Originally posted by bryandir:

---

heres my settings

start network boot:on

dchp off

ip adress,subnet mask,broadcast,all 192.168.0.3

default gateway(never touched this) 192.168.1.1

dns server 192.168.1.1

anything wrong there you can spot?

cheers!

---

Originally posted by bryandir:

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

any help guys?please?pretty please?

---

just put everything the same and pick restart network above the ip

---

i have done all of the above with the network settings on the dbox....

i still get connection failed..

heres what im doing...

1)plug network cable into laptop.

2)plug dbox in to wall,and switch on.

3)open flashfxp

4)click on nagrarom7 file and click "quick connect.

5)enter the adress id as bove 192.168.000.003

6)user/password root and dbox2 (lower case)

7)click connect......and all i get is
WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #2



help?

---

are the wires tight and did you definately pick restart network. mine worked when i did that. try writing this as the server

192.168.0.3 wthout the multiple zeros

and port = 21

proxy = default

---

heres my settings

start network boot:on

dchp off

ip adress,subnet mask,broadcast,all 192.168.0.3

default gateway(never touched this) 192.168.1.1

dns server 192.168.1.1

anything wrong there you can spot?

cheers!

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

heres my settings

start network boot:on

dchp off

ip adress,subnet mask,broadcast,all 192.168.0.3

default gateway(never touched this) 192.168.1.1

dns server 192.168.1.1

anything wrong there you can spot?

cheers!

---

default gateway and dns server should be 192.168.000.003 also

then restart network above ip and then try to connect

---

Originally posted by bryandir:

---

is all above board?all correct?

the only other thing is that my network connection is set to 10 half mode and is displaying the yello triangle with "limited or no connectivity" on the bottom right hand corner of my pc...is that normal?

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

is all above board?all correct?

the only other thing is that my network connection is set to 10 half mode and is displaying the yello triangle with "limited or no connectivity" on the bottom right hand corner of my pc...is that normal?

---

probably not right click and repair.

dns server: 192.168.000.003

and default gateway: 192.168.000.003

then restart network dbox on and connect

---

Originally posted by SCOTTC32:

---

Originally posted by SCOTTC32:

---

hi evry1 i have a few questions,i have looked through this thread but cant seem to find the answers that i want if any1 could help id be very grateful
i have a n****a d**x2 running on sportster 1.6 uk01 on VM & im in manchester
firstly when this first happened i (like a lot of us) rescanned the box do i now need to reflash it?
i have tried entering keys i have deleted the old ones & now have nothing at all in the keylist file could anyone tell me exactly what the keys should start with N???? & the time,date & rom no
i have read that you need to have rom7 enabled & all the rest disabled how exactly do i do this?
ive downloaded the bigmaq toolbar how do i know what codes to use for my area (vm in manchester)pure n*l or ex c*w?
do you have to subscribe to the minimum package to get all this to work? i know that this sound like a stupid question its just that my box was working perfectly well for well over a year after i got cut off & its only now that i have had any problems!(my internet is still on LOL! so i should still be getting a signal???)
im goin to pick up a cable 2moz to connect my box to pc (in case i need to flash) what cable do i need exactly? ive read about null modem & crossover cables but how will i know which to use? do they connect to ethernet or rs232 on back of box? is there a cable that i can connect to my box that plugs into the usb port?
any help that could at least get me up & running for now would be very much appreciated any answers to any of my question & id be very grateful
many thanks in advance & sat here fingers crossed please help!!!!!

Originally posted by bryandir:

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

is all above board?all correct?

the only other thing is that my network connection is set to 10 half mode and is displaying the yello triangle with "limited or no connectivity" on the bottom right hand corner of my pc...is that normal?

---

probably not right click and repair.

dns server: 192.168.000.003

and default gateway: 192.168.000.003

I am having the exact same problem, could it be that the username and password ase different, i am have a sagem d-box

then restart network dbox on and connect

---

i have the sttings under "test dbox" all o..the dbox is (pinging) along with the dns sever and default gateway.

help!!!!

