|
Eurovox max security
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
AfterDawn Addict
|
16. October 2007 @ 18:46 |
Link to this message
|
Originally posted by geebag:
Could anyone tell me how i would be able to download the channels with the new firmware. In other words im too lazy to do a power scan and then go thru the whole favourite thing. Thanks.
It will not affect your channel order.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
16. October 2007 @ 18:47 |
Link to this message
|
|
It could be the right one , have you flashed a b0x with it before ?
|
AfterDawn Addict
|
16. October 2007 @ 18:50 |
Link to this message
|
Originally posted by mancred:
Originally posted by Celtic71:
If its the rs232 cable it will not work , you need a NULL MODEM CABLE to do this
got the cable free with a digivox not the same no?
Should be but is the USB adapter a USB to serial port adapter are you using XP or vista and have you downloaded the driver for the adapter to your pc? I would flash from a standalone pc as these adapters can cause grief.
Apologies Celt didnt see you there :)
This message has been edited since posting. Last time this message was edited on 16. October 2007 @ 18:53
|
Member
|
16. October 2007 @ 18:52 |
Link to this message
|
|
No, never flashed a box ever on cable theyve always been pre-flashed on arrival, have the 2008 v Eurovox loader up and trying to download with no joy - box incidentally is working fine just trying the digivox out (crap in my book).
Tried the leads out with my technomate and its fine
|
|
geebag
Newbie
|
16. October 2007 @ 18:52 |
Link to this message
|
|
Scouser. Does this mean when i download the firmware all the channels will be there and sorted into favourites.
|
Member
|
16. October 2007 @ 18:55 |
Link to this message
|
|
On xp scouser, and yep put the driver in before hand...
|
AfterDawn Addict
|
16. October 2007 @ 18:55 |
Link to this message
|
Originally posted by geebag:
Scouser. Does this mean when i download the firmware all the channels will be there and sorted into favourites.
If you have them sorted already it will not affect the order they are in. If you havent sorted them this will not do that for you as it is a firmware update not a cdf.
|
AfterDawn Addict
|
16. October 2007 @ 18:55 |
Link to this message
|
No worries Scouser , I'm more than likely stepping on your toes :)
The most common issue when installing the USB adapter and driver is selecting the correct port for your map software to recognize.
You must make sure your particular software is looking on the correct port for it to transfer any data.
To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:
1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected
If you need drivers go here
http://www.gilsson.com/usb_drivers_download.htm
|
AfterDawn Addict
|
16. October 2007 @ 19:05 |
Link to this message
|
|
No probs Celt step away :)
|
AfterDawn Addict
|
16. October 2007 @ 19:07 |
Link to this message
|
|
Just trying to look busy lol :)
|
Senior Member
|
16. October 2007 @ 19:14 |
Link to this message
|
Originally posted by geebag:
Could anyone tell me how i would be able to download the channels with the new firmware. In other words im too lazy to do a power scan and then go thru the whole favourite thing. Thanks.
What i do is load it onto the box and copy the same file back and edit it in the channels and save so if i want to have another one i just use the same file
|
Member
|
17. October 2007 @ 04:23 |
Link to this message
|
|
if i leave the last s/w on ,will it be ok that the one in sept 2.0
if its free it has to be good
|
Member
|
17. October 2007 @ 05:20 |
Link to this message
|
|
read back a few pages, updated my own box ,will leave my mates. i updated about ten the last time they can figure out this one on there own
if its free it has to be good
|
AfterDawn Addict
|
17. October 2007 @ 06:15 |
Link to this message
|
Some areas have reported problems scanning for tps after the update. To get aroung this download a channel dump from your EV before flashing, (then clear channel data), then flash the box. After flash has completed upload your original channel file back to the EV and that should be it.
@ Witko its up to yourself if you want to reflash the September one is fine, but the latest one is quite a noticeable difference.
This message has been edited since posting. Last time this message was edited on 17. October 2007 @ 06:16
|
|
silvereel
Newbie
|
17. October 2007 @ 06:32 |
Link to this message
|
|
Anybody know if there is a plan to release new software for 2007 red box. The new software for the V is excellent
|
Member
|
17. October 2007 @ 06:54 |
Link to this message
|
|
scouser updated my own box its great ,what I was asking is i updated boxes for some mates and hoping they would nt need to be done at once, as long as sept sw works thats fine thanks
if its free it has to be good
|
|
emmanneil
Junior Member
|
17. October 2007 @ 07:01 |
Link to this message
|
|
by channel dump i take it you mean using voxer and saving the channels or am i missing the point here ?
thanks for everything
|
AfterDawn Addict
|
17. October 2007 @ 08:58 |
Link to this message
|
Originally posted by emmanneil:
by channel dump i take it you mean using voxer and saving the channels or am i missing the point here ?
No you got the point CDF = channel dump file use voxer/dnupman whatever your preference.
|
Member
|
17. October 2007 @ 09:59 |
Link to this message
|
|
trying to jtag 2007 box., red one have all the stuff except a 25 pin female connection ,got the jtag set on e bay, whats the connection called and do i use n/m cable with this?
if its free it has to be good
|
AfterDawn Addict
|
17. October 2007 @ 10:06 |
Link to this message
|
Originally posted by WITKO:
trying to jtag 2007 box., red one have all the stuff except a 25 pin female connection ,got the jtag set on e bay, whats the connection called and do i use n/m cable with this?
No you use the Jtag with the Parallel port on your pc, post the fleabay link to show me if your Jtag is correct one.
|
Member
|
17. October 2007 @ 10:16 |
Link to this message
|
|
dont have one using laptop
if its free it has to be good
|
AfterDawn Addict
|
17. October 2007 @ 10:20 |
Link to this message
|
|
Can you borrow one with a parallel port? As I would not advise using any sort of converter.
|
Member
|
17. October 2007 @ 10:22 |
Link to this message
|
|
scouser it was the same link you had a few pages back, everything seems to fit , followed diagrams on disc provided can use my mates comp later
if its free it has to be good
|
AfterDawn Addict
|
17. October 2007 @ 10:25 |
Link to this message
|
|
OK best of luck with it.
|
|
Advertisement
|
|
|
Member
|
17. October 2007 @ 13:45 |
Link to this message
|
|
Hey fellas, i updated my 2008 box woth the October software. But now i have lost E4 AND E4+1! For some reason i do not know why this has happened, i also have lost ITV 2 & 3. I have tried scanning numerous times to no avail. How can i get these back? They are still owrking on my 2007 box. Any help is greatly appreciated. Thanks
|
