|
How to Burn a 360 Game (Idiot-Proof Guide)
|
|
|
ALATONY
Member
|
13. August 2009 @ 16:04 |
Link to this message
|
|
I understand everything here, my problem is that my drive doesn't recognize the game. Can anyone recommend an external drive that i can buy that is not to expensive
|
|
Advertisement
|
|
|
|
|
ADNUP
Junior Member
|
20. August 2009 @ 11:37 |
Link to this message
|
Hey everyone,
Im having a problem with some new xbox360 games. Back in november I modded my 360, used Verbatim DL+R's with Mulleter and ImgBurn. Everything worked fine. Recently I wanted to burn some games I've gotten since november and all I have are 4 coasters.
I bought Verbatim DVD+R DL for sams club, I cant tell if they are from singapore(threw out the ppackaging)
I have a Lite-On SHM-165H6S(still works fine to b/u wii and movies) I'm not sure what firmware I have, looking at old file here on the computer alot of them say ixtreme 1.4
Ideas as to what my problem is would be great....
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
JayRue
Newbie
|
20. August 2009 @ 13:50 |
Link to this message
|
Originally posted by ADNUP:
Hey everyone,
Im having a problem with some new xbox360 games. Back in november I modded my 360, used Verbatim DL+R's with Mulleter and ImgBurn. Everything worked fine. Recently I wanted to burn some games I've gotten since november and all I have are 4 coasters.
I bought Verbatim DVD+R DL for sams club, I cant tell if they are from singapore(threw out the ppackaging)
I have a Lite-On SHM-165H6S(still works fine to b/u wii and movies) I'm not sure what firmware I have, looking at old file here on the computer alot of them say ixtreme 1.4
Ideas as to what my problem is would be great....
That's the problem you are using Ixtreme 1.4. It won't work with the newer games update you firmware to ix 1.51 or 1.60 depending if you have a hitachi or not.
|
|
ADNUP
Junior Member
|
21. August 2009 @ 10:29 |
Link to this message
|
Originally posted by JayRue:
[
That's the problem you are using Ixtreme 1.4. It won't work with the newer games update you firmware to ix 1.51 or 1.60 depending if you have a hitachi or not.
Thanks, I'll try that this weekend.
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
ADNUP
Junior Member
|
21. August 2009 @ 10:52 |
Link to this message
|
I see the tutorials for stock drives but I have 1.4 on a samsung m25
Does someone have a link to a tut for a modded samsung drive?
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
ADNUP
Junior Member
|
21. August 2009 @ 19:00 |
Link to this message
|
Originally posted by JayRue:
That's the problem you are using Ixtreme 1.4. It won't work with the newer games update you firmware to ix 1.51 or 1.60 depending if you have a hitachi or not.
That was it!! Updated to 1.6 and we're all good. Thanks
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
JayRue
Newbie
|
22. August 2009 @ 00:13 |
Link to this message
|
Originally posted by ALATONY:
I understand everything here, my problem is that my drive doesn't recognize the game. Can anyone recommend an external drive that i can buy that is not to expensive
I use LiteOn works great walmart $65.00
|
|
nmc121286
Newbie
|
25. August 2009 @ 17:57 |
Link to this message
|
where do i get abgx download from and also imgburn?
thanks for all help
im a newb to this but picking it up well
|
AfterDawn Addict
|
25. August 2009 @ 18:09 |
Link to this message
|
|
Try reading the first page.
|
|
spike24
Member
|
3. September 2009 @ 15:27 |
Link to this message
|
can someone answer a question
i used imageburn to burn a game, in destination it says MATSHITA ram.cfm" class="forum_link" target="_blank">DVD-RAM UJ880AS 1.20(ATAPI)it doesn't give me the opportunity to change it,is this ok to burn the game with as i pressume this is my drive
|
|
Kockzilla
Newbie
|
15. September 2009 @ 02:21 |
Link to this message
|
Great forum! Thanks for all the wealth of info.
