005 @ 20:44 |
Link to this message
|
GO VOLS !
This message has been edited since posting. Last time this message was edited on 17. June 2005 @ 20:53
|
|
whipshock
Newbie
|
19. June 2005 @ 09:57 |
Link to this message
|
|
@bigorange
thank you very much for all of your help posting guides, explanations, etc. ive been struggling with this flipper forever now. the closest ive come is in NVE3, i can import all 8 VOB files from both sides of the disc and renamed like so: (VTS_01_1 - 01_8) and NVE3 asks me if i want to treat them as 1 title (great) so i say yes. then i add fancy menus and chapter marks and everything looks great. however when i get to the final output process it seems like it wants to compress my video using its own compression. it says the output will be ~5.64 GB when the original totals to ~ 7GB. id like to output my entire project UNCOMPRESSED so i can process it in DVD-RB/CCE
is there anyway to set NVE3 to not compress at all or to trick it in some way. this would solve my problem entirely!
also i didnt see any sound options, id like to preserve my DD5.1
This message has been edited since posting. Last time this message was edited on 19. June 2005 @ 09:58
|
AfterDawn Addict
|
19. June 2005 @ 10:29 |
Link to this message
|
|
Have NVE 3 write to a folder to your HDD instead of burning to a disc. Then run those files thru a proggy of your choice and burn to disc. :>)
GO VOLS !
|
AfterDawn Addict
1 product review
|
19. June 2005 @ 19:33 |
Link to this message
|
|
predator9
What processor are you using. IE: P4 2.8 at 533/800 frontside bus. The speed of your processor (CPU)is a multiple of of your CPU's clock multiplier and your frontside bus.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
predator9
Newbie
|
19. June 2005 @ 21:32 |
Link to this message
|
|
sophocles,
I am using a P4 2.53 Ghz and 533 front side bus. Anything else you need to know just ask :-)
Thanks
Pred...
|
|
64026402
Senior Member
|
20. June 2005 @ 03:27 |
Link to this message
|
|
Predator9
An overheating processor can case a P4 to throttle down. Just make sure the PS fan and processor fan are working.
You can also check the task manager under the processes tab to find out were the CPU time is being used. It should be mostly on CCE.
Donald
|
|
64026402
Senior Member
|
20. June 2005 @ 03:38 |
Link to this message
|
Whipshock,
You can change the quality of the encode in settings changing the output size but it doesn't have an uncompressed mode like DVDrebuilder. It will just be a few different sizes. You can't really control the size precisely.
I have gone the highest quality setting then run whatever comes out though DVDrebuilder or other program to size. I have used it on home videos and PAL to NTSC conversions.
If you are just redoing a flipper disk then remake would be better.
Donald
|
|
brobear
Suspended permanently
|
20. June 2005 @ 20:43 |
Link to this message
|
|
Sophocles,
Realizing you are knowledgable about systems and how the various components interact, I thought I'd just throw in the specs on a 763n HP desktop. These are typical specs. Noticed predator9's started with a 70GB HD and some additional drives were added.
Operating System Microsoft Windows XP Home Edition
Processor Intel Pentium 4 2.53 GHz
Installed Memory 512 MB (DDR SDRAM)
Recommended Use Home Use
Form Factor Tower
Processor
Processor Type Intel Pentium 4
Processor Speed 2.53 GHz
Processor Manufacturer Intel
Motherboard
Bus Speed 533 MHz
Video Output Interface AGP 4x
Memory
RAM Technology DDR SDRAM
Installed RAM 512 MB
Max Supported RAM 2 GB
Installed Video Memory 64 MB
Installed Cache Memory 512 KB
Hard Drive
Hard Drive Capacity 80 GB
CD / DVD
Optical Drive Type DVD+RW
Optical Drive Read Speed 2x (DVD) ? 32x (CD) ? 8x (DVD)
Optical Drive Write Speed 12x (CD-R)
Optical Drive ReWrite Speed 10x (CD-RW) ? 2.4x (DVD+RW)
Other Drives
Floppy Drive 3.5" 1.44 MB floppy
Audio / Video
Audio Output Type Sound Card
Modem
Modem Type Fax / Modem
Networking
Networking Type Network Adapter
Data Link Protocol Ethernet ? Fast Ethernet
predator9
The WD and Maxtor HDDs, are they internal or external drives? How are they configured in the system?
