|
Official docTY Taiyo Yuden thread
|
|
AfterDawn Addict
|
8. December 2006 @ 14:16 |
Link to this message
|
rob and gus,
I think this will answer some of the questions regarding media and what TY has to offer. These were the best deals that I found of the 'haunts' I frequent the most. lol. Check it out and see what you may need for media.
DVD-R-media.html" target="_blank">http://www.supermediastore.com/taiyo-yuden-DVD-R-media.html
..........c
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
8. December 2006 @ 18:01 |
Link to this message
|
Originally posted by gus738:
ty does have printable cd-r. im wondering if ty sells non printable DVD-R? theirs sometimes i want to backup dvds without painting the surface and well it could also be cheaper price /... anyone?
i believe you are looking for the "silver shiny" TYs then, be it valueline or the premium line...unless you have a thermal printer, you can not print onto the "shiny silvers" with an inkjet...
those will probably suit your needs just fine IF your only requirements are "non printable dvd-r" :)
and yes, the valueline are cheaper...hell, the premiumline are cheaper than the inkjet printables too :P
docTY
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
gus738
Suspended due to non-functional email address
|
8. December 2006 @ 21:17 |
Link to this message
|
|
yes i know about the thermal ones but arent they more expensive then inkject? im trying to get some to sacrfise printable for cheaper price.... and silver shiny is for the holofgraic look on the dvds...
|
|
aabbccdd
Suspended permanently
|
8. December 2006 @ 22:06 |
Link to this message
|
Quote:
By the way, do you guys suggest buring at 8X or its okay to burn them at the full speed.
Yujenh burn thoses babies at 8x .16x is just to fast to burn dvds movie files
also make sure your firmware is up to date on your drive/burner to handle the 16x media
|
AfterDawn Addict
|
9. December 2006 @ 06:10 |
Link to this message
|
gus,
Here is the best deal on what I think you are looking for in TY media. These are the 'premium line' 8X DVD-R 'shiny' TY's with free shipping and paper sleeves for $65.99. What a DEAL!! Give this a look and see what I'm talking about. This is for the US btw.
taiyo-yuden-8x-DVD-R-silver-paper-sleeves-combo-200-pack.html
edit: I don't know what the deal with the link function is but it seems to have a qlitch in it for some reason. The link is to www.supermediastore.com and look for the TY DVD-R 8X 200 pack w/ free shipping and paper sleeves.
..........c
This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 06:14
|
|
aabbccdd
Suspended permanently
|
9. December 2006 @ 08:08 |
Link to this message
|
|
greensman, yes for some reason the links don't work anymore to SMS ,its been that way for several months
BTW thoses(200 TY with paper sleeves) were on sale earlier this week for 59.95
|
AfterDawn Addict
|
9. December 2006 @ 09:29 |
Link to this message
|
|
With paper sleeves and free shipping? If so that really stinks that I missed that deal. I haven't really looked for DVD's in a while because I have enough for a month or two (or 6......lol). With that said though, I would have jumped on that deal with some real aggression. lol. Good to hear from you aabbccdd.
........c
|
|
aabbccdd
Suspended permanently
|
9. December 2006 @ 09:36 |
Link to this message
|
|
yes With paper sleeves and free shipping
they aren't running many sales as of late
|
|
Yujenh
Member
|
9. December 2006 @ 10:03 |
Link to this message
|
hello guys,
i think the sale is still on for those ty with paper sleeeves
for 65.99. try this link
DVD-R-media.html" target="_blank">http://www.supermediastore.com/taiyo-yuden-DVD-R-media.html
aabbccdd was right they were 59.99 for the halloween sale and the thanksgiving sale. so i am willing to see if they goes down little more.
|
AfterDawn Addict
6 product reviews
|
9. December 2006 @ 10:08 |
Link to this message
|
|
@ greensman,
Did you get your burning problems resolved with your new system?
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
Senior Member
|
9. December 2006 @ 10:11 |
Link to this message
|
|
Sure wish they'd put on a heck of a sale on GO2+r printables 200 of them for $60.00 would really be sweet. Chris
|
AfterDawn Addict
|
9. December 2006 @ 11:26 |
Link to this message
|
Mort81,
I think that I have solved most of the problems but haven't had the "time" to get into backing up anything serious yet. I have done Lemony Snicket, The Ant Bully, and firewall in the last week and they seem to be doin ok. I purchased Pirates of the Caribbean Thursday and plan on backing it up tonight with DVD-RB Pro and RipIt4Me (Shrink) method. I'll let you know how that turns out later. As far as I can tell it is all ok.
I bought some Sata WD's (250 GB), re-installed WinXP, and a new DVD Player mainly because I hated the Zenith (it never liked any of the backups no matter the format). Now on the other hand the new Sony seems to play them like a dream. Again, we'll see what happens.
Thanks for asking btw. Good to hear from you and have a good weekend my friend.
............c
|
AfterDawn Addict
4 product reviews
|
11. December 2006 @ 12:45 |
Link to this message
|
ANYDVD UPDATE
Dear valued customer,
we would like to inform you, that a new version of AnyDVD
has been released. Here the list of fixes and improvements:
6.0.9.5 2006 12 11
- New: Added support for new versions of the SONY Arccos protection
to the option to remove "Protection based on unreadable Sectors"
- Some minor fixes and improvements
- Updated languages
The update is free for all registered customers, of course.
Just install the new version on top of your current version,
regardless which version you have installed:
http://www.slysoft.com/download.html
Have fun with AnyDVD!
