|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
bryandir
Member
|
14. April 2008 @ 16:01 |
Link to this message
|
Originally posted by bryandir:
Originally posted by steo2k8:
Originally posted by bryandir:
hi sll,,,,i have tried all of the above ancannot connect to my dbox...any settingsi need to adjust?
cheers!!
change the box ip to
192.168.000.003
and the two dns to the same
pick start\restart network on the box and then try to connect
hi...what are the "two dns"?are they the two ip adress bellow the boxs ip adress?
so should have one ip that reads
192.168.000.003
and the other two shouls be different from this,but the same digits?
cheers guys!!
any help guys?please?pretty please?
|
|
Advertisement
|
 |
|
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:01 |
Link to this message
|
Originally posted by dbox101:
any permanent solution to resolve the keys issue?
anyways i have tried to update the keys that i got from Bigmaq tool bar, but i was unable to change or update them using my box, is it easy to do them with FLASH FTP if it is can you guys tell me how to do so?
posted plenty of times:
http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html
unzip and ftp it to var\keys
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:03 |
Link to this message
|
Originally posted by bryandir:
any help guys?please?pretty please?
just put everything the same and pick restart network above the ip
This message has been edited since posting. Last time this message was edited on 14. April 2008 @ 16:04
|
|
asd36
Junior Member
|
14. April 2008 @ 16:03 |
Link to this message
|
|
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:05 |
Link to this message
|
Originally posted by asd36:
inkedmoto.You will need a ethernet crossover patch cable and a nullmodem cable(both available from maplin).Then u need the following software
dboxifa download here http://www.4shared.com/dir/6490597/a021d3df/sharing.html
you don't actually need a null i flashed plenty of times without it
|
|
turner123
Suspended permanently
|
14. April 2008 @ 16:08 |
Link to this message
|
Originally posted by steo2k8:
Originally posted by asd36:
inkedmoto.You will need a ethernet crossover patch cable and a nullmodem cable(both available from maplin).Then u need the following software
dboxifa download here http://www.4shared.com/dir/6490597/a021d3df/sharing.html
you don't actually need a null i flashed plenty of times without it
yea your rite but if your in kein system you do need the null as the box dont have an ip no more (worst case)lol
|
|
inkedmoto
Newbie
|
14. April 2008 @ 16:10 |
Link to this message
|
Originally posted by asd36:
inkedmoto.You will need a ethernet crossover patch cable and a nullmodem cable(both available from maplin).Then u need the following software
dboxifa download here http://www.4shared.com/dir/6490597/a021d3df/sharing.html
Thanks for the info. A friend of mine change the code for me but I wasnt there to see him do it.
I think he said something about turning auto update off(?)
I have no idea how to change any codes.
All I know is, press blue, then go into Tux box com and go into Keys. Thats about as far as I can get with anything.
I know the code is:
6F 9B A2 32 50 67 36 57
Do you or anyone know how to change the code to that?
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:12 |
Link to this message
|
Originally posted by turner123:
Originally posted by steo2k8:
Originally posted by asd36:
inkedmoto.You will need a ethernet crossover patch cable and a nullmodem cable(both available from maplin).Then u need the following software
dboxifa download here http://www.4shared.com/dir/6490597/a021d3df/sharing.html
you don't actually need a null i flashed plenty of times without it
yea your rite but if your in kein system you do need the null as the box dont have an ip no more (worst case)lol
it happened me but i used ifa and have no nullmodem
|
|
paul_here
Junior Member
|
14. April 2008 @ 16:13 |
Link to this message
|
|
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:15 |
Link to this message
|
Originally posted by inkedmoto:
Originally posted by asd36:
inkedmoto.You will need a ethernet crossover patch cable and a nullmodem cable(both available from maplin).Then u need the following software
dboxifa download here http://www.4shared.com/dir/6490597/a021d3df/sharing.html
Thanks for the info. A friend of mine change the code for me but I wasnt there to see him do it.
I think he said something about turning auto update off(?)
I have no idea how to change any codes.