|
|
predator9
Newbie
|
20. June 2005 @ 22:55 |
Link to this message
|
|
@ BroBear
My 2 other HD's are internal, as for configuration...hmmm I just installed them with the software that came along with them. I tried moving my movie files from my E: (which is the maxtor) to my c: which is my main one 80GB) and it still ran extremly slow.
And also took advice from another buddy and he told me when all else fails format your hard drive, so I tried that, and to begin with it was running at 1.40+ but I returned when I woke up in the morning and it had only done 25% and was running at 0.60 for speed.
lol...I like the program but for the time...hmmm...
Pred...
|
|
whipshock
Newbie
|
21. June 2005 @ 17:51 |
Link to this message
|
|
@bigorange and 64026402
thanks for all of the help... i am *still* struggling with this disc but im pretty sure its the way i ripped it originally, ive never had as much trouble with any DVD as this one. im just going to wait until its returned to me and re-rip it because a friend is borrowing it and i refuse to waste anymore time tinkering with what i have. i HAVE learned quite a bit from this tho :)
|
AfterDawn Addict
1 product review
|
22. June 2005 @ 10:20 |
Link to this message
|
predator9
Do a system analysis with sisoft or download a copy of Belarc advisor and post the results here. Be sure to remove any personal information before posting.
http://www.belarc.com/free_download.html
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
predator9
Newbie
|
23. June 2005 @ 21:20 |
Link to this message
|
|
@ Sophocles
here is the results, I dont really see anything that should be blacked out, and I dont really know how to do that anyway lol
Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) HP Pavilion 05 P9853A-ABA 763N 4401211RE101TANGO
System Serial Number:
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.53 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: Hewlett-Packard HP System Board HP P/N
Serial Number: KD0000000000
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD VG31309 08/15/2002
Drives Memory Modules c,d
443.96 Gigabytes Usable Hard Drive Capacity
146.43 Gigabytes Hard Drive Free Space
HP DVD Writer 200j [CD-ROM drive]
3.5" format removeable media [Floppy drive]
Maxtor 6B200P0 [Hard drive] (203.92 GB) -- drive 2
SAMSUNG SV8004H [Hard drive] (80.06 GB) -- drive 0, s/n 0429J1FT705785, rev QR100-07, SMART Status: Healthy
WDC WD1600JB-75GVA0 [Hard drive] (160.00 GB) -- drive 1, s/n WD-WCAL91059758, rev 08.02D08, SMART Status: Healthy 1024 Megabytes Installed Memory
Slot 'A0' has 512 MB
Slot 'A1' has 512 MB
Local Drive Volumes
c: (NTFS on drive 0) 74.65 GB 58.55 GB free
d: (NTFS on drive 1) 160.00 GB 47.17 GB free
e: (NTFS on drive 2) 203.92 GB 39.72 GB free
f: (FAT32 on drive 0) 5.38 GB 984 MB free
Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Owner 6/21/2005 9:01:39 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
SUPPORT_fddfa904 never
Marks a disabled account; Marks a locked account hp psc 700 series on DOT4_001
Microsoft Shared Fax Driver on SHRFAX:
Controllers Display
Standard floppy disk controller
Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] NVIDIA GeForce FX 5200 [Display adapter]
Default Monitor
Samsung SyncMaster [Monitor] (14.9"vis, s/n H4NT901468, September 2002)
Bus Adapters Multimedia
A357SCSI SCSI Controller
Intel PCI to USB Enhanced Host Controller
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 Multimedia Audio Controller
Communications Other Devices
Lucent Win Modem
1394 Net Adapter
Realtek RTL8139 Family PCI Fast Ethernet NIC
primary Auto IP Address: 68.146.107.32 / 22
Gateway: 68.146.104.1
Dhcp Server: 64.59.135.150
Physical Address: 00:40:CA:2F:0B:44
Networking Dns Servers: 64.59.135.133
64.59.135.135
OHCI Compliant IEEE 1394 Host Controller
HP PS2 Keyboard (2K - 3)
PS/2 Compatible Mouse
USB 2.0 Root Hub
USB Root Hub (3x)
Virus Protection [Back to Top]
McAfee VirusScan Version 9.1.08
Scan Engine Version 4.4.00
Virus Definitions Version 4.0.4519
Last Disk Scan on Monday, June 20, 2005 11:28:44 PM
Realtime File Scanning On
Missing Microsoft Security Hotfixes [Back to Top]
All required security hotfixes (using the 06/14/2005 Microsoft Security Bulletin Summary) have been installed.
