|
Post your DISC quality scans here 2
|
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 04:38 |
Link to this message
|
whoops, forgot the scan, here it is.
|
|
Advertisement
|
|
|
|
Moderator
|
11. November 2008 @ 07:04 |
Link to this message
|
Originally posted by omegaman7:
As well as switching to X64bit operating. then I can run all my drives. :)
without me wanting to derail the thread (again!), you don't need a 64-bit system just to run loads of drives, i'd already demonstrated that in one of my previous replies..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 11. November 2008 @ 07:05
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 08:06 |
Link to this message
|
i was just getting ready to say the same thing Creaky.
Omegaman. you dont need to go with a 64bit OS to burn multi-burns. i have XP home 32bit and burn them fine.
one thing i will tell you about the multiple burns with Nero. your not gonna get the awesome burns with all the drives you use that you would if you did them 1 at a time.
your asking 1 program(Nero) to do alot at once. it cant do it.....
personally i dont think there is anything wrong with your drive. that last burn looks great. 203 total PIF's thats great i would take that every time out if i could get it.you say that drive has alot of burns on it? it could be going south on you but i think from the scans you have posted they dont look bad at all if your doing the multiple burns like we have been talking about. if you look at my 4 burns i just did. the first one looks good then the second one looks OK then the last to get worse. i posted the scans in the order the drives are setup in my rig,which is the way Nero burns them number 1 position down to number 4. the last drive being the so called worse burn.
no this is just my opinion. when i have burnt torrent stuff i dont get as good scans than when i burn ripped stuff or on the fly stuff.
i dont know if anything your burning is torrent stuff, so that could be the difference in some of your burns as well.
i think i have a couple torrents left on the hdd now. i will burn one of them then ill rip a disc to the hdd then burn it, then do one on the fly and post all 3 scans.
edit:
i dont have anything to rip that i dont have to run through dvdreb.so i have a torrent file and theon one on the fly.
torrent file here
on the fly here
This message has been edited since posting. Last time this message was edited on 11. November 2008 @ 10:02
|
AfterDawn Addict
|
11. November 2008 @ 10:41 |
Link to this message
|
@omegaman7
get your drives from newegg.com usually all under $30 some with free shipping. I've bought 3 from them this year. including Otiarc 7200S (NEC) and an optiarc 7191S (LiteOn)
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 11:19 |
Link to this message
|
|
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 13:03 |
Link to this message
|
1. 64 bit operating has me curious. (I like tackling new things)
2. Its obvious my drives going south. Though its curious that the scans are worse when ran through nero. COULD be coincidence. It almost looks like the laser engages HOT. IS THAT POSSIBLE? EVERY DISC from the get go has had the lead in problem. IM PICKY.
3. Im buying one right now.
4. I thought the only way to run more than 2TB SIMULTANEOUSLY was to be running 64bit operating. Ive experienced a hangup when more was installed.
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 13:36 |
Link to this message
|
Im afraid I cant buy any of those right now. My board only has 2 sata ports and there taken by my precious HDD's. LOL. I suppose I could get an add on card, but I cant do it right now. OH god this has me irritated. I bought this drive on mwave over a month ago. Theres no way they would take it back now. And besides, its backed up quite a bit, so its paid for itself. I'm just gonna have to watch it like a hawk for now. Quite a few mixed reviews on the pioneer. Ive tried pioneer products in the past, NOT IMPRESSED.
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 13:44 |
Link to this message
|
omegaman those drives i choose are sata but the same drives come in ide form as well.
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 14:49 |
Link to this message
|
|
Hah hah, good to know. You guys understand what im dealing with dont you? Im seeing visible flaws in the disk. I think if you REALLY new what im dealing with you would be just as critical. People want their discs to last a long time. This drive apparently isnt up to the challenge. Its a quick ripper though. It'll still serve a purpose. :)
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 15:06 |
Link to this message
|
LOL Omegaman.
yes we understand what your saying about the disc. we all have had the same type of flaws in disc from time to time.PLus in your situation your drive might be going south on you as well.some drive can use them disc with the flaws and some dont do as well and some wont use them no matter what. if iwas you i would buy a 10 pack of some cheapy brand disclook them over and burn them and see what ya get. hell where ya at i can send you some office depot 16x +/- r's ritek's let ya play with them.
hey me as well as a few others here are allways up for a reason to get a new drive..lol hell some dont need a reason they just need the time to hit the buy button.. ;)you know how you are ;)~
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 15:13 |
Link to this message
|
Originally posted by omegaman7:
1. 64 bit operating has me curious. (I like tackling new things)
4. I thought the only way to run more than 2TB SIMULTANEOUSLY was to be running 64bit operating. Ive experienced a hangup when more was installed.
