|
HOW to backup WII GAMES.(guide)
|
|
|
|
|
bigd1234
Junior Member
|
18. September 2007 @ 17:24 |
Link to this message
|
Originally posted by djcb:
Can you use any dvd burner or just an LG model?
If you have the ISO already....any dvd burner.
If you need to rip the game, you need one of the LG DVD-ROM drivces to rip the game to an ISO. Then you can burn with any dvd burner.
|
|
Advertisement
|
 |
|
|
|
b4rtj4h
Junior Member
|
18. September 2007 @ 22:17 |
Link to this message
|
|
For the newer Wii's Use this:
www.wiikeyguide.com/wiikey-install-guide.html
It is moddable, i modded a few (3x)
Wii + Wiikey = WiiFun :P
|
|
djcb
Junior Member
|
19. September 2007 @ 16:42 |
Link to this message
|
|
Do i need to chip my wii so if i need do need to use one of the backup discs it will work ?
|
|
bigd1234
Junior Member
|
20. September 2007 @ 13:40 |
Link to this message
|
Originally posted by b4rtj4h:
For the newer Wii's Use this:
www.wiikeyguide.com/wiikey-install-guide.html
It is moddable, i modded a few (3x)
Yes, those are the D2B chips.
So far there is not a compatible modchip for the D2C chips.
|
|
bigd1234
Junior Member
|
20. September 2007 @ 13:48 |
Link to this message
|
Originally posted by djcb:
Do i need to chip my wii so if i need do need to use one of the backup discs it will work ?
You need to install a chip to play backup disks.
|
|
jyeh74
Junior Member
|
20. September 2007 @ 18:09 |
Link to this message
|
I've been using isonunt and mininova. But everytime I've finished downloading the 4.4 gig iso file, and try to open it, it says file is unrecognized or not recognized. Why is that? I download the ones with a lot of seeds and leechers. This is when I try to winrar it. Anyone else get this error? I'm using peer guardian and uTorrent.
|
|
b4rtj4h
Junior Member
|
20. September 2007 @ 23:10 |
Link to this message
|
|
You need to download "extract now" to open these files without any errors :D... Look it up on google :D
Wii + Wiikey = WiiFun :P
|
|
dazman18
Newbie
|
21. September 2007 @ 03:52 |
Link to this message
|
|
Hi there,im new to the modding scene.Ive read this thread from page 1 and done everything stated to start making my backups but im faced with a problem a few of you have encountered,when im using rawdump 2.0 it keeps saying an error has occured and that the pointer has been moved etc.Ive gone to device manager,then to IDE channel primary and secondary and then changed transfer mode to PIO only,but it hasnt solved the problem,it keeps re-occuring !! Can anyone shed some light? Please its doin me head in,any help much appreciated,thanks.
|
|
b4rtj4h
Junior Member
|
21. September 2007 @ 04:18 |
Link to this message
|
Originally posted by dazman18:
Hi there,im new to the modding scene.Ive read this thread from page 1 and done everything stated to start making my backups but im faced with a problem a few of you have encountered,when im using rawdump 2.0 it keeps saying an error has occured and that the pointer has been moved etc.Ive gone to device manager,then to IDE channel primary and secondary and then changed transfer mode to PIO only,but it hasnt solved the problem,it keeps re-occuring !! Can anyone shed some light? Please its doin me head in,any help much appreciated,thanks.
You do not have the right .NET version installed !! Or you hava a foulty drive
Wii + Wiikey = WiiFun :P
|
|
dazman18
Newbie
|
21. September 2007 @ 05:36 |
Link to this message
|
|
I have NET Framework 2.0 installed,is this not correct then?
|
|
dazman18
Newbie
|
21. September 2007 @ 10:19 |
Link to this message
|
|
Ive been on it all day now and still no further.Ive uninstalled drives and re installed them,wiped off raw dump 2.0 and net framework 2.0.Downloaded them again (net 2.0 first)Started up in safe mode,changed DMAS to PIOS in every consivable combination and still im gettin error"an attempt was made to move pointer before the beggining of the file".I press start dump and it ses finding seeds then when it changes to dumping the error comes up.Am i missing something out? Frustrating doesnt come close,please help me :-(
|
|
jyeh74
Junior Member
|
21. September 2007 @ 13:21 |
Link to this message
|
Originally posted by b4rtj4h:
You need to download "extract now" to open these files without any errors :D... Look it up on google :D
What you mean? I just click "download torrent" and wait till it gets finished. I click the 4.5 gig winrar file when it is done to extract it, that is when I get the error.
|
|
bigd1234
Junior Member
|
21. September 2007 @ 13:35 |
Link to this message
|
Originally posted by jyeh74:
Originally posted by b4rtj4h:
You need to download "extract now" to open these files without any errors :D... Look it up on google :D
What you mean? I just click "download torrent" and wait till it gets finished. I click the 4.5 gig winrar file when it is done to extract it, that is when I get the error.