Installed Microsoft Hotfixes [Back to Top]
Internet Explorer 6
SP0
KB834707-IE6-20040929.115007 on 6/21/2005 (details...)
Internet Explorer
SP2 (SP2)
Step By Step Interactive Training
SP2
KB898458 on 6/21/2005 (details...)
Windows XP
SP2
KB811113[SP] on 6/21/2005 (details...)
SP3
KB873333 on 6/21/2005 (details...)
KB873339 on 6/21/2005 (details...)
KB883939 on 6/21/2005 (details...)
KB885250 on 6/21/2005 (details...)
KB885835 on 6/21/2005 (details...)
KB885836 on 6/21/2005 (details...)
Windows XP
SP3 (continued)
KB886185 on 6/21/2005 (details...)
KB887472 on 6/21/2005 (details...)
KB887742 on 6/21/2005 (details...)
KB888113 on 6/21/2005 (details...)
KB888302 on 6/21/2005 (details...)
KB890046 on 6/21/2005 (details...)
KB890175 on 6/21/2005 (details...)
KB890859 on 6/21/2005 (details...)
KB891781 on 6/21/2005 (details...)
KB893066 on 6/21/2005 (details...)
KB893086 on 6/21/2005 (details...)
KB893803V2 on 6/21/2005 (details...)
KB896358 on 6/21/2005 (details...)
KB896422 on 6/21/2005 (details...)
KB896428 on 6/21/2005 (details...)
Click here to see all available Microsoft security hotfixes for this computer.
Marks a security hotfix (using the 06/14/2005 Microsoft Security Bulletin Summary)
Marks a hotfix that verifies correctly
Marks a hotfix that fails verification (note that failing hotfixes need to be reinstalled)
Unmarked hotfixes lack the data to allow verification
Click here for Belarc's System Management products, for large and small companies.
Software Licenses [Back to Top]
ACD Systems - ACDPhotoEditor 77
ACD Systems - ACDSee 16
ACD Systems - FotoSlate 34
Ahead - Nero Fast CD-Burning Plug-in 1A23-2047-7036-4200-3932-6632
Belarc - Advisor 4e8a02be
Corel - WordPerfect Productivity Pack WXP
Microsoft - Interactive Training 20402-OEM-0000007-00000
Microsoft - Internet Explorer 55277-OEM-0011903-00106
Microsoft - WebFldrs XP
Microsoft - Windows XP Home Edition
Software Versions (mouse over * for details, click * for location) [Back to Top]
ACD FotoSlate 3.1 Application Version 3,1,23,0 *
ACD Photo Editor Version 3,1,44,2 *
ACD Systems, Ltd. - Device Detector Version 3,0,9,0 *
ACDSee 7.0 Version 7,0,102,4 *
Acon Digital Media GmbH - Nero SoundTrax Version 1, 0, 0, 0 *
Adobe Acrobat Reader Version 5.0.0.0 *
Ahead Software AG - Cover Designer Version 2, 3, 0, 0 *
Ahead Software AG - InfoTool Application Version 2, 0, 0, 0 *
Ahead Software AG - Nero BackItUp Version 1, 0, 0, 0 *
Ahead Software AG - Nero Burning ROM Version 6, 0, 0, 0 *
Ahead Software AG - Nero CD - DVD Speed Version 2, 0, 0, 0 *
Ahead Software AG - Nero DriveSpeed Version 2, 0, 0, 0 *
Ahead Software AG - Nero ImageDrive Version 2, 23, 0, 0 *
Ahead Software AG - Nero StartSmart Version 1, 0, 0, 0 *
Ahead Software AG - Nero Wave Editor Version 2, 0, 0, 0 *
Ahead Software Gmbh NeroCheck Version 1, 0, 0, 2 *
Alcohol 120% Version 1.9 *
Alcohol Soft Development Team Version 1.4 *
Alexander Roshal - WinRAR archiver Version 3.42.0.0 *
