Originally posted by Atherstan:

---

Originally posted by bigclaret:

---

I know this is a long shot but is there anyone in the Blackburn, bolton, manchester, preston-ish area that could sort my boxes out for me..

I would of corse pay for the service and be eternaly greatful..

cheers stuart

---

Hi stuart
PM me I can see whot I can do I live nr leigh manchester.

---

Originally posted by nelsal:

---

hi peeps been reading through all the forums have had some help to off peeps like billie22. ozzy32 ,oggnogg, turner and others be damned if i can get this dbox2 sportster to flash , i not got clue wat am doing wrong , have set up name password ip address and am so close but nothing happening , i tryed the other way as well changing keys on tha bigmaq thing but tha dident work am trying to fxp it now it just not having none of it is there someone there can help me through this, i feel like giving up it such a headache...i would so be happy get this working

---

Originally posted by steo2k8:

---

Originally posted by jonesy23:

---

right done the who flash thing via null cable through hyperterminal.
now when i turn the box on it says lade ..... then goes off any help plz i have sagem dbox 1x chip i have used 3 imgs but arnt sure if they are the right ones. the box has linux on it wil that still be ther and any directions to imgs would a huge help thanx cj

---

you need a 1x image for that box

try this:

http://www.4shared.com/file/38082132/b20...07.html

---

Originally posted by bryandir:

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

hi there,i tried connecting via the fxp programme,it didnt work,i tried changing my box ip adress,and it still says "connection failed"

what is change dns?

is there anything else i need to do?

---

under dbox then network

put the ip as

192.168.000.003

and put the two bottom ones (dns) to

192.168.000.003 as well.

then pick start\restart network

then connect to that ip

---

still connection failed...hmmm...

---

Originally posted by bryandir:

---

hi sll,,,,i have tried all of the above ancannot connect to my dbox...any settingsi need to adjust?

cheers!!

---

Originally posted by steo2k8:

---

Originally posted by nelsal:

---

hi peeps been reading through all the forums have had some help to off peeps like billie22. ozzy32 ,oggnogg, turner and others be damned if i can get this dbox2 sportster to flash , i not got clue wat am doing wrong , have set up name password ip address and am so close but nothing happening , i tryed the other way as well changing keys on tha bigmaq thing but tha dident work am trying to fxp it now it just not having none of it is there someone there can help me through this, i feel like giving up it such a headache...i would so be happy get this working

---

check the box ip by pressing dbox and selecting network

select quick connect under file in flash fxp

type the ip from the box in the server box

username: root

password: dbox2

connect and put the image under tmp

then on the box exit the menus and press dbox then select service menu then image update\restore

press flash\read\write if not there pick expert functions

then pick flash whole image or flash without bootloader.

select the image and wait

---

Originally posted by nelsal:

---

hi steo cheers man have dun wat u said wat do i do next after this

---

Originally posted by paul_here:

---

that bradford image is afile not an image i think i placed it in the temp folder but could find it using Dbox2

---

Originally posted by Atherstan:

---

Originally posted by bigclaret:

---

I know this is a long shot but is there anyone in the Blackburn, bolton, manchester, preston-ish area that could sort my boxes out for me..

I would of corse pay for the service and be eternaly greatful..

cheers stuart

---

Hi stuart
Pm me I cansee whot I can do

---

Originally posted by bryandir:

---

hi..m trying the FTP thing,but it just keeps saying..

WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.163.000.003 -> IP=192.163.0.3 PORT=21
[R] Connected to 192.163.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connected to 192.168.000.003
[R] Error: 10054: Connection reset by peer
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #2
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 2)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #3
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 3)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #4
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 4)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #5
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 5)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #6
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 6)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #7
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 7)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #8
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 8)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #9
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 9)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Delaying for 120 seconds before reconnect attempt #10
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 10)
[R] Connected to 192.168.000.003
[R] Connection failed (Connection lost)
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1


any help?

---

Originally posted by steo2k8:

---

Originally posted by nelsal:

---

hi steo cheers man have dun wat u said wat do i do next after this

---

put this file in var\keys while you have flash fxp set up

unzip it first (rar)

http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html

then leave it on a black channel for a few seconds (about 30) and see if it comes on.

if error channel not availible comes up on all channels do a scan with fast scan off.

---

Originally posted by paul_here:

---

get cant open mtd device when trying to flash with new image

---

Originally posted by steo2k8:

---

Originally posted by paul_here:

---

let me know how you get on.
I am in buckingham and i have not got a clue what to download for my DB2 sportster 1.7 I think im in a cw area

---

ok.

first click > ftp < download flash fxp

then:

get an ethernet (lan) cable.

plug it in to your computer and box.

go to dbox then network on your box remote.

go to flash fxp on your computer and pick file then quick connect.

type your ip address from the box and put user name as root and password as dbox2 and connect. if it doesnt connect change your box ip and dns the same and then pick start\restart network on the box.

once connected go to var\keys and put the file in and overwrite.

wait a few seconds and your box will come back on.

if you need any more help just ask

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

hi sll,,,,i have tried all of the above ancannot connect to my dbox...any settingsi need to adjust?

cheers!!

---

change the box ip to

192.168.000.003

and the two dns to the same

pick start\restart network on the box and then try to connect

---

Originally posted by nelsal:

---

Originally posted by steo2k8:

---

Originally posted by nelsal:

---

hi steo cheers man have dun wat u said wat do i do next after this

---

put this file in var\keys while you have flash fxp set up

unzip it first (rar)

http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html

then leave it on a black channel for a few seconds (about 30) and see if it comes on.

if error channel not availible comes up on all channels do a scan with fast scan off.

---

steo its coming up cant open mtd device wat do i do...am so grateful for this

---

Originally posted by nelsal:

---

why a ethenet cable i was told to use a crossover cable or null cable ...am using a crossover cable is this right?

---