All I know is, press blue, then go into Tux box com and go into Keys. Thats about as far as I can get with anything.
I know the code is:
6F 9B A2 32 50 67 36 57
Do you or anyone know how to change the code to that?
go to keylist under keys and press 4 (NOT OK)
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:18 |
Link to this message
|
Originally posted by paul_here:
http://www.4shared.com/file/44097811/d137a23b/sportster_uk_1.html
what is this file its unidentified
now download it its .img image file for the dbox2
|
|
inkedmoto
Newbie
|
14. April 2008 @ 16:23 |
Link to this message
|
Originally posted by steo2k8:
go to keylist under keys and press 4 (NOT OK)
Thanks bro. Will this also turn off auto update or don't I need to touch that?
|
|
buncrana
Newbie
|
14. April 2008 @ 16:24 |
Link to this message
|
Thanks to edz77 and everyone else for all their help. surprised myself but followed edz's instructions for my Sagem box and all back on-hopefully to stay!
If I can do it anyone can!!
|
|
MIYBase
Suspended due to non-functional email address
|
14. April 2008 @ 16:28 |
Link to this message
|
hi.
ive tried so hard to get into the box, i even watched someone do it, but i still cant get into the box to flash it!!
I went to the directory var/keys but in that file i cant find keylist.txt
i have sportster 1.7
could anyone help me out?
thanks
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:30 |
Link to this message
|
Originally posted by inkedmoto:
Originally posted by steo2k8:
go to keylist under keys and press 4 (NOT OK)
Thanks bro. Will this also turn off auto update or don't I need to touch that?
if you ftp the new nagrarom7 it will auto update.
you need flash fxp click ftp to get it.
then get the rom:
http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html
put it under var\keys
|
|
nelsal
Junior Member
|
14. April 2008 @ 16:30 |
Link to this message
|
npjenkins
|
|
bryandir
Member
|
14. April 2008 @ 16:30 |
Link to this message
|
Originally posted by steo2k8:
Originally posted by bryandir:
any help guys?please?pretty please?
just put everything the same and pick restart network above the ip
i have done all of the above with the network settings on the dbox....
i still get connection failed..
heres what im doing...
1)plug network cable into laptop.
2)plug dbox in to wall,and switch on.
3)open flashfxp
4)click on nagrarom7 file and click "quick connect.
5)enter the adress id as bove 192.168.000.003
6)user/password root and dbox2 (lower case)
7)click connect......and all i get is
WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #2
help?
|
|
fitballer
Junior Member
|
14. April 2008 @ 16:35 |
Link to this message
|
Originally posted by bryandir:
Originally posted by steo2k8:
Originally posted by bryandir:
any help guys?please?pretty please?
just put everything the same and pick restart network above the ip
i have done all of the above with the network settings on the dbox....
i still get connection failed..
heres what im doing...
1)plug network cable into laptop.
2)plug dbox in to wall,and switch on.
3)open flashfxp
4)click on nagrarom7 file and click "quick connect.
5)enter the adress id as bove 192.168.000.003
6)user/password root and dbox2 (lower case)
7)click connect......and all i get is
WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #2
help?
I have the same problem, i am using an ethernet cable is this the problem?
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:37 |
Link to this message
|
Originally posted by bryandir:
Originally posted by steo2k8:
Originally posted by bryandir:
any help guys?please?pretty please?
just put everything the same and pick restart network above the ip
i have done all of the above with the network settings on the dbox....
i still get connection failed..
heres what im doing...
1)plug network cable into laptop.
2)plug dbox in to wall,and switch on.
3)open flashfxp
4)click on nagrarom7 file and click "quick connect.