I've read through the threads but didn't come across a similar problem from any of the previous posts. So, here's my problem...
I just followed through both tutorials, ABGX360 tut and IMGburn tut. During the IMGburning process, after 40+ minutes the DVD tray spit out the DL DVD, only to load it back it in again seconds later (verifying it, i assumed). And then momentarily later, the IMGburn software was reading "Verifying Sector" and it was stuck at 48% for like 30 minutes. Thinking, that it was burnt completely before, and this is just the verifying stage, I ejected the disk and put it into my 360, now it's reading "Play DVD" on the dashboard, and when played, it just pops up a xbox 360 screen that can't be forwarded or move backward.
When I put the disc in the computer, Windows media opened it up and tell me that to put the game into the 360 in order to play it (something along that line).
NDarkness (or anyone that can help), if you're still on here, please shed some light on this error.
Thanks in advance.
|
AfterDawn Addict
|
15. September 2009 @ 02:25 |
Link to this message
|
It sounds like you are trying to play a Wave 3 game on iXtreme firmware that is lower than 1.51. If so then you will need to update your iXtreme firmware to the latest which is 1.6. If you have a Hitachi drive then update to 1.51 (there is no 1.6 for Hitachi drives).
Wave 3 games are all of the newest games after March I believe.
|
|
Kockzilla
Newbie
|
15. September 2009 @ 02:34 |
Link to this message
|
Awesome, thanks for the quick response bro!
It looks like I have a the BenQ drive, based on pictures from google search.
I had a guy replaced my xbox drive last year, and while at it, he flashed the drive for me. So, I don't know how to exactly "flash" it. Do you have a tutorial on this?
|
AfterDawn Addict
|
15. September 2009 @ 02:37 |
Link to this message
|
|
|
Kockzilla
Newbie
|
15. September 2009 @ 02:49 |
Link to this message
|
|
Man, that seems like a LOT of work... Thanks for the reply ND
|
|
Cuda13
Newbie
|
16. September 2009 @ 17:52 |
Link to this message
|
Hey, I've done everything step by step and am in the middle of burning my first game and its been at 50% for at least 30 minutes... The write rate says 0/0 and the log is as follows ...
I 16:35:52 ImgBurn Version 2.5.0.0 started!
I 16:35:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)
I 16:35:52 Total Physical Memory: 2,096,300 KB - Available: 1,458,324 KB
W 16:35:52 SPTD can have a detrimental effect on drive performance.
I 16:35:52 Initialising SPTI...
I 16:35:52 Searching for SCSI / ATAPI devices...
I 16:35:52 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 16:39:44 Operation Started!
I 16:39:44 Source File: C:\Documents and Settings\dad\Desktop\NFS S\pz-nfss.dvd
I 16:39:44 Source File Sectors: 3,827,488 (MODE1/2048)
I 16:39:44 Source File Size: 7,838,695,424 bytes
I 16:39:44 Source File Volume Identifier: DVD_ROM
I 16:39:44 Source File Volume Set Identifier: 356fc000MS UDFBridge
I 16:39:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:39:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:39:44 Source File File System(s): ISO9660, UDF (1.50)
I 16:39:44 Destination Device: [0:1:0] DRW-1608P2S 1.37 (F:) (ATA)
I 16:39:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)
I 16:39:44 Destination Media Sectors: 4,173,824
I 16:39:44 Write Mode: DVD
I 16:39:44 Write Type: DAO
I 16:39:44 Write Speed: 2.4x
I 16:39:44 Link Size: Auto
I 16:39:44 Lock Volume: Yes
I 16:39:44 Test Mode: No
I 16:39:44 OPC: No
I 16:39:44 BURN-Proof: Enabled
I 16:39:44 Optimal L0 Data Zone Capacity: 1,913,760
I 16:39:44 Optimal L0 Data Zone Method: Copied From Original Disc
I 16:40:13 Set L0 Data Zone Capacity Succeeded!
