|
Tutorial - Make Your Nintendo Wifi USB Connector A SoftAP
|
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 10:04 |
Link to this message
|
|
NO maybe you don't have the right mac. You find this in the wifi connectins setup under options onthe DS. Click options and then under system information.
|
|
Advertisement
|
|
|
|
|
.com.au
Junior Member
|
7. January 2007 @ 10:06 |
Link to this message
|
Originally posted by kcajblue:
you dont get the MAC Address from a game you get it from the internet settings on the DS.
Hi,
You go to wifi connection settings and select options then system info and ther is your mac address that i enter into access control and select allow.
Shane
Ps"sorry for being a noob
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 10:08 |
Link to this message
|
Quote:
Originally posted by wdclean:
no your internet connection should be open
Data Encrytion DISABLED
Network name DEFAULT
Channel 1
Give this a try
Hi,
Do i have to hide ssid?
Also should enable ICS be ticked or unticked and my internet connection should be there also correct?
Shane
The ssid is default and not clicked.
The ics is clicked
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 10:11 |
Link to this message
|
Quote:
Originally posted by kcajblue:
you dont get the MAC Address from a game you get it from the internet settings on the DS.
Hi,
You go to wifi connection settings and select options then system info and ther is your mac address that i enter into access control and select allow.
Shane
Ps"sorry for being a noob
You got it! I would be faster but the 3 min. rule
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 10:15 |
Link to this message
|
|
Well are you up and running....
|
|
.com.au
Junior Member
|
7. January 2007 @ 10:17 |
Link to this message
|
|
Hi,
Tried it all.
Maybe i should delete the ds mac address and try to obtain another do you think that will work?
Shane
|
Senior Member
|
7. January 2007 @ 10:19 |
Link to this message
|
|
using a different mac address wont work.
is your access control policy on accept or reject.
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 10:23 |
Link to this message
|
|
I think the mac is asigned to your DS. Go back into the soft ap tab and make sure you've clicked the soft ap mode setting
|
|
.com.au
Junior Member
|
7. January 2007 @ 10:23 |
Link to this message
|
Originally posted by kcajblue:
using a different mac address wont work.
is your access control policy on accept or reject.
Hi M8,
Its on accept and i double checked the letters and numbers are correct.
Shane
|
Senior Member
|
7. January 2007 @ 10:26 |
Link to this message
|
|
im pretty sure youve seen the pictures of my settings on the first page.
did you try them.
|
|
.com.au
Junior Member
|
7. January 2007 @ 10:29 |
Link to this message
|
|
Hi,
Yep tried them but am now trying with channel 1 and name default but still says "no comp access point" or something like that.
I just sent you a pm as i must go to work but will try when i get home.
Thanks heaps for your help so far.
Im determined to get it to work.
Cheers Shane
|
Senior Member
|
7. January 2007 @ 10:36 |
Link to this message
|
|
lol. your PM was the same as your post.
the problem could be with your computers IP and your NWUSBC
|
|
.com.au
Junior Member
|
7. January 2007 @ 10:47 |
Link to this message
|
Originally posted by kcajblue:
lol. your PM was the same as your post.
the problem could be with your computers IP and your NWUSBC
Hi,
I have asdl and when i reset the modem always get a new ip address.
Also what is NWUSBC?
Cheers Shane
|
Senior Member
|
7. January 2007 @ 11:03 |
Link to this message
|
Quote:
Originally posted by kcajblue:
lol. your PM was the same as your post.
the problem could be with your computers IP and your NWUSBC
Hi,
I have asdl and when i reset the modem always get a new ip address.
Also what is NWUSBC?
Cheers Shane
what is asdl.
do you have a dynamic ip address.
Nintendo
Wifi
USB
Connector
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 11:52 |
Link to this message
|
Quote:
Originally posted by kcajblue:
lol. your PM was the same as your post.
the problem could be with your computers IP and your NWUSBC
Hi,
I have asdl and when i reset the modem always get a new ip address.
Also what is NWUSBC?
Cheers Shane
No this wouldn't make any differance as the usb is only an access though your already established network connection. I'll run down everything I can think of and post later. Maybe if its all together it'll be easyer to follow.
WD.
|
|
wdclean
Suspended due to non-functional email address
|
7. January 2007 @ 13:03 |
Link to this message
|
|
For anyone interested on how your network and DS should be set up to run on a open network ...heres how
Under The Asus WLAN Card Setting
Click on Config on the left side.
Basic Tab:
Network Type:Infrastructure
Network Name:default
Channel : 1
Encryption Tab:
Network Authentication: Open
Data Encrption: Disabled
Soft AP Tab:
Check The Soft AP Mode
Check To Enable The ICS
Access Control Tab:
Access Control Policy: Accept
Access Control List: This is were you input your mac address of your DS found under Nintendo WFC Settings,Options,System Information there you'll find your Mac Address 00-00-00-00-00-00 eg. Just note this is were you would input additional hardware addresses as well ( PSP, Laptop Eg.). Then of coase you click add. Now you'll see that same address under the list of Mac Addresses Allowed To Be On The Network.
