Playing PAL PS2 games on an NTSC PS2
|
|
Dany22
Junior Member
|
4. April 2007 @ 08:02 |
Link to this message
|
do u have a modchip or swap magic disk in order to boot the games u burned?? because if u dont have, then thats why it gives you the red screen. u cant simply boot a burned game if your console isn't modified some way either install a direct boot modcip or buy the swap magic disks.
Dany25
Originally posted by BIGDAWG3: HELP! nrk4594 i tried burning Resident Evil 4 and i put it in my7 ps2 slim and it says please insert a playstaion or playstaion 2 disk. i use the PS2 PAL TO NTSC PATCHER WITH Y-FIX V1.06 BETA patch the iso file from dvd decryptor. i am using dvd5's are u supposed to use dvd9's because some games for ps2 arnt dvd9's. i also tried killzone and that didnt work. i followed your directions directly from your post. i have burn through 3 disks trying different things and nothing has worked. (DO U NEED A FAT PS2???) plz email at i'manidiot.com edited by ddp or post back or private message me. i will check for updates. any1 else who can answer my problem plz answer
1)Make an ISO file of the game
a)Download and install DVD Decrypter.
hxxp://fileforum.betanews.com/sendfile/1011845169/1/SetupDVDDecrypter_3.5.4.0.exe
b)Run DVDDecrypter.exe
b)Select Mode-->Iso-->Read
c)For the Source, choose the dvd drive that has the game in it.
d)For the Destination, select a location to save the ISO file.
e)Select File-->Decrypt. This will now create the ISO for the game.
2)Patch the ISO file
a)Download PS2 PAL TO NTSC PATCHER WITH Y-FIX V1.06 BETA
hxxp://www.geocities.com/jayteemaster2003/ps2_pal2ntsc_yfix_source.zip
b)Run ps2_pal2ntsc_yfix.exe
c)Click Browse and select the iso file of the game
d)Select 48 as the Y-Fix offset. You cannot have it perfectly centered because the PAL signal has more lines or resolution than the NTSC signal does. This is as close as you can get. You can raise the offset if you need to see more of the bottom of the screen or you could lower the offset if you want to see more of the top of the screen.
e)I choose to uncheck Make PN Selector
f)Click PATCH FILE. The following screen will pop up.
g)This means that the elf file of the game was backed up to your hard drive. Just click ok and exit the program.
3)Burn the patched ISO file
a)Run DVDDecrypter.exe
b)Select Mode-->Iso-->Write
c)For the Source, locate your patched ISO file. The program patches and overwrites your orignal ISO file. Select your orignal ISO file.
e)For the Destination, select the dvd drive you wish to burn the game.
f)Select your prefered write speed
g)Select File-->Write. This will now burn the game.
|
Advertisement
|
|
|
ddp
Moderator
|
4. April 2007 @ 12:52 |
Link to this message
|
Dany22, edit your sig to conform to forum specs ASAP.
1. Text-only signatures should have at most 5 lines of text.
|
Dany22
Junior Member
|
4. April 2007 @ 13:08 |
Link to this message
|
is it good now?
sorry, I didnt went to this forum for a long time, so i didnt know about the forum specs on the sig :) now i changed it to 1 line only
Also, i would like to add another PAL game to the list.
Demolition Girl (SLES_534.03)
50/60hz Selector: Yes, right after the memory card check screen, u have the option to choose 50hz, 60hz or Test 60hz :)
Originally posted by ddp: Dany22, edit your sig to conform to forum specs ASAP.
1. Text-only signatures should have at most 5 lines of text.
|
ddp
Moderator
|
4. April 2007 @ 13:14 |
Link to this message
|
sig is ok.
|
apac
Inactive
|
7. April 2007 @ 10:58 |
Link to this message
|
thx for the tutorial .. it worked but now i wanted to make an iso file of the game .. just only do tht 1 step .. the game is GOW2 ... so i did as u said in the 1st step and then the file which i decrypt is a RAR file .. i dunno y it isnt an iso file or .. its a rar file but i want to make an iso of the game
niceeee
|
Virex_233
Account closed as per user's own request
|
9. April 2007 @ 08:53 |
Link to this message
|
Hi, has anyone been able to patch Crash Bandicoot : Wrath of Cortex from PAL to NTSC? I tried with the NTSC patcher with yfix, and then the game doesnt load anymore. the game is a cd not a dvd
|
slimer668
Newbie
|
10. April 2007 @ 22:46 |
Link to this message
|
any chance of a reupload of the yfix program? the geocities link does not work.
|
Yaguchi
Member
|
3. May 2007 @ 02:38 |
Link to this message
|
Has anyone patch the PAL version of Spiderman 3?
|
xSpiraL
Newbie
|
4. May 2007 @ 19:37 |
Link to this message
|
guys link is dead!! where else can i get this thing? need to patch!! please help
thanks in advance
|
arbrne246
Newbie
|
5. May 2007 @ 09:45 |
Link to this message
|
Ok i have this proble:
i have the Fast and Furious-Tokyo Drift and its an .iso i got from a torrent site, now thing is its a PAL version to my surprise when i play the game it shows lines and i cant see anything but i can hear it now i have a modded ps2 but i dnt know what chip it has nor can i find out i have that ps2_vfix and i patched it but its still PAL any suggestions on what to do?
|
vapor79
Newbie
|
7. May 2007 @ 20:33 |
Link to this message
|
"Ever dance with the devil in the pale moonlight?"
