|
HOW TO BURN PS2 DVD GAMES "YOU MUST USE A MODCHIP"
|
|
AfterDawn Addict
|
14. November 2005 @ 21:57 |
Link to this message
|
The Duo 2 is a good chip. Burn at 4x on an 8x DVD-R. If you're backing up and original, make sure to set the read speed to 1x. Otherwise are you using DVD-R's, DVD+R's, DVD-RW's, what? Make sure you're operating the Duo2SE properly:
PS2 games
Method 1:
-Press EJECT button to switch on the machine.
-Insert PS2 game in tray.
-Tap RESET button once, the machine would reboot and then load your game.
Method 2:
- Press EJECT button to switch on the machine.
- Insert PS2 game in tray, the press EJECT button to close tray.
- The disc will then take 2-5 seconds to be recognized and then boot.
To boot another game when already playing a game.
- Press EJECT button.
- The current game would then pause and the tray would come out.
- Change to another PS2 game disc and tap RESET button once.
- The machine would reboot and then load your game.
PSX games
- Press EJECT button to switch on the machine.
- Insert PSX game in tray, then press and hold RESET button to switch off machine.
- Now hold the RESET button to start up your machine. Only release the RESET button once the Blue LED light of the Eject button lights up.
DVD movies
- Press EJECT button to switch on the machine.
- Insert DVD movie in tray, then press and hold RESET button to switch off machine.
- Now hold the RESET button to start up your machine. Only release the RESET button after like 4-5 seconds.
Disable Mode
- Hold the RESET button for like 4-5 seconds to boot up your machine.
|
|
Advertisement
|
  |
|
|
|
xsabox
Suspended due to non-functional email address
|
14. November 2005 @ 22:13 |
Link to this message
|
thanks for the reply
Sony DVD-R is what I'm tryin to burn it on ... and when you say
"If you're backing up and original, make sure to set the read speed to 1x."
do you mean write speed to 1x? If not, then how do I set the read speed to 1x when I'm backing up the original?
|
AfterDawn Addict
|
14. November 2005 @ 22:40 |
Link to this message
|
That's if you are backing up a game you own. If you are just burning one you downloaded, don't worry about it. Burn at 4x on an 8x DVD-R using DVD Decrypter. Sony DVD-R's should be fine. If you are creating a backup for a game you own, go to Tools--> Settings -->Device check set read speed, and set it to 1x. What game are you trying to burn?
|
|
xsabox
Suspended due to non-functional email address
|
14. November 2005 @ 22:55 |
Link to this message
|
|
The games are Resident Evil 4 and NBA 2K6 ...
I'm doing what you said with the 1x speed and yes I have the original, I'll get back to you with the results ...
thanks for the help ...
|
|
Pirated0
Suspended due to non-functional email address
|
15. November 2005 @ 06:56 |
Link to this message
|
|
Is it ok if i used magic iso instead of isobuster cause it basicly does the same thing
//(.)(.)\\ I like big Buubzzz!!!
|
|
dude3
Junior Member
|
15. November 2005 @ 07:31 |
Link to this message
|
|
i don get it listen
1.i go to: mode, iso, wright
2.but when i go to an image with a document and magnascope on it. ok i click on it with the folder with an mds file only but no iso file
HELP ME!!!!
ps.have isobuster don no how to use it though.
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 11:34
|
|
xsabox
Suspended due to non-functional email address
|
15. November 2005 @ 07:36 |
Link to this message
|
|
Still didn't work ... copyed the game at 1x speed and burned it at 4 and nothing ...
|
|
Pirated0
Suspended due to non-functional email address
|
15. November 2005 @ 07:58 |
Link to this message
|
The link that you left for me on how to rebuild an iso it says that to burn with Nero. would burning with Nero still work on my ps2 or DVD Decrypter is the best way to go???
