Full Guide to Gamecube Backup/Booting
|
|
dig1tal
Suspended due to non-functional email address
|
13. October 2004 @ 03:25 |
Link to this message
|
this might be an alternate solution, if not mentioned already:
MAX Drive Pro is the ultimate solution for the homebrew GameCube programmer.
At last you can transfer data between your GameCube and PC?quickly and easily!
The system consists of 3 components ? the MAX Drive Pro cartridge, USB cable and the Loader Disc.
The MAX Drive Pro cartridge is an 8MB (64 Megabit) memory card for GameCube with a built-in high speed USB port. Using the supplied USB cable, files can be easily transferred between the card and any USB-enabled PC.
The Loader Disc boots on any GameCube from any region, and loads files from the MAX Drive Pro cartridge. Files are displayed in a simple file structure and any executable files are pre-loaded and run.
* Massive 8MB/64Mb GameCube memory card with built-in high speed USB port (USB cable supplied)
* Over 1000 blocks of game save data - 16 times the size of a standard GameCube memory card
* Run executable files on a GameCube
* A must have for the homebrew GameCube programmer
* Simply drag and drop PC files onto the MAX Drive Pro cartridge
* Works on any GameCube from any region
http://uk.codejunkies.com/shop/product.asp?l=1&r=1&c=GB&cr=GBP&cs=%A3&ProdID=297
|
Advertisement
|
|
|
sakura123
Newbie
|
13. October 2004 @ 03:29 |
Link to this message
|
I mentioned that a long time ago and everyone ignored me. I would be neat if you could launch an app off of it that just establishes the connection with the pc at the full bandwidth.
|
swloco
Newbie
|
13. October 2004 @ 14:49 |
Link to this message
|
Can someone please clarify the following things for me. Thanks
hi, guys i just recently stumbled upon this thread.
I thought it was really amazing how people are able to burn/play gamecube games.
I dont know much about ripping and stuff so i have a couple of questions...
1.What is CAT-5 converter cable? Do they come with a gamecube/pc? if no are they easily available to be bought?
2.Can you guys please give a generalization of how well most games run
|
muhmann
Junior Member
|
15. October 2004 @ 08:05 |
Link to this message
|
Is this thing with the USB-cable only made for hombrew files or can I also play backuped GCN disks?
|
coolcono
Newbie
|
16. October 2004 @ 18:37 |
Link to this message
|
Icemonkey,
could you help me figure out how to use psul v1.1. All it does is run really fast and close. When I try to cmd it, it says it is not an applicable program.
Please help.
|
Icemonkey
Senior Member
|
18. October 2004 @ 12:47 |
Link to this message
|
coolcono:
Please start a new thread for this issue since this one is getting pretty long. Also need more information such as what Windows version you are running and how are your network adapter(s) setup (i.e., how many and what IP addresses are you using).
PS2 - v8
Mod - Magic V
Burner - CenDyne (Pioneer) DVR-A05
Media - Anything Cheap
Gamecube w/Broadband Adapter
Phantasy Star Online
Animal Crossing Loader v1.4
Phantasy Star Uploader v1.1
Gamecube ISO Ripping Server v1.0.0.29
|
GanYueHui
Newbie
|
20. October 2004 @ 21:15 |
Link to this message
|
After I have the Gamecube Backup file of my game on my harddrive, can I can burn it on to a mini 1.4GB DVD-R disk that is the same size as the Gamecube game. Even if I can burn it on the disk, will it run on the gamecube? If the original gamecube system dosen't read mini DVD-R format, dose the the Pansonic Version of the Gamecube reads DVD+R or DVD-R formats? Before I make an investment to get the hardward and discs, it is possible at all to run backup gamecube games? I greatly appreaciate all your professional advices.
|
muhmann
Junior Member
|
22. October 2004 @ 08:39 |
Link to this message
|
You can burn the ripped GCN-Files on am mini-DVD but the GCN isn't able to boot them. The Panasonic cube is, I think.
Running backup files via BBA is another thing, some people can manage it and get it running, others don't.
I tried it and all the games that worked were awfully choppy and not really playable.
|
GanYueHui
Newbie
|
22. October 2004 @ 21:33 |
Link to this message
|
Is there a modchip for gamecube available?
|
muhmann
Junior Member
|
22. October 2004 @ 23:21 |
Link to this message
|
Yes, there is am modchip available but it is only for playing NTSC Games on a PAL GCN. There's no modchip available for playing copied games.
|
poldoman
Suspended due to non-functional email address
|
23. October 2004 @ 09:45 |
Link to this message
|
this works with pso 3 ?
ciao
This message has been edited since posting. Last time this message was edited on 23. October 2004 @ 09:45
|
murph1083
Newbie
|
23. October 2004 @ 11:48 |
Link to this message
|
all I see out is PSO I&II plus....will that work?