What is the extension on the file?
|
Member
|
21. September 2007 @ 15:03 |
Link to this message
|
Originally posted by dazman18:
Ive been on it all day now and still no further.Ive uninstalled drives and re installed them,wiped off raw dump 2.0 and net framework 2.0.Downloaded them again (net 2.0 first)Started up in safe mode,changed DMAS to PIOS in every consivable combination and still im gettin error"an attempt was made to move pointer before the beggining of the file".I press start dump and it ses finding seeds then when it changes to dumping the error comes up.Am i missing something out? Frustrating doesnt come close,please help me :-(
hey i had the same problem and i changed my mode to PIO aswell but i GUARANTEE you itis 100% a physical problem with the dvd,jus wipe n try again, fortunately this does not corrupt the ISO in the making in any way, trust me its all about persistance. There really should be a sticky to this problem coz it happens all the time and no-one really replies to people when they ask about it. Hope this helps. -sLibs
|
|
jyeh74
Junior Member
|
21. September 2007 @ 16:20 |
Link to this message
|
|
the file extension is usually a .iso or a bunch of .rar
When it is a .rar, after I have downloaded them all, I click on the first rar file and it unzips all of them. Either way, there is a problem reading it. Not sure why.
|
|
ynothuy
Suspended due to non-functional email address
|
21. September 2007 @ 21:14 |
Link to this message
|
hey i am having problems detecting my lg GDR-8164b through rawdump- i scroll down there is only pioneer -
when i go into motherboard setup it says there are only '3 sata(or wotever drives)' my 2 hard disks and pioneer dvd burner - i am connecting my lg drive by hdd cables because i the lg drives doesnt support the sata cables- help plz? what do i need 2 do-
(may not even have anything to do with the sata thing) i am using vista btw , thanks in advance
This message has been edited since posting. Last time this message was edited on 21. September 2007 @ 21:42
|
|
bigd1234
Junior Member
|
22. September 2007 @ 05:02 |
Link to this message
|
Originally posted by ynothuy:
hey i am having problems detecting my lg GDR-8164b through rawdump- i scroll down there is only pioneer -
when i go into motherboard setup it says there are only '3 sata(or wotever drives)' my 2 hard disks and pioneer dvd burner - i am connecting my lg drive by hdd cables because i the lg drives doesnt support the sata cables- help plz? what do i need 2 do-
(may not even have anything to do with the sata thing) i am using vista btw , thanks in advance
Go back into the BIOS (Motherboard Setup). You will need to go under EIDE or IDE and make sure everything is set to AUTO or AUTO-Detect. You should also make sure that the drive is jumpered CS or Cable Select.
You do not need to boot all the way into Windows, to see if the drive will show up. You only need to verify that the drive shows up in the BIOS. If the Drive is not detected in the BIOS, Windows will not detect it.
|
|
bigd1234
Junior Member
|
22. September 2007 @ 05:06 |
Link to this message
|
Originally posted by jyeh74:
the file extension is usually a .iso or a bunch of .rar
When it is a .rar, after I have downloaded them all, I click on the first rar file and it unzips all of them. Either way, there is a problem reading it. Not sure why.
Are there any PAR2 files included? If so, run the file with the .Par2 extension. You will need the application QuickPar installed. This will make sure that the RAR files are correct.
|
|
dazman18
Newbie
|
22. September 2007 @ 08:14 |
Link to this message
|
Thanks Slibs,took out my wii sports and tried wii play,worked perfect.Im tryin a couple of my other games now RAYMAN,MONKEYBALL AND ZELDA but its not workin the same again,Its finding image an dumping but seems to be stop starting.Timer on 832:56:42 at moment? I assume that means hrs? Is there any advice on cleaning discs,like you say if its physical then it can only be the disc.Ive wiped them but they are still uploading sporodicly,thanks.
|
|
jyeh74
Junior Member
|
22. September 2007 @ 11:15 |
Link to this message
|
|
Bigd1234, there are no PAR2 files, only a bunch of rar files. So when I'm done downloading them, I usually click on the first rar file and it does the extract for the rest. It will get about halfway complete and get an error message.
|
|
Ferris242
Newbie
|
22. September 2007 @ 14:45 |
Link to this message
|
Hi all, great thread!
I have a problem, here's my situation.
- Wiikey added today to my 3.0e wii by a game shop
- Downloaded a game today
- it was already in iso mode, no need to unscramble
- burned with ImgBurn 2.3.2.0 on a Verbatim +r with a LG GMA-4082N burner
My wii doesn't detect the disc when I insert it.