ive never heard that about the 2TB of hdd space not being seen on a 32bit system, i do know it wont see mre than 3.5gb of mem(give or take a 100-200mhz)
i know a few guys here Creaky & Sammorris have more than 2TB of hdd space and they dont have 64bit...now ya got me curious about that..lol
|
Moderator
|
11. November 2008 @ 15:27 |
Link to this message
|
|
yup, 13x 500GB here so roughly 7.5TB :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 15:29 |
Link to this message
|
|
And their running simultaneously? Wiki suggested otherwise! :(
|
Moderator
|
11. November 2008 @ 15:32 |
Link to this message
|
|
I don't know what wiki you're referring to but i'm sat next to 6 internal SATA's along with 7 in USB2.0 enclosures, all spinning (very quietly, one of the reasons i like WD5000AAKB/AAKS drives).
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 11. November 2008 @ 15:34
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 15:33 |
Link to this message
|
I have some riteks. Give me some time. Im running the rebuilder right now with CCE :D HBOY2 if your curious. it should be finished in under an hour.
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 15:35 |
Link to this message
|
|
ok. Maybe that has something to do with external drives. ??? But, when I crossed the 2TB threshold, it hung up. 2tb runs fine, if I cross it, OHHH BABY LOL
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 15:42 |
Link to this message
|
|
if ya dont mind me asking what type of rig do you have? specs?
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 15:57 |
Link to this message
|
Athlon 5200+, Gskill 6400 2gbram, WD FALS 1TB (NON GREEN), WD 500gb AAKS, WD 500gb AAKB (ran via usb), mainboard is an MSI MBOX barebone, Model MS-7309. Asus nvidia 8600GT PCI-E, 20" wide Acer Mon., 4 opti drives, 2 DRU 830s, My litey LH-20A1H, and an 840DRU(FAILING).
Ram is maxed, sata ports are maxed, ide maxed, The only thing not maxed is the Cpu socket. Could go with a paticular 6000 athlon, 89W version. But Im gonna build a new comp, sooo...
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 17:04 |
Link to this message
|
Heres a ritekG04 mini dvd-r. The only other riteks I have are Cd-r. And I only burn those in the lite-on. As you can see I still have that leadin freak.
|
AfterDawn Addict
|
11. November 2008 @ 17:08 |
Link to this message
|
well I would take the failing drive out and put the ide Optiarc 7200 NEC in it's place. Your Litey is the ide version of my 20A1S I have both of these in sata drives-optiarc and the litey. Write withe opti mostly but don't hesitate to use the Litey.
I also just made a test on-the-fly copy of Hellboy II from a NeroRecode disc with Nero Express @x16 on a ricohjpn 03 +R. Scanned out at a 94. Not bad on the Optiarc 7200S, read from the Litey 20A1S.
I'll bet you've never noticed that PIErrors spike at beginning,watching the movie??
This message has been edited since posting. Last time this message was edited on 11. November 2008 @ 17:23
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 17:24 |
Link to this message
|
hmmmm... I gather you like your opti? Ive read some bad reviews. I work at UPS. Most packages are handled with care, but we do get alot of 18 -22 Yr olds that are fresh into the work force and dont quite get it yet. I guess I dont like buying delicate technologies online. ESPECIALLY lcd tvs. I bought my lite-on at officemax. LOVE IT. I suppose I could give the opti a shot. Thanks for your imput. :D And I suppose NEWEGG does package well.
|
AfterDawn Addict
7 product reviews
|
11. November 2008 @ 17:26 |
Link to this message
|
|
You've seen visual defects caused by PIE's? Cant say i have.
|
AfterDawn Addict
|
11. November 2008 @ 17:30 |
Link to this message
|
since buying dvd burners from newegg.com I have not had a problem with the shipping. They are packed well and they will take them back in a second if there is a problem. Never had one. The NEC optiarcs are good. it's the Litey Optiarcs that are getting the bad reviews. I have both varieties and like the Optiarc 7200S. I've bought two BenQ dw 1655s from them and all was great. a total of 5 drives in 3 years for 2 pcs. It was depressing leaving my Bqs in the old pc. LOL
|
AfterDawn Addict
4 product reviews
|
11. November 2008 @ 17:40 |
Link to this message
|
|
i think it was ZOSO that had that same problem with his lead in like that. he has a couple plexter drive 810's i think. he had that issue for awhile i forget what he did to fix it...does anyone else remember that? or how he fixed? ZOSO you out there??? we need your help
|
|
Advertisement
|
|
|
Moderator
|
11. November 2008 @ 17:44 |
Link to this message
|
|
In a way i'm sure glad i have no pc's/enclosures/anywhere free as all this talk of AD-7200S's is making me contemplate buying a few, they're £14.50 here, maybe cheaper if i shop around, that's silly money!
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