Gordon Reeves
Customer Care Center
|
Junior Member
|
11. December 2006 @ 23:55 |
Link to this message
|
|
A need for some advice on burning speed
I'm using BENQ DW1640x2 Philips_DVDR1648P1 Philips_DVDR1660P1 (all with latest FW)
my media:
YUDEN000T02
YUDEN000T03
MCC002
MCC003
MCC004
I think that the YUDEN000T02 burned best on the BENQ DW1640 on @8x then on @4x speed
it appears that the MCC003 "likes" to be burned at @4X then @8X
the MCC002 R perfection on @4X
what do you think about my assumptions?
how should I burn my YUDEN000T03&MCC004(I like my BENQs best)?
great thread
|
Moderator
|
12. December 2006 @ 01:44 |
Link to this message
|
Originally posted by realrocky:
A need for some advice on burning speed
YUDEN000T03
MCC003
MCC004
how should I burn my YUDEN000T03&MCC004(I like my BENQs best)?
great thread
i currently use Benq DW1650's, and i burn the YUDEN000T03 & MCC003's perfectly at 8x every time, however i never have sufficient luck with the MCC004 at 8x so for those it has to be 4x. i also do 8x on TYG02 & TYG03 perfectly.
edited due to complete stupidy :P
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 12. December 2006 @ 04:12
|
AfterDawn Addict
|
12. December 2006 @ 03:47 |
Link to this message
|
|
@realrocky,
You might want to listen to creaky, I think he knows what he's talking about. lol.
I also have a BENQ 1650 and a BENQ 1655 (latest f/w of course). They both do fine at 8X on MCC 003, TYG03, YUDEN-T02, and 4X on Ritek R03 media. Unfortunately I haven't tried the YUDEN-T03's or the MCC 004's yet, I have so many of the above mentioned media my wife frowns on purchasing media just to "try it". lol. Looks like to me that you have found what your setup likes anyway. Burn on man!!
............c
|
Junior Member
|
12. December 2006 @ 08:59 |
Link to this message
|
|
Thanks ya both
@creaky,greensman
did you guys try lower speeds then @8x on the YUDEN000T02&MCC003 ?
|
Moderator
|
12. December 2006 @ 09:02 |
Link to this message
|
Originally posted by realrocky:
Thanks ya both
@creaky,greensman
did you guys try lower speeds then @8x on the YUDEN000T02&MCC003 ?
sure i've done 4x on MCC003 fine, i used to stick with 4x for the longest time. haven't used YUDEN000T02 though
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
12. December 2006 @ 09:06 |
Link to this message
|
|
@realrocky,
Yeah I've tried many speeds on the media in question (TY T02 & MCC 003) but they do just fine at 8X on my system. One thing that you have to remember is media can and will react differently on various machines. What works for me or creaky may not work for you. I say whatever gives you the best quality backup do that, even if it means writing at 4X on a 16X piece of media. OH!! and definitely stick with the quality media. IT MAKES A DIFFERENCE. I (and many others in this thread) know from experience. lol. Good luck.
............c
|
Junior Member
|
12. December 2006 @ 09:27 |
Link to this message
|
K guys it is as it is...
YUDEN000T02 'likes' @8x
MCC003 do the @4x
YUDEN000T03&MCC004 will go @8x
Quote:
however i never have sufficient luck with the MCC004 at 8x so for those it has to be 4x
hey creaky WTF!!! best resault on the MCC004 you get by @4x???
ohh my OCD...
|
Moderator
|
12. December 2006 @ 09:34 |
Link to this message
|
|
...only because i (too often) have MCC004 fail burning at 8x, (for me anyway) they don't seem to be very good, however i don't have any instability issues or re-copy issues with them, they just don't like burning at 8x very much; got a few hundred of them for £5 per each tub of 50 so it was rude not to buy them, i just won't rush to buy any in future. (just checked one of the tubs and their Taiwanese MCC004, not Indian ones by the way)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
12. December 2006 @ 09:35 |
Link to this message
|
|
@creaky,
Seeing that post rattles my little brain. lol. Are you still writing at 4X on those MCC 004's? I really want to try them the next sale they have on them at my local B&M's. Oh, btw are you still using the same batch or a new one to see if the "quality" has improved. Just wondering my friend.
........c
edit: got it...lol. You got that in before I posted.
This message has been edited since posting. Last time this message was edited on 12. December 2006 @ 09:37
|
Moderator
|
12. December 2006 @ 09:39 |
Link to this message
|
|
being as it's been quite some time since i converted myself from (more like prised myself off) 4x burning to 8x burning, i started out with 8x on the MCC004, but most of them fail at 8x, during the burn so i do 4x for the remaining discs (quite a lot left), but only on MCC004, everything else i do at 8x. i know i often read that it's not recommended to burn at such low speeds on 16x discs, however i have no choice with these.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 12. December 2006 @ 09:40
|
AfterDawn Addict
6 product reviews
|
12. December 2006 @ 10:07 |
Link to this message
|
|
Must be something with your particular set up creakster (everybodys is different we both know). I have no problem whatsoever burning my MCC004's at 8x and even 12x on occasion with both my litey and benq.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
Advertisement
|
|
|
Moderator
|
12. December 2006 @ 10:12 |
Link to this message
|
|
it'll be the MCC004, i do 8x perfectly on all my TY ('Verb TY' no less) like burning is going out of fashion, plus even on the new cheapy Maxell discs i just bought to try out (RICOJPNR03)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