I 16:40:13 Filling Buffer... (40 MB)
I 16:40:14 Writing LeadIn...
I 16:40:16 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 16:40:16 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 16:40:16 Writing Layer 0... (LBA: 0 - 1913759)
I 17:00:07 Writing Layer 1... (LBA: 1913760 - 3827487)
Any help?
|
Senior Member
|
16. September 2009 @ 17:57 |
Link to this message
|
Quote:
Any help?
Update the burner's firmware, because the firmware installed is old. Use Verbatims instead of Ritek.
|
|
Cuda13
Newbie
|
16. September 2009 @ 17:58 |
Link to this message
|
|
So updating the driver should be the fix?
|
Senior Member
|
16. September 2009 @ 18:01 |
Link to this message
|
Originally posted by Cuda13:
So updating the driver should be the fix?
Not necessarily, but it's what I would do first if I was you. If you have no luck after installing the latest firmware, get some Verbatims and try those. The guy who created ImgBurn is forever telling people to just buy Verbatims on the ImgBurn forum, but people always seem to want to cut corners even when good advice is constantly rammed down their throats, lol. No offence, it's just that it's been said on here so many times.
|
|
Cuda13
Newbie
|
16. September 2009 @ 18:03 |
Link to this message
|
Oh okay.. hmm well im looking for firmware and my burner is an ASUS DRW-1608P2S and i looked all that up and the latest update i could find was 2006 and my burner is most definitely newer than that...
|
|
Cuda13
Newbie
|
16. September 2009 @ 18:25 |
Link to this message
|
|
Sorry for the double post but you said use verbatims... I intend to but i do have left over memorex/rytek discs will these still work ?
|
Senior Member
|
16. September 2009 @ 18:26 |
Link to this message
|
That burner's been around for years. The 1.37 firmware that you have installed on it is also a few years old. The latest firmware on the ASUS site is 1.41. Go here and put the model number into the search box, top left: -
http://support.asus.com/download/download.aspx?SLanguage=en-us
Quote:
I intend to but i do have left over memorex/rytek discs will these still work ?
You will only know that after you update the firmware. There's no guarantee that Verbatims will work on it either, because it's an old drive that hasn't been updated in ages, but at least if you do end up having to buy a new drive, you'll already have some discs to use with it. :D
This message has been edited since posting. Last time this message was edited on 16. September 2009 @ 18:28
|
|
Cuda13
Newbie
|
16. September 2009 @ 19:05 |
Link to this message
|
okay i just reburnt disc and i got 100% going to test it now..after that ill update the firmware...how would i install that firmware i looked for a read me but could find none
|
|
GTA2787
Member
|
26. September 2009 @ 10:25 |
Link to this message
|
Originally posted by Cuda13:
okay i just reburnt disc and i got 100% going to test it now..after that ill update the firmware...how would i install that firmware i looked for a read me but could find none
Which firmware are you talking about. The dvd firmware or ixtreme firmware
|
|
Advertisement
|
|
|
|
GTA2787
Member
|
26. September 2009 @ 10:29 |
Link to this message
|
i guess the latest is 1.41.i know its in 2006 go ahead and install it.
Follow these instructions
1. Define your ASUS CD-ROM device model.
2. Define your operating system to install your ASUS CD-ROM device
3. Search CD-ROM driver category
4. Find ASUS CD-ROM driver
5. Select ASUS DRW-1608P2S DVD-RW Firmware 1.41 Windows 98SE/ME/2000/XP
6. Download ASUS DRW-1608P2S DVD-RW Firmware 1.41 Windows 98SE/ME/2000/XP
7. Install ASUS DRW-1608P2S DVD-RW Firmware 1.41 Windows 98SE/ME/2000/XP
8. Restart or reboot your computer to finish your driver installation.
|