//(.)(.)\\ I like big Buubzzz!!!
|
AfterDawn Addict
|
15. November 2005 @ 12:22 |
Link to this message
|
A. The main purpose of Isobuster is to extract the game files to a different folder, then place them into Nero in the same order they're listed in Isobuster. You have to use Nero, using DVD Decrypter won't work. You can using it to create the initial image, but the rebuilt game must be burned with Nero. This question goes to everybody, what kind of DVD's are you using?
|
|
dude3
Junior Member
|
15. November 2005 @ 13:21 |
Link to this message
|
|
ok explain to me what i should do and slowly.
ps. i only have 1 maxell dvd-r left.
pps.gotta return game by 12:00 tonight.
ppps.im using a dnas game named ratchet deadlocked
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 13:22
|
AfterDawn Addict
|
15. November 2005 @ 13:33 |
Link to this message
|
|
There isn't much to explain. Go into DVD Decrypter. Go to Tools-->Settings-->Device. Check set read speed, and set it to 1x. Then insert ratchet into your DVD burner and go to MODE-ISO-READ. Then click Decrypt. It'll take an hour or so for the file to finish. When it's done you'll have an iso and a mds file. Go to MODE-->ISO-->WRITE and browse to the mds file. Double click it. Set the write speed at 4x. Click Decrypt. Your DVD will say what speed it is, 4x, 8x, 16x, on the top of the disc. If it's a 4x disc, go ahead and burn at 1x. If it's 16x, burn at 4x, same for an 8x disc. All DNA's means is that the game will be need patched to play online, it has nothing to do with copying the disc. You do have Swap Magic, a modchip, or some type of mod to boot a backup copy of the game, right?
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 13:35
|
|
dude3
Junior Member
|
15. November 2005 @ 14:59 |
Link to this message
|
|
got a mod chip i think v 2 mod chip forgot
|
Senior Member
|
15. November 2005 @ 15:00 |
Link to this message
|
hello guys, this is my frist post ever on here and i love the help you give people.
i just want to make sure i have all this worked out.
i got 16x memorex dvd-r's. and DVD Decrypter. and latest swap magic.
is all i do is pop my ps2 game in dvd burner, go to DVD Decrypter, mode=iso=read.wait for it, than go to mode=iso-write. is that it?
do i need to change any setting like write speed or something else?
thanks lot
Peen!
|
|
xsabox
Suspended due to non-functional email address
|
15. November 2005 @ 15:11 |
Link to this message
|
|
I just figured out what was wrong ... for some reason, only Verbatims seem to work on my Duo2 and nothing else ... burned it again and the Verbatim worked perfect but Memorex and Sony don't ... I understand the Memorex, but why Sony?
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 16:34
|
|
dude3
Junior Member
|
15. November 2005 @ 15:41 |
Link to this message
|
|
question i go to device and there is a box it says this
options:
set read speed: (box)
read speed: max
enable speedread (plexter) (box)
set hadware error retries: (box with 2 in it and a down arrow)
______________________________________________________________________ps. i have a maxell dvd-r 8* so do i read the disc speed in 4*
star means the multiplecation sigh
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 15:51
|
|
dude3
Junior Member
|
15. November 2005 @ 16:30 |
Link to this message
|
sorry when you say
Quote:
All DNA's means is that the game will be need patched to play online, it has nothing to do with copying the disc.
dose that mean i need a patch even if i don need onlione to play the game
|
AfterDawn Addict
|
15. November 2005 @ 18:21 |
Link to this message
|
|
Just set read speed to 1x. That's it. I am playing a Soul Reaver 2 right now, which I rented from gamefly and copied, and it works fine. I set the read speed to 1x, didn't mess with anything else. MODE-->ISO-->READ then clicked Decrypt. It was done creating the iso in 45 mins. I went to MODE-->ISO-->WRITE, loaded the mds file, set the write speed to 4x and clicked Decrypt. I burned it to Maxell DVD-R's, and it works fine. There was some minor skipping during cut scenes, because the rental is badly scratched. Aside from that it works great.
|
|
dude3
Junior Member
|
15. November 2005 @ 19:25 |
Link to this message
|
|
crap it didn't work i don get it i did what u told me im so pissed off.
if there is some other way please tell me .im going to sleep now so read ya till tommaro.
ps.tell me if the disk you used to burn the game from the bottom of the disk if it was blue.
oh and this is what hapenns when i turn on my ps2
1.some boxes with colored lights flying around.