---

Originally posted by fitballer:

---

Originally posted by bryandir:

---

Originally posted by steo2k8:

---

Originally posted by bryandir:

---

is all above board?all correct?

the only other thing is that my network connection is set to 10 half mode and is displaying the yello triangle with "limited or no connectivity" on the bottom right hand corner of my pc...is that normal?

---

probably not right click and repair.

dns server: 192.168.000.003

and default gateway: 192.168.000.003

I am having the exact same problem, could it be that the username and password ase different, i am have a sagem d-box

then restart network dbox on and connect

---

i have the sttings under "test dbox" all o..the dbox is (pinging) along with the dns sever and default gateway.

help!!!!

---

---

Originally posted by splint64:

---

Originally posted by oggnogg:

---

Originally posted by splint64:

---

Originally posted by oggnogg:

---

---

If ya go into my link below you will get a image for virgin flash it with that make sure your connected to the box via FTP make sure your ip on your box and pc aint the same when your flashing a new image via FTP the old shit will replace the new image if your using flash assit it will erase all the old stuff too then create it auto not sure if i have Service & boq files there too but wont be hard to find

---

Hi tried this today and got the image flashed...bit pink but ok! Then ran into a problem in that I can't connect (FTP) to the box now. I have all the same settings but the box doesn't have an IP and when I put one in it says "unreachable" or "socket error". Pretty sure set up at the PC end is the same. Scanning with this image didn't work (it still says CableDeutschland and I can't transfer a services xml file.)

Cheers.

---

Hi thanks to ogg and others for helping, I've learned a bit about my dbox now! Have succesfully flashed a new image (the laky-pro one) and now all is working ok. Channels are mucked up so I could use an up-to-date services.xml and bouquets, otherwise job done!

Originally posted by splint64:

---

Hi thanks to ogg and others for helping, I've learned a bit about my dbox now! Have succesfully flashed a new image (the laky-pro one) and now all is working ok. Channels are mucked up so I could use an up-to-date services.xml and bouquets, otherwise job done!

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

Originally posted by turner123:

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

if you are going to use a null you need it a usb to rs232 convertor n then prob a genger changer female to female so it can go into the dbox (dbox is male) then in to ur usb ,thats only if you dont have a null socket on your pc

i got mine from cpc

---

Originally posted by turner123:

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

http://www.maplin.co.uk/Search.aspx?criteria=VD76H&DOY=#DOY

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

if you are going to use a null you need it a usb to rs232 convertor n then prob a genger changer female to female so it can go into the dbox (dbox is male) then in to ur usb ,thats only if you dont have a null socket on your pc

i got mine from cpc

---

Originally posted by turner123:

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

if you are going to use a null you need it a usb to rs232 convertor n then prob a genger changer female to female so it can go into the dbox (dbox is male) then in to ur usb ,thats only if you dont have a null socket on your pc

i got mine from cpc

---

Originally posted by SCOTTC32:

---

Originally posted by turner123:

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

No problem someone will be here to help ya out

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

if you are going to use a null you need it a usb to rs232 convertor n then prob a genger changer female to female so it can go into the dbox (dbox is male) then in to ur usb ,thats only if you dont have a null socket on your pc

i got mine from cpc

---

thanks v much guys youre the first people to reply to any of my questions!! looks like a trip to maplin 4 me 2moro! if i get stuck with anything would any of you mind helping me out? i,d be very grateful ive already downloaded ftp & the fix from steo2k8,s link (the right one i hope)
cheers in advance

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

Originally posted by SCOTTC32:

---

Originally posted by splint64:

---

Originally posted by SCOTTC32:

---

hi people ive looked on maplin site for a null modem cable now i know that this looks like it connects to the rs232 on the back of the dbox but where do i connect it on my pc? the only connection on the motherboard outputs that looks like the rs232 is the one that my monitor used to use before i put a graphics card in is this the right connection to use?
please stop watching your working again boxes (yes i admit im jealous LOL !!) & please reply so that i can get my box up & running again
thanks in advance

---

I got my box working ok using just a crossover (ie. ethernet) cable and FTP, no null cable reqired. If you have an image you should be able to work it out by looking back at threads and at tutorials for FTPing. If you need to flash the whole thing you can do it this way.

---

splint 64 just thought could i use any ethernet cable ie from my ps3 or are they different to the one i need?

---