America Online, Inc. - 4114.256a Client Version Version 7.0.0.0 *
AOL - 4114.65a Client Version Version 7.0.0.0 *
ArcSoft - PhotoImpression Version 4.0.0.73 *
ArcSoft Inc. - Funhouse Version 1.0.0.27 *
ArcSoft Inc. - Greeting Card Creator Version 1.0.0.116 *
ArcSoft Inc. - ShowBiz Version 1.2.3.11 *
Azureus *
BackWeb Shadow Module Installer Version 1.0 (Build 194R) *
Belarc, Inc. - Advisor Version 7.0o *
Britannica's Online Service *
Cinematronics - 3D Pinball Version 5.1.2600.2180 *
CompuServe Interactive Services, Inc. - 4111.50a Client Version Version 6.0.2.0 *
ConeXware, Inc. - PowerArchiver 2004 Version 9.01 *
Copyright © 2005 jdobbs softworks in association with Rockas - CCE & ProCoder - Configuration *
Corel Corporation Limited - PerfectScript 10 Version 10.0.0.663 *
Corel Corporation Limited - Quattro(R) Pro 10 Version 10.0.0.663 *
Corel Corporation Limited - WordPerfect (R) Office 2002 Version 10.0.0.663 *
Corel Corporation Limited - WordPerfect(R) 10 Version 10.0.0.663 *
Corel(R) Presentations (TM) 10 Version 10.0.0.663 *
CorelDRAW(R) Version 10.668 *
Custom Technology Corporation - Cinema Craft Encoder SP Standalone Edition Version 2, 67, 0, 27 *
DVD Shrink Version 3.2.0.15 *
dvdSanta Version 2, 0, 0, 1 *
EarthLink - E5_07Lite Version 5.07.9 Lite Build 1 *
Elaborate Bytes AG - CloneDVD Version 2, 1, 0, 0 *
Elaborate Bytes CloneDVD Version 2, 8, 2, 1 *
Hewlett-Packard - Ereg Application Version 1, 0, 0, 1 *
Hewlett-Packard - HP Service Delivery Platform Version 1,7,0,442 *
Hewlett-Packard - HPSysInfo Version 4.0.0.1 *
Hewlett-Packard - WebReg Application Version 1, 0, 0, 1 *
Hewlett-Packard Co. - Cloaker, Cloaker, Cloaker! Version 3, 0, 0, 0 *
Hewlett-Packard Co. - hp psc 700 series A.14.03.07 *
Hewlett-Packard Company - HP Memories Disc Creator Software Version 1.0.3.0 *
Hewlett-Packard Company - HP Printing System for Windows Version 1998.0227.1034 *
Hewlett-Packard Company - hpsysdrv Version 1, 7, 0, 0 *
Hewlett-Packard Company KBD EXE Version 1.0.2.0 *
Hewlett-Packard Company PS2 EXE Version 1.0.2.1 *
Hewlett-Packard hpocon07 Version 2, 0, 1, 2 *
hp center *
hp welcome gift *
HPDirector Module Version 1, 0, 0, 1 *
Hpi_Prnt Application Version 1.1.0.121 *
HpqCmon Application Version 1.1.0.121 *
HpqPhUnl Application Version 1.1.0.121 * Inno Setup Version 51.15.0.0 *
Installation Version 1.0.0.0 *
Intel(R) Common User Interface Version 7,0,0,1607 *
InterVideo WinDVD Version 3.2.41.166 *
Intuit, Inc. - QuickenFC Version 1.0.06 *
iolo DriveScrubber Version 2.0.1.0 *
iolo technologies, LLC - Search and Recover Version 1.0.3.0 *
iolo technologies, LLC - System Mechanic ® Version 4.0.10.0 *
iolo technologies, LLC - System Shield ® Version 2.1.1.0 *
jdobbs softworks - DVD Rebuilder Version 0.93.0002 *
LIGHTNING UK! - DVD Decrypter Version 3.5.4.0 *
McAfee Application Installer Version 5, 0, 0, 0 *
McAfee Personal Firewall (MPF) Version 6.1.0.44 *
McAfee Personal Firewall Version 6.1.0.44 *