2.some white lights form a circle.
3.some red boxes come up.and it says to insert a playstation or playstation 2 game into it.
hope this help you to figure out my problem.
pps.it only took it 18min to read and right the image and 22min to burn.
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 19:26
|
Member
|
15. November 2005 @ 19:36 |
Link to this message
|
|
this might be a stupid question just got make sure to play these copied games u need some sort hack device to play...ie swap disks or mod chip
correct???
|
AfterDawn Addict
|
15. November 2005 @ 19:49 |
Link to this message
|
1. Q. How do I burn PS2 games?
A. Use DVD Decrypter. Guide: http://www.angelfire.com/games6/easytutorial/dvddec/dvddec.html Burn at 4x on an 8x DVD-R.
2. Q. Does the type of media I use matter?
A. YES: http://forums.afterdawn.com/thread_view.cfm/3/240341
If you're too lazy to read, use Taiyo Yuden, Verbatim, Ritek, Sony, TDK, Maxell, Sony or Phillips DVD-R's. Avoid Memorex, Staples, Imation, etc.
3. Q. Do I need some type of mod to play PS2 backups or imports?
A. Yes you need a modchip: http://teammodders.com/ps2_mc.php?ex=2 Swap Magic: http://swapmagic3.com/ Memory Card Exploit (Doesn't work with v.11 PS2 and later): http://forums.afterdawn.com/thread_view.cfm/109289 HD Loader: http://www.hdloader.com.au/hardinstall#prepare or
HD Advance: http://www.hdadvance.com/hd_advance_how-to-use.htm
What kind of discs are you using dude3?
|
|
buckchoy
Newbie
|
16. November 2005 @ 03:06 |
Link to this message
|
|
hi
is there anyway to run copyed ps2 games without a mod chip ???
also why dose my ps2 play copyd dvd movies ???
|
|
chimeleon
Newbie
|
16. November 2005 @ 04:08 |
Link to this message
|
|
Hi,
There is a specifik dvd recorder to make a backup for ps2?
My dvd recorder is a Samsung , and i try 2 time to make a backup with a file that i'am dl from emule and it doesn't work.
Thanks
|
|
dude3
Junior Member
|
16. November 2005 @ 04:31 |
Link to this message
|
|
oh and this is what hapenns when i turn on my ps2
1.some boxes with colored lights flying around.
2.some white lights form a circle.
3.some red boxes come up.and it says to insert a playstation or playstation 2 game into it.
these are the sighns i get.
and this is how i decrpt my games and burn
1.go to tools,setting,device.
2.click the box and make the disk reading 1
3.i pick a folder for the image to go to.
4.i start burning the image.
5.when im done i change my game with a maxell dvd-r
6.i then go to mode iso wright.
7.i pick the mds file and put the disk read onto 4.
8.then i start burning.
hope this HELPS!!!!
ps. i don know why but a mds file only appers no iso when i go to source.but when i go to the document with the mds file there is on i00 and ioi file no mds.
This message has been edited since posting. Last time this message was edited on 16. November 2005 @ 04:41
|
|
buckchoy
Newbie
|
16. November 2005 @ 04:44 |
Link to this message
|
|
still confused
can you run copyed games without a chip???
|
|
Advertisement
|
|
|
|
AFragassi
Newbie
|
16. November 2005 @ 04:47 |
Link to this message
|
Tokijin you were very helpful last time. I am just curious to if you have any sort of text you can send on burning games that don?t need to be rebuilt since I will be using a mod chip that doesn?t require them to. Sounds stupid because their have been a thousand requests for burning information, but I'm not sure if I still need DVD decryptor, or isomagic or if I can burn directly using Nero and a DVD-R. Thanks for the info.
|