|
mab2
Suspended due to non-functional email address
|
24. October 2004 @ 17:50 |
Link to this message
|
Where can I really find a gamecube .dol file or whatever you need to run a game. This is very confusing. And do you or do you not know of a gamecube file that can be downloaded? Do any of these files actually work? All of the links on this site that claim to have a gamecube file, simply do not have any gamecube files! The only thing I could find is a site that had files that were far too small too even have a single level of a game unless you were playing a NES game. Personally I think that they do not exist and you are all making this up because you want someone to use the gamecube emulater. That does not have any game downloads period. I think it is all a big joke! If you have any information to prove me wrong I would like to see it. But right now I think you are all liars!
|
mab2
Suspended due to non-functional email address
|
24. October 2004 @ 17:54 |
Link to this message
|
Thanks for the info. But Can you send me a link of a gamecube full download. That is not 88k or 500k. because that simply is far too small to have even a single level of a game. I would think it would have to be at least 50 MB or more.
|
mab2
Suspended due to non-functional email address
|
24. October 2004 @ 17:56 |
Link to this message
|
Ok where is this site where I can possibly get the files from?
|
mab2
Suspended due to non-functional email address
|
24. October 2004 @ 18:19 |
Link to this message
|
The file given to the download files are .gci. But this only gives you a blank screen. And the bottom of the screen dispalys ready. But I need a .dol .elf ending file name to run the game. Where can I get a download for .dol or .elf.
|
GanYueHui
Newbie
|
3. November 2004 @ 14:02 |
Link to this message
|
If I use GameCube FreeLoader v1.06b, can I load and play the mini-DVD disc with the gamecube backup files?
|
ssjowowo
Junior Member
|
3. November 2004 @ 22:22 |
Link to this message
|
hi people..new here. sorry for asking this but i've searched the entire forum without finding the answer to my problem. some people have asked this before but didn't get an answer. i'm loading psul and when it tries to connect with the gamecube it keeps saying
Starting sever on 192.168.1.100
Waiting for connection
Served DNS query from 192.168.1.32...
and stays there while the gamecube outputs an error 101. what am i doing wrong??? pls help..i'm despared..
|
indienemo
Account closed as per user's own request
|
4. November 2004 @ 08:40 |
Link to this message
|
Same sort of problem happened to me, icemonkey helped me out and now Im an expert (*evil smile*), I still have icemonkey's tips saved on my PM inbox so PM me and I will copy and paste to you, if you so desire..
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
This message has been edited since posting. Last time this message was edited on 4. November 2004 @ 08:42
|
indienemo
Account closed as per user's own request
|
4. November 2004 @ 08:40 |
Link to this message
|
sorry double post.. :(
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
This message has been edited since posting. Last time this message was edited on 4. November 2004 @ 08:41
|
Duckman89
Newbie
|
4. November 2004 @ 19:09 |
Link to this message
|
Hi, i have pso 1&2 plus, i thought it was wrong but i still got it, sigh,... so now i cant get it working, is there anyway to do this???? please anyone just answer this for everyone, thanx
|
Neok
Suspended due to non-functional email address
|
6. November 2004 @ 04:55 |
Link to this message
|
Hi all , new here
this nethod seems quite old are there any new ways
e.g using a bios or dashboard wouldnt it be possible to connect to the gc via usb and has frreeloader any possible help to booting things
|
Bizquick
Junior Member
|
9. November 2004 @ 19:57 |
Link to this message
|
Hey I think I need some help making this work. I got too far ahead of my self and didn't read that there are 2 diffrent versions of this PSO I&II. I didn't know that there was a differance on this Plus edition. Anyway I can't seam to make this work following all the directions I have found. so I'm gussing that is has somthing to do with this PSO Plus edition. can anyone help me make it work or should I just go trade it in on the older version because the EB game place has one just down the street I could just do a trade in and maybe pay like 10 or 15 bux. And if so will I need to go thru and make a new file or will it work on that save file?
|
bigflavor
Junior Member
|
12. November 2004 @ 17:02 |
Link to this message
|
DNS problem:
ah... i'm getting a weird error, or no error i mean... it just doesn't save... PSUL resolves the dns request, but doesn't save the info to the gamecube.
I'm using PSO I&II plus...
I heard this may not allow the operation.
Say it ain't so...
Then I'd have to return the game, aka sell it back at 5% of the price I paid for it; and track down PSOI&II (not plus).
bizquick... this applies to you as swell
This message has been edited since posting. Last time this message was edited on 13. November 2004 @ 07:01
|
Advertisement
|
|
|
Kyoushu
Suspended due to non-functional email address
|
13. November 2004 @ 07:10 |
Link to this message
|
EDIT: Fixed.
Blah.
This message has been edited since posting. Last time this message was edited on 13. November 2004 @ 07:22
|