McAfee SecurityCenter Update Manager Version 5, 0, 0, 0 *
McAfee SecurityCenter Version 5, 1, 0, 0 *
McAfee VirusScan Version 9, 1, 0, 0 *
Microsoft (r) Windows Script Host Version 5.6.0.8820 *
Microsoft AntiSpyware (Beta 1) Version 1.00.0501 *
Microsoft Corporation - Internet Explorer Version 6.00.2900.2180 *
Microsoft Corporation - Messenger Version 4.7.3001 *
Microsoft Corporation - Windows Installer - Unicode Version 3.1.4000.1823 *
Microsoft Corporation - Windows Movie Maker Version 2.1.4026.0 *
Microsoft Corporation - Windows® NetMeeting® Version 3.01 *
Microsoft Corporation - Zone.com Version 1.2.626.1 *
Microsoft Data Access Components Version 3.525.1117.0 *
Microsoft Interactive Training Version 3, 5, 0, 117 *
Microsoft(R) MSN (R) Communications System Version 6.10.0016.1624 *
Microsoft(R) Windows Media Player Version 9.00.00.3250 *
Microsoft® Fax Server Version 5.2.1776.0 *
Mozilla - Firefox Version 1.7.7: 2005041417 *
Multithread Benchmark *
MUSICMATCH Jukebox Version 7.10.3007 *
MyDVD Application Version 3.5.2.0 *
Network Associates, Inc. - McAfee On-Access Scanner Version 6.2.0 *
NVIDIA Driver Helper Service, Version 61.21 Version 6.14.10.6121 *
PC-Doctor For Windows 3.0 Version 3.0 *
Peter A. Gebhard Software - Dr. Hardware 2005 Version 6.0.0 *
Python extension Version 2.2.0.146 *
python.exe *
pythonw.exe *
Recguard Application Version 1, 0, 0, 1 *
SoftThinks - SmInst Application Version 2, 0, 0, 5 *
Sun Microsystems, Inc. - Java(TM) 2 Platform Standard Edition 5.0 Update 2 Version 5.0.20.9 *
SysLaunch Application Version 1, 0, 0, 1 *
VERITAS Software Corporation - RecordNow Version 3.55 *
VERITAS Software, Inc. - Direct Access Component Version 1.0.0.1 *
WildTangent - Atomic Pop Version 1.00 *
WildTangent - Betty Bad Version 1.00 *
WildTangent - Blackhawk Striker Version 1.00 *
WildTangent - BlasterBall Wild Version 1.00 *
WildTangent - Dark Orbit Version 1.00 *
WildTangent - GemMaster 2 Version 1.00 *
WildTangent - Kublox Version 1.00 *
WildTangent - SabreWing 2 Version 1.00 *
WildTangent - Snowboard Extreme Version 1.00 *
WildTangent - Space Rocks Version 1.00 *
WildTangent - SpaceRocks Launcher Version 1.00 *
WildTangent - Speedway Launcher Version 1.00 *
WildTangent - Virtual Warfare Version 1.00 *
WildTangent DDCActiveMenu Module Version 1, 1, 1, 019 *
wtlaunch Module Version 1, 0, 0, 1 *
--------------------------------------------------------------------------------
* Click to see where software is installed.
a. Megahertz measurement may be inaccurate if other programs were busy during last analysis.
b. Data may be transferred on the bus at one, two, or four times the Bus Clock rate.
c. Memory slot contents may not add up to Installed Memory if some memory is not recognized by Windows.
d. Memory slot contents is reported by the motherboard BIOS. Contact system vendor if slot contents are wrong.
e. This may be the manufacturer's factory installed product key rather than yours.