What can the problem be?
Thanks,
Ferris
|
|
pmedved
Newbie
|
22. September 2007 @ 15:36 |
Link to this message
|
|
Just purchased Game Copy pro. According to GameCopy Pro their FAQ's their software will allow you to make backup copies of Wii games without a Mod Chip. Is this incorrect. Everything I am reading including links on GameCopy Pro membership pages says you have to install a mod chip.
______________________________________________________________________
From their FAQ page
Will I need to install a Mod Chip on my console to play my backup game?
Game Copy Pro now includes information on how to play all of your favorite games on you PC, no console, or mod chip needed!
______________________________________________________________________
I wasn't intending to install a Mod Chip, that's why I read through the FAQ's before purchasing, now from what I am reading they are not stating the truth about their software or am I missing something?
Also if you live in the US, you cant get bit torrent from their website. So their bonus "Free Game Downloads" ...isn't
Phil
|
Member
|
22. September 2007 @ 22:21 |
Link to this message
|
Originally posted by dazman18:
Thanks Slibs,took out my wii sports and tried wii play,worked perfect.Im tryin a couple of my other games now RAYMAN,MONKEYBALL AND ZELDA but its not workin the same again,Its finding image an dumping but seems to be stop starting.Timer on 832:56:42 at moment? I assume that means hrs? Is there any advice on cleaning discs,like you say if its physical then it can only be the disc.Ive wiped them but they are still uploading sporodicly,thanks.
windex LOL not the best but alcohol or something in that nature, i used a cloth or even paper towel but u have to be very careful because scratches are so easily manifested, im sure you can buy cleaning kits or even devices that scratches off a layer but im ok with just wiping them with anything that wont damage it, sometimes it takes me 5-10 wipes before it actually gets past a certain section of the dvd, i ussually look at how big the ISO is when it stops so i know where it last stopped and if i went past it, hope that helps
|
Member
|
22. September 2007 @ 22:27 |
Link to this message
|
Originally posted by pmedved:
Just purchased Game Copy pro. According to GameCopy Pro their FAQ's their software will allow you to make backup copies of Wii games without a Mod Chip. Is this incorrect. Everything I am reading including links on GameCopy Pro membership pages says you have to install a mod chip.
______________________________________________________________________
From their FAQ page
Will I need to install a Mod Chip on my console to play my backup game?
Game Copy Pro now includes information on how to play all of your favorite games on you PC, no console, or mod chip needed!
______________________________________________________________________
I wasn't intending to install a Mod Chip, that's why I read through the FAQ's before purchasing, now from what I am reading they are not stating the truth about their software or am I missing something?
Also if you live in the US, you cant get bit torrent from their website. So their bonus "Free Game Downloads" ...isn't
try searching the forum coz i think i saw a pst about this, apparently its bs but i dont know first hand, IMO i'd just get the wii chipped, its safer IF you do a little research, i say if because of firmware updates, bricking etc.
|
|
Advertisement
|
|
|
|
ynothuy
Suspended due to non-functional email address
|
23. September 2007 @ 01:02 |
Link to this message
|
Originally posted by bigd1234:
Originally posted by ynothuy:
hey i am having problems detecting my lg GDR-8164b through rawdump- i scroll down there is only pioneer -
when i go into motherboard setup it says there are only '3 sata(or wotever drives)' my 2 hard disks and pioneer dvd burner - i am connecting my lg drive by hdd cables because i the lg drives doesnt support the sata cables- help plz? what do i need 2 do-
(may not even have anything to do with the sata thing) i am using vista btw , thanks in advance
Go back into the BIOS (Motherboard Setup). You will need to go under EIDE or IDE and make sure everything is set to AUTO or AUTO-Detect. You should also make sure that the drive is jumpered CS or Cable Select.
You do not need to boot all the way into Windows, to see if the drive will show up. You only need to verify that the drive shows up in the BIOS. If the Drive is not detected in the BIOS, Windows will not detect it.
thanks a lot, tho i havnt got it working lol, what is a jumpered cs or Cable select, i am using a HDD cable to connect it- my bios doesnt have eide or ide - says sata 1,2,3,4 number 4 says not detected- in bios it does not show my lg drive but after it does(think its asking if i want to boot from it) i can still use it to read dvd and cd's.
wen i use rawdumper it only has pioneer then i click on the convert raw to iso - it then opens a screen where i need to open somthing- i click on my LG drive and it takes a while to load- then it says ''the disc might be corrupt. make sure the disc uses a format that windows recognizes. If the disc isunformatted, you need to formate it before using it''
please can any1 help me, ive bought this drive 3days ago and ive not been able to use it for its 'purpose' lol
|