5)enter the adress id as bove 192.168.000.003
6)user/password root and dbox2 (lower case)
7)click connect......and all i get is
WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #2
help?
are the wires tight and did you definately pick restart network. mine worked when i did that. try writing this as the server
192.168.0.3 wthout the multiple zeros
and port = 21
proxy = default
This message has been edited since posting. Last time this message was edited on 14. April 2008 @ 16:39
|
|
nelsal
Junior Member
|
14. April 2008 @ 16:38 |
Link to this message
|
|
wish it was someone who can msn me and help me get this dbox2 sportster up and running i must be nearly there have dun loads now its going wrong for me anyone available who can help? and got theres working....i have dbox2 sportster pro from southwales
npjenkins
|
Senior Member
2 product reviews
|
14. April 2008 @ 16:42 |
Link to this message
|
Originally posted by nelsal:
Originally posted by steo2k8:
steo its coming up cant open mtd device wat do i do...am so grateful for this
try flashing this and do a uk scan
http://www.4shared.com/file/44097811/d13...tml
this file want do anything something wrong with it
ok nelsal. pm me and i'll pm you back. there are too many posts and i don't notice your new ones.
|
|
nelsal
Junior Member
|
14. April 2008 @ 16:43 |
Link to this message
|
Originally posted by steo2k8:
Originally posted by nelsal:
Originally posted by steo2k8:
Originally posted by nelsal:
hi steo cheers man have dun wat u said wat do i do next after this
put this file in var\keys while you have flash fxp set up
unzip it first (rar)
http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html
then leave it on a black channel for a few seconds (about 30) and see if it comes on.
if error channel not availible comes up on all channels do a scan with fast scan off.
steo its coming up cant open mtd device wat do i do...am so grateful for this
try flashing this and do a uk scan
http://www.4shared.com/file/44097811/d13..._1.html
npjenkins
|
|
bryandir
Member
|
14. April 2008 @ 16:44 |
Link to this message
|
Originally posted by steo2k8:
Originally posted by bryandir:
Originally posted by steo2k8:
Originally posted by bryandir:
any help guys?please?pretty please?
just put everything the same and pick restart network above the ip
i have done all of the above with the network settings on the dbox....
i still get connection failed..
heres what im doing...
1)plug network cable into laptop.
2)plug dbox in to wall,and switch on.
3)open flashfxp
4)click on nagrarom7 file and click "quick connect.
5)enter the adress id as bove 192.168.000.003
6)user/password root and dbox2 (lower case)
7)click connect......and all i get is
WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #2
help?
are the wires tight and did you definately pick restart network. mine worked when i did that. try writing this as the server
192.168.0.3 wthout the multiple zeros
and port = 21
proxy = default
heres my settings
start network boot:on
dchp off
ip adress,subnet mask,broadcast,all 192.168.0.3
default gateway(never touched this) 192.168.1.1
dns server 192.168.1.1
anything wrong there you can spot?
cheers!
|
|
fitballer
Junior Member
|
14. April 2008 @ 16:46 |
Link to this message
|
Originally posted by steo2k8:
Originally posted by bryandir:
Originally posted by steo2k8:
Originally posted by bryandir:
any help guys?please?pretty please?
just put everything the same and pick restart network above the ip
i have done all of the above with the network settings on the dbox....
i still get connection failed..
heres what im doing...
1)plug network cable into laptop.
2)plug dbox in to wall,and switch on.
3)open flashfxp
4)click on nagrarom7 file and click "quick connect.
5)enter the adress id as bove 192.168.000.003
6)user/password root and dbox2 (lower case)
7)click connect......and all i get is
WinSock 2.0 -- OpenSSL 0.9.8g 19 Oct 2007
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Retry attempt Aborted
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #1
[R] Connecting to 192.168.000.003 -> IP=192.168.0.3 PORT=21 (attempt # 1)
[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect attempt #2
help?
are the wires tight and did you definately pick restart network. mine worked when i did that. try writing this as the server
192.168.0.3 wthout the multiple zeros
and port = 21
proxy = default
I dont see the option restart network in the network settings, am i doing something wrong?
|
|
Advertisement
|
|
|
|
paul_here
Junior Member
|
14. April 2008 @ 16:46 |
Link to this message
|
|
Thank you all
my sportster 1.7 and updated var/keys file has worked.
thank you for your help
|