Copyright 2000-5, Belarc, Inc. All rights reserved.
Legal notice. U.S. Patents 6085229, 5665951 and Patents pending.
--------------------------------------------------------------------------------
This message has been edited since posting. Last time this message was edited on 23. June 2005 @ 21:22
|
AfterDawn Addict
1 product review
|
23. June 2005 @ 21:36 |
Link to this message
|
Quote:
Custom Technology Corporation - Cinema Craft Encoder SP Standalone Edition Version 2, 67, 0, 27 *
The above would be an example of sensitive information. Few of us can afford a standalone version of a $2000 software.
When you encode, how many passes do you have it set for. If you only set it for 2 then you should complete in around 3 to 4 hours with your system, but set it to 4 to 6 passes and it could take 10 or more hours.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. This message has been edited since posting. Last time this message was edited on 23. June 2005 @ 21:40
|
|
predator9
Newbie
|
24. June 2005 @ 00:55 |
Link to this message
|
|
@ Sophocles
Well It depends on the movie. I just did Boiler Room with Vin Diesel and I did a 6 Pass as the compression was about 70% and it took 21 hours. LOL I know that sounds retarded but I have tried alot of things I have tried formatting, I have tried unpluggin internet connection, running virus and spyware scans and I am running out of options aswell...lol...
Sorry had no idea that was sensitive information, do you have the software? I had no idea...
Thanks for the help sophocles! :-)
Pred...
|
Junior Member
|
24. June 2005 @ 03:50 |
Link to this message
|
|
@predator9
Something is "very" wrong with your computer... I suggest you take him to some technician that can fix that for you.
I usually make my encodes on a AMD XP 2000+ with 768MB Ram and it takes me (medium) 2-3 hours with CCE 2.50 at 2 passes (Vaf+1 pass).
Your computer is supposed to be faster
(OT: long live AMD lol)
|
AfterDawn Addict
1 product review
|
24. June 2005 @ 05:18 |
Link to this message
|
|
predator9
Six passes is a lot but I think that something else is slowing your system down. Check to make sure that all of your drives are set to DMA.
On your desktop go to "my computer" and right click, choose "properties", "hardware", and then "device manager." In the list look for IDE ATA ATAPI Controllers and click on the + to expand it. Right click on your primary channel and check to see if it's set to DMA. If it says PIO mode then you need to change it to DMA. Then do the same for your secondary drives and then reboot.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
HKT3020
Member
|
24. June 2005 @ 09:26 |
Link to this message
|
Have you tried closing unnecessary programs, (ctrl + alt + delete). AOL is a major resource hog, defragmenting also if you haven't already, also any problems with the PSU recently? Also have you tried backing up with DVD Shrink to see how long that takes just to show for the record?
|
|
Advertisement
|
|
|
|
predator9
Newbie
|
24. June 2005 @ 16:16 |
Link to this message
|
|
Thanks guys,
Yes, I checked all my hard drives all are on 'Ultra DMA mode 5'.
I have tried shuting down all the excess programs to no avail, seem s to keep at the same speed anyway.
Starts off strong at about 2.50 for speed but always ends up back down at about 0.6 or so.
I usually do less passes on less compression of course, I did a 5 pass right now and it took 849 Minutes.
It is really frustrating. I have no idea what to do, you have seen my specs and know everything...but still I have no idea what is wrong.
This sucks!!
Thanks for your help.
Pred...
EDIT:
And when I do DVD Shrink it takes about 12 minutes. for a DVD9, so I am debating going back to that.
I have tried doing CloneDVD2 first and elminating everything I want off of the DVD and tried just doing the DVD straight, both ways I end up with slow as hell speed.
This message has been edited since posting. Last time this message was edited on 24. June 2005 @ 16:18
|
|