Now go back to the basic tab and click on advanced make sure under the 54g Mode its 802.11b only. All the other settings should not to be touched.But if you want to know here's what mine are set to.
RTS Threshold: 2347
Fragmentation Threshold: 2347
Preamble Mode: Long
Frame Bursting: Disabled
54g Mode: 802.11b only
54g Protection: Auto
Use Short Slot Time: Disabled
Important after making any adjustments to click on OK on the bottom left before closing tab.
Ok try your DS by going into nintendo WFC, then nintendo WFC Settings,Nintendo WiFi Connectin Settings. Erase all previous settings. Now pick a connection 1,2 or 3 now search for access point, after a few moments it should come up with a screen showing a default connection thats unlocked and a signal, Click OK. It will show a new Connection 2 Settings screen press OK again and it will set up your DS connection for you. After its done it should say connection successful and then go back to the Connection setup screen. Now just back out and your ready to Play. If you wanted to go into the connection setup screen again ,you'll see that the connection you choose has changed the erase settings to yellow from white meaning its saved. Now Go Have Fun !!!!
Any problems I'll try to help you figure it out.
WDCleancut
|
|
.com.au
Junior Member
|
7. January 2007 @ 21:37 |
Link to this message
|
|
Hi m8,
Thanks heaps for your help so far i really really appreciate it.
When i try to search for an access point it says "No access point in range".
What should i do now?
Cheers Shane
|
|
.com.au
Junior Member
|
7. January 2007 @ 22:26 |
Link to this message
|
Originally posted by .com.au:
Hi m8,
Thanks heaps for your help so far i really really appreciate it.
When i try to search for an access point it says "No access point in range".
What should i do now?
Cheers Shane
UPDATE......I got it working thanks to you.
I think what i did instead of 802.11b i put 802.11g and it worked.
Thank you very very very much.
Your time is appreciated muchly.
I owe you big time.
Cheers Shane
|
|
.com.au
Junior Member
|
8. January 2007 @ 09:33 |
Link to this message
|
|
Hi,
Im having a small problem now trying to connect with beup rein 16 version.
Im getting the error "ssl connect failed" , "Authentication Failed".
Does anyone know how to fix this?
Also beup seems to corrupt my memory card.
After loading the first time then it wont load properly again in the m3 mini sd version.
Anyone had this problem?
Cheers Shane
This message has been edited since posting. Last time this message was edited on 8. January 2007 @ 09:53
|
|
wdclean
Suspended due to non-functional email address
|
8. January 2007 @ 12:26 |
Link to this message
|
|
Could you give a little more detail please,
WD.
|
|
wdclean
Suspended due to non-functional email address
|
8. January 2007 @ 12:37 |
Link to this message
|
Originally posted by .com.au:
Hi,
Im having a small problem now trying to connect with beup rein 16 version.
Im getting the error "ssl connect failed" , "Authentication Failed".
Does anyone know how to fix this?
Also beup seems to corrupt my memory card.
After loading the first time then it wont load properly again in the m3 mini sd version.
Anyone had this problem?
Cheers Shane
I'm not up on these devices but if I were you I'd Google it "beup rein 16 version" and you will find the anwsers you seek. "Google a look into the unknown"
Cheers, WD.
|
|
borregr
Newbie
|
11. January 2007 @ 14:24 |
Link to this message
|
|
anyone know if it is possible to change the mac address of the nintendo wifi usb adapter? or if there is a way to automatically change it to your pc mac address? thanks.
-bob-
|
|
wdclean
Suspended due to non-functional email address
|
11. January 2007 @ 14:49 |
Link to this message
|
Originally posted by borregr:
anyone know if it is possible to change the mac address of the nintendo wifi usb adapter? or if there is a way to automatically change it to your pc mac address? thanks.
Yes you can change it but not to your pc mac address it has to be something else, windows will do this for you. Remember if you change the address everything else hooked though this connection will be affected. Usually the last couple of numbers are ajusted one up. Here's my ? why would you want to change the mac address on the usb anyways. If your having trouble let me know with what step.
Cheers, WD
|
|
borregr
Newbie
|
11. January 2007 @ 15:01 |
Link to this message
|
Quote:
Originally posted by borregr:
anyone know if it is possible to change the mac address of the nintendo wifi usb adapter? or if there is a way to automatically change it to your pc mac address? thanks.
Yes you can change it but not to your pc mac address it has to be something else, windows will do this for you. Remember if you change the address everything else hooked though this connection will be affected. Usually the last couple of numbers are ajusted one up. Here's my ? why would you want to change the mac address on the usb anyways. If your having trouble let me know with what step.
Cheers, WD
im in college, and in order for a comptuer to be able to connect ot the net it has to go through some tests detecting if your computer has antivirus software. a device like a router is not capable of passing the test, but if you change the routers mac address to the computers, the server things the router is the comptuer, and allows it to connect.
-bob-
|
|
Advertisement
|
|
|
|
wdclean
Suspended due to non-functional email address
|
11. January 2007 @ 15:28 |
Link to this message
|
|
Your usb connector is using your computers access to the net and doing this in your PC and as long as your PC has access then your good to go. The mac address of the usb has no bearing on your internet connection. Its just providing your computer a wireless access point.
|