- Jack Napier (Batman)
|
scab53
Suspended due to non-functional email address
|
13. May 2007 @ 11:14 |
Link to this message
|
does anyone know how to change the language for multi5 ps2 games i patched spiderman3 but it set to french help is appreciated thx
dgdg
|
scab53
Suspended due to non-functional email address
|
13. May 2007 @ 14:17 |
Link to this message
|
Originally posted by ccapitanu: Hello...I am trying to convert a NTSC game dvd that I bought from amazon for my PS2 to PAL because my ps2 only plays PAL dvds. Could you help me out ? Thanks
if u downloaded it u could of used adr patcher to patch then burn it but since bought it u can't convert it
dgdg
|
scab53
Suspended due to non-functional email address
|
13. May 2007 @ 14:57 |
Link to this message
|
Originally posted by nrk4594: try patching using PS2 PAL TO NTSC PATCHER WITH Y-FIX V1.06 BETA. Read the first post in this toipic for more info.
nrk4594 do u now how to change the language for multi5 ps2 games
i patched spiderman3 and it was in french
dgdg
|
landras
Newbie
|
18. May 2007 @ 09:28 |
Link to this message
|
Hi everybody, I could not find anything about patching a game but in order to update the game, like the proevolution soccer, I have the ISO and I have the patch but how should I put the patch together with the ISO? Any good tutorial?
thank you very much
|
phantom76
Newbie
|
21. May 2007 @ 13:39 |
Link to this message
|
Hi, has anyone already successfully converted the PS2 game "brain lara cricket 2007" from PAL to NTSC?..
|
adam31
Newbie
|
21. May 2007 @ 14:39 |
Link to this message
|
Yes with the PAL-NTSC Patcher discussed above 1.06
|
JediaY
Newbie
|
23. May 2007 @ 08:17 |
Link to this message
|
I've been reading this thread so I can fix a vertical (or horizontal) hold problem on my PS2 games. Using a patch program, i was able to fix these games from scrolling across the screen. The only problem is on NHL 07, it hangs up on the NHL 07 start screen. if I run th game that is not patched, the next screen is a select your language screen. Would the patch have deleted this screen to select the language which makes it hang up, or is there another problem that is making it hang up?
I've already waisted about 7 DVDs trying to get this to work, so any help would be nice.
I got the patching software from...
PS2 PAL TO NTSC PATCHER WITH Y-FIX V1.06 BETA
hxxp://www.geocities.com/jayteemaster2003/ps2_pal2ntsc_yfix_source.zip
|
daemon09
Suspended due to non-functional email address
|
23. May 2007 @ 13:02 |
Link to this message
|
Hi im new here but i have read the whole thing on how to patch my
iso but the first i used ps2_pal2ntsc_yfix.exe that method and i
ended up getting ps2 splash screen and then a black one
so i tried the adr_patcher.exe and it froze after a couple of game screens so my question is what did i do wrong
and how do i fix it so i can play it?
i have a duo 3 gold modchip so i can play them
|
Iron87
Newbie
|
29. May 2007 @ 04:16 |
Link to this message
|
what does patching mean/do?
will it be able to play a PAL game on my NTSC/UC console?
if the PAL game was at 50Hz will it play on 60Hz after patching?
Do I need a modchip for this?
|
scab53
Suspended due to non-functional email address
|
29. May 2007 @ 04:20 |
Link to this message
|
patching basicly turns your PAL game to NTSC,or your NTSC to PAL
so it can play on ur PAL or NTSC console
dgdg
|
Iron87
Newbie
|
29. May 2007 @ 04:49 |
Link to this message
|
Do I need to get a modchip?
will I be able to play online? (wont the DNAS reject it?)
|
scab53
Suspended due to non-functional email address
|
29. May 2007 @ 12:07 |
Link to this message
|
i don't know what a dnas is but u need a modchip to play games and if u have or don't have it it doesnt even matter becase u need a network conecter to play online so no u don't need a mod chip to play online but u do need a modchip to play burned games k?
dgdg
|
theVerve
Junior Member
|
15. June 2007 @ 15:33 |
Link to this message
|
Hi has anybody been able to convert NHL2K7 (PAL) to NSTC?
I've followed the guide and used ps2 PAL to NTSC patcher and adr patcher to no avail.
I used 48 and 40 offset for the PAL to NTSC patcher but the screen just goes black and no image can be seen. After a few seconds the screen starts to roll and still no image.
I used adrpatcher but it seems that nothing happened. The screen rolls and the images are in black and white.
I was able to convert darkcloud(PAL) to NTSC
There is a warning "Warning: ELF header section not found" on the logs
Could this be the reason? If so how do i fix it?
What could I be doing wrong here? Good thing I used dvdrw or I would have wasted 4 dvdr's already hehehe.
ngek
This message has been edited since posting. Last time this message was edited on 17. June 2007 @ 17:30
|
Advertisement
|
|
|
grantw
Newbie
|
18. June 2007 @ 02:05 |
Link to this message
|
Hi Can my backed up ps2 games in either PAL or NTSC play on a PS3